Application of sodium chloride as space holder for powder injection molding of alloy Titanium-Hydroxyapatite composites

QR Code

Application of sodium chloride as space holder for powder injection molding of alloy Titanium-Hydroxyapatite composites

The development of porous metal structures, especially for the use of titanium alloys in bone implant applications, has attracted the attention of researchers. However, forming porous structures in titanium composites via powder injection molding (PIM) remains in the early stages of analysis, allowi...

Full description

Bibliographic Details
Published in:	Journal of Materials Research and Technology
Main Author:	2-s2.0-85106916632
Format:	Article
Language:	English
Published:	Elsevier Editora Ltda 2021
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85106916632&doi=10.1016%2fj.jmrt.2021.02.087&partnerID=40&md5=2bec9bc35f0e1e3062e46fbffa9739b9

Similar Items

Mathematical modeling of plastic injection molding parameters to study the product quality through mechanical property evaluation
by: Venkatason K.; Sivaguru S.; Paizar A.R.; Roseley N.R.N.
Published: (2023)

Surface Characterization of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System
by: Saedon, et al.
Published: (2024)

Multi-objective Optimization of Turning Titanium Alloy by Grey Rational Analysis
by: Nor N.H.M.; Ahmad S.; Othman M.F.; Meon M.S.; Syawal S.M.; Rahaman W.E.W.A.; Saedon J.B.; Armansyah
Published: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
by: Seng, et al.
Published: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
by: Seng T.K.; Zakaria M.S.; Nordin R.M.; Halim K.A.A.; Hayazi N.F.; Ibrahim L.H.
Published: (2024)

Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system
by: Ismail M.H.; Sidambe A.T.; Figueroa I.A.; Davies H.A.; Todd I.
Published: (2010)

Multi-objective optimization in wire-electrical discharge machining (WEDM) of titanium alloy
by: Saedon J.B.; Jaafar N.; Nor N.H.M.; Yahaya M.A.; Husain H.
Published: (2015)

Review on the mechanical properties and biocompatibility of titanium implant: The role of niobium alloying element
by: 2-s2.0-85108859543
Published: (2021)

Hydroxyapatite Powders from Chicken Bone Waste: Effect of Low and High-Temperature Calcination
by: Rahman, et al.
Published: (2024)

Hydroxyapatite Powders from Chicken Bone Waste: Effect of Low and High-Temperature Calcination
by: 2-s2.0-85216296130
Published: (2024)

Stagnation Bioconvection Flow of Titanium and Aluminium Alloy Nanofluid Containing Gyrotactic Microorganisms over an Exponentially Vertical Sheet
by: 2-s2.0-85167987886
Published: (2023)

IMPACT OF TITANIUM NITRIDE MICRO/NANOPARTICLES ON OPTICAL PROPERTIES OF ERBIUM DOPED SODIUM-ZINC-TELLURITE GLASS
by: Yusof, et al.
Published: (2024)

A green approach of superhydrophobic surface fabrication on recycled high-density polyethylene using sodium chloride
by: 2-s2.0-85121442102
Published: (2021)

Employability, mobility and work-life balance: How do they relate for MBA holders in Malaysia?
by: Samuel R.; Ramayah T.
Published: (2016)

Analysis on the presence of nanosized titanium dioxide (TiO2) and zinc oxide (ZnO) in compact powder
by: Muhamad S.; Rahman R.A.; Samah N.A.; Adnan M.A.M.; Ibrahim S.A.
Published: (2022)

Analysis on the presence of nanosized titanium dioxide (TiO2) and zinc oxide (ZnO) in compact powder
by: 2-s2.0-85213814589
Published: (2022)

New phase of lead chalcogenide alloy: Ternary alloy PbSrSe2 for future thermoelectric application
by: 2-s2.0-85129367580
Published: (2022)

A metallurgical overview of Ti – based alloy in biomedical applications
by: 2-s2.0-84943236764
Published: (2015)

