Application of sodium chloride as space holder for powder injection molding of alloy Titanium-Hydroxyapatite composites

QRコード

Application of sodium chloride as space holder for powder injection molding of alloy Titanium-Hydroxyapatite composites

The development of porous metal structures, especially for the use of titanium alloys in bone implant applications, has attracted the attention of researchers. However, forming porous structures in titanium composites via powder injection molding (PIM) remains in the early stages of analysis, allowi...

書誌詳細
出版年:	Journal of Materials Research and Technology
第一著者:	2-s2.0-85106916632
フォーマット:	論文
言語:	English
出版事項:	Elsevier Editora Ltda 2021
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85106916632&doi=10.1016%2fj.jmrt.2021.02.087&partnerID=40&md5=2bec9bc35f0e1e3062e46fbffa9739b9

類似資料

Mathematical modeling of plastic injection molding parameters to study the product quality through mechanical property evaluation
著者:: Venkatason K.; Sivaguru S.; Paizar A.R.; Roseley N.R.N.
出版事項: (2023)

Surface Characterization of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System
著者:: Saedon, 等
出版事項: (2024)

Multi-objective Optimization of Turning Titanium Alloy by Grey Rational Analysis
著者:: Nor N.H.M.; Ahmad S.; Othman M.F.; Meon M.S.; Syawal S.M.; Rahaman W.E.W.A.; Saedon J.B.; Armansyah
出版事項: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
著者:: Seng, 等
出版事項: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
著者:: Seng T.K.; Zakaria M.S.; Nordin R.M.; Halim K.A.A.; Hayazi N.F.; Ibrahim L.H.
出版事項: (2024)

Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system
著者:: Ismail M.H.; Sidambe A.T.; Figueroa I.A.; Davies H.A.; Todd I.
出版事項: (2010)

Multi-objective optimization in wire-electrical discharge machining (WEDM) of titanium alloy
著者:: Saedon J.B.; Jaafar N.; Nor N.H.M.; Yahaya M.A.; Husain H.
出版事項: (2015)

Review on the mechanical properties and biocompatibility of titanium implant: The role of niobium alloying element
著者:: 2-s2.0-85108859543
出版事項: (2021)

Hydroxyapatite Powders from Chicken Bone Waste: Effect of Low and High-Temperature Calcination
著者:: Rahman, 等
出版事項: (2024)

Hydroxyapatite Powders from Chicken Bone Waste: Effect of Low and High-Temperature Calcination
著者:: 2-s2.0-85216296130
出版事項: (2024)

Stagnation Bioconvection Flow of Titanium and Aluminium Alloy Nanofluid Containing Gyrotactic Microorganisms over an Exponentially Vertical Sheet
著者:: 2-s2.0-85167987886
出版事項: (2023)

IMPACT OF TITANIUM NITRIDE MICRO/NANOPARTICLES ON OPTICAL PROPERTIES OF ERBIUM DOPED SODIUM-ZINC-TELLURITE GLASS
著者:: Yusof, 等
出版事項: (2024)

A green approach of superhydrophobic surface fabrication on recycled high-density polyethylene using sodium chloride
著者:: 2-s2.0-85121442102
出版事項: (2021)

Employability, mobility and work-life balance: How do they relate for MBA holders in Malaysia?
著者:: Samuel R.; Ramayah T.
出版事項: (2016)

Analysis on the presence of nanosized titanium dioxide (TiO2) and zinc oxide (ZnO) in compact powder
著者:: Muhamad S.; Rahman R.A.; Samah N.A.; Adnan M.A.M.; Ibrahim S.A.
出版事項: (2022)

Analysis on the presence of nanosized titanium dioxide (TiO2) and zinc oxide (ZnO) in compact powder
著者:: 2-s2.0-85213814589
出版事項: (2022)

New phase of lead chalcogenide alloy: Ternary alloy PbSrSe2 for future thermoelectric application
著者:: 2-s2.0-85129367580
出版事項: (2022)

A metallurgical overview of Ti – based alloy in biomedical applications
著者:: 2-s2.0-84943236764
出版事項: (2015)