The state of starch/hydroxyapatite composite scaffold in bone tissue engineering with consideration for dielectric measurement as an alternative characterization technique
by: 2-s2.0-85104725074
Published: (2021)

Mechanical Properties of Concrete with Rubber Powder and Clamshell Powder
by: Shahidan N.I.I.; Min Y.H.; Mohd Apandi N.; Senin S.F.; Hwa C.C.; Yeol K.J.
Published: (2025)

Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen
by: Khalid A.H.; Muhamad Said M.F.; Veza I.; Abas M.A.; Roslan M.F.; Abubakar S.; Jalal M.R.
Published: (2024)

Recent Progress on Titanium Dioxide-Based Humidity Sensor: Structural Modification, Doping, and Composite Approach
by: 2-s2.0-85138007544
Published: (2022)

Effect of zinc ions on the structural characteristics of hydroxyapatite bioceramics
by: 2-s2.0-85079833741
Published: (2020)

Surface Properties and Characterisation of Cobalt-Nickel-Iron Alloy Coating on Mild Steel for Engineering Applications
by: Zabri M.Z.; Masdek N.R.N.; Mardziah C.M.; Ahmad N.M.
Published: (2024)

Surface Properties and Characterisation of Cobalt-Nickel-Iron Alloy Coating on Mild Steel for Engineering Applications
by: 2-s2.0-85214684843
Published: (2024)

Utilization of Sodium Hydroxide (Naoh) to Treat Used Tyres as Sand Partial Replacement in Engineered Cementitious Composites
by: 2-s2.0-85144801481
Published: (2022)

Biosynthesized gold nanoparticles-doped hydroxyapatite as antibacterial and antioxidant nanocomposite
by: 2-s2.0-85119356101
Published: (2021)

Fault injection test on mitigated benchmark circuits using FPGA
by: 2-s2.0-85185816454
Published: (2024)

Modification of poly(vinyl chloride) thin films with organic compound and nanoparticles for solar energy applications
by: 2-s2.0-85162972838
Published: (2023)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
by: Rajendran, et al.
Published: (2024)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
by: Rajendran R.C.; Anto T.; Agarwal A.; Ilunga M.; Jayamani E.; Natarajan V.D.
Published: (2024)

Characterizations of fish bone-based hydroxyapatite: Effect of different calcination temperatures
by: Aziz H.A.; Mardziah C.M.; Natasha A.N.; Alexander C.H.C.
Published: (2024)

Application and challenges of big data analytics in low-carbon indoor space design
by: Zeng H.; Arif M.F.M.
Published: (2025)

Application and challenges of big data analytics in low-carbon indoor space design
by: Zeng, et al.
Published: (2025)

Application and challenges of big data analytics in low-carbon indoor space design
by: 2-s2.0-85217788406
Published: (2025)

Zinc-substituted hydroxyapatite produced from calcium precursor derived from eggshells
by: Mardziah C.M.; Ramesh S.; Tan C.Y.; Chandran H.; Sidhu A.; Krishnasamy S.; Purbolaksono J.
Published: (2021)

Fabrication of elastin additive on polymethyl methacrylate and hydroxyapatite-based bioactive bone cement
by: Rad M.M.; Saber-Samandari S.; Bokov D.O.; Suksatan W.; Esfahani M.M.; Yusof M.Y.P.M.; El-Shafay A.S.
Published: (2022)

Zinc-substituted hydroxyapatite produced from calcium precursor derived from eggshells
by: 2-s2.0-85113188809
Published: (2021)

Synthesis route towards fine and monodisperse Ni nanoparticles via hot-injection approach
by: 2-s2.0-84886256454
Published: (2013)

Properties of sintered zinc hydroxyapatite bioceramic prepared using waste chicken eggshells as calcium precursor
by: Mardziah C.M.; Ramesh S.; Chandran H.; Sidhu A.; Krishnasamy S.
Published: (2023)