The state of starch/hydroxyapatite composite scaffold in bone tissue engineering with consideration for dielectric measurement as an alternative characterization technique
著者:: 2-s2.0-85104725074
出版事項: (2021)

Mechanical Properties of Concrete with Rubber Powder and Clamshell Powder
著者:: Shahidan N.I.I.; Min Y.H.; Mohd Apandi N.; Senin S.F.; Hwa C.C.; Yeol K.J.
出版事項: (2025)

Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen
著者:: Khalid A.H.; Muhamad Said M.F.; Veza I.; Abas M.A.; Roslan M.F.; Abubakar S.; Jalal M.R.
出版事項: (2024)

Recent Progress on Titanium Dioxide-Based Humidity Sensor: Structural Modification, Doping, and Composite Approach
著者:: 2-s2.0-85138007544
出版事項: (2022)

Effect of zinc ions on the structural characteristics of hydroxyapatite bioceramics
著者:: 2-s2.0-85079833741
出版事項: (2020)

Surface Properties and Characterisation of Cobalt-Nickel-Iron Alloy Coating on Mild Steel for Engineering Applications
著者:: Zabri M.Z.; Masdek N.R.N.; Mardziah C.M.; Ahmad N.M.
出版事項: (2024)

Surface Properties and Characterisation of Cobalt-Nickel-Iron Alloy Coating on Mild Steel for Engineering Applications
著者:: 2-s2.0-85214684843
出版事項: (2024)

Utilization of Sodium Hydroxide (Naoh) to Treat Used Tyres as Sand Partial Replacement in Engineered Cementitious Composites
著者:: 2-s2.0-85144801481
出版事項: (2022)

Biosynthesized gold nanoparticles-doped hydroxyapatite as antibacterial and antioxidant nanocomposite
著者:: 2-s2.0-85119356101
出版事項: (2021)

Fault injection test on mitigated benchmark circuits using FPGA
著者:: 2-s2.0-85185816454
出版事項: (2024)

Modification of poly(vinyl chloride) thin films with organic compound and nanoparticles for solar energy applications
著者:: 2-s2.0-85162972838
出版事項: (2023)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
著者:: Rajendran, 等
出版事項: (2024)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
著者:: Rajendran R.C.; Anto T.; Agarwal A.; Ilunga M.; Jayamani E.; Natarajan V.D.
出版事項: (2024)

Characterizations of fish bone-based hydroxyapatite: Effect of different calcination temperatures
著者:: Aziz H.A.; Mardziah C.M.; Natasha A.N.; Alexander C.H.C.
出版事項: (2024)

Application and challenges of big data analytics in low-carbon indoor space design
著者:: Zeng H.; Arif M.F.M.
出版事項: (2025)

Application and challenges of big data analytics in low-carbon indoor space design
著者:: Zeng, 等
出版事項: (2025)

Application and challenges of big data analytics in low-carbon indoor space design
著者:: 2-s2.0-85217788406
出版事項: (2025)

Zinc-substituted hydroxyapatite produced from calcium precursor derived from eggshells
著者:: Mardziah C.M.; Ramesh S.; Tan C.Y.; Chandran H.; Sidhu A.; Krishnasamy S.; Purbolaksono J.
出版事項: (2021)

Fabrication of elastin additive on polymethyl methacrylate and hydroxyapatite-based bioactive bone cement
著者:: Rad M.M.; Saber-Samandari S.; Bokov D.O.; Suksatan W.; Esfahani M.M.; Yusof M.Y.P.M.; El-Shafay A.S.
出版事項: (2022)

Zinc-substituted hydroxyapatite produced from calcium precursor derived from eggshells
著者:: 2-s2.0-85113188809
出版事項: (2021)

Synthesis route towards fine and monodisperse Ni nanoparticles via hot-injection approach
著者:: 2-s2.0-84886256454
出版事項: (2013)

Properties of sintered zinc hydroxyapatite bioceramic prepared using waste chicken eggshells as calcium precursor
著者:: Mardziah C.M.; Ramesh S.; Chandran H.; Sidhu A.; Krishnasamy S.
出版事項: (2023)