Assessment of Mechanical Properties of Recycled HDPE and LDPE Plastic Wastes

QR Code

Assessment of Mechanical Properties of Recycled HDPE and LDPE Plastic Wastes

Most plastic materials can be recycled, and turning them into some useful products can be one of the options in reducing environmental pollutions. In this project, High Density Polyethylene (HDPE) and Low Density Polyethylene (LDPE) were used, shredded into smaller pieces and were hot-pressed to bec...

書目詳細資料
發表在:	IOP Conference Series: Materials Science and Engineering
主要作者:	2-s2.0-85097602008
格式:	Conference paper
語言:	English
出版:	IOP Publishing Ltd 2020
在線閱讀:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85097602008&doi=10.1088%2f1757-899X%2f957%2f1%2f012046&partnerID=40&md5=50051fa65bc69cadba20a1881f76972a

相似書籍

Tensile properties of liner fabricated from the recycled food packaging plastic waste
由: 2-s2.0-85078623523
出版: (2019)

Characterization of Pyrolytic Oil from Different Blending Ratio of HDPE and PET Plastic Waste Through Gasification Pyrolysis Process
由: 2-s2.0-85213358003
出版: (2024)

Recent advances in recycling and upcycling of hazardous plastic waste: A review
由: 2-s2.0-86000457965
出版: (2025)

Characterization of Pyrolytic Oil from Different Blending Ratio of HDPE and PET Plastic Waste Through Gasification Pyrolysis Process
由: Masakhoh S.H.; Januri Z.; Rahman N.A.
出版: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
由: Seng, et al.
出版: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
由: Seng T.K.; Zakaria M.S.; Nordin R.M.; Halim K.A.A.; Hayazi N.F.; Ibrahim L.H.
出版: (2024)

Plastic waste-to-fuel and sustainable development goals
由: 2-s2.0-85205363350
出版: (2024)

Co-pyrolysis of biomass and waste plastics for production of chemicals and liquid fuel: A review on the role of plastics and catalyst types
由: 2-s2.0-85141923496
出版: (2023)

Nanomaterials in recycled aggregates concrete applications: mechanical properties and durability. A review
由: 2-s2.0-85138256849
出版: (2022)

Mathematical modeling of plastic injection molding parameters to study the product quality through mechanical property evaluation
由: Venkatason K.; Sivaguru S.; Paizar A.R.; Roseley N.R.N.
出版: (2023)

Environmental perspectives of textile waste, environmental pollution and recycling
由: 2-s2.0-85128311675
出版: (2022)

Bibliometric analysis and an overview of the application of the non-precious materials for pyrolysis reaction of plastic waste
由: 2-s2.0-85149291632
出版: (2023)

A short review: Potential use of plastic waste as adsorbent for various pollutants
由: Abd-Aziz N.H.; Alias S.; Bashar N.A.M.; Amir A.; Abdul-Talib S.; Tay C.C.
出版: (2019)

Current recycling strategies and high-value utilization of waste cotton
由: 2-s2.0-85139345641
出版: (2023)

Particleboard from agricultural biomass and recycled wood waste: a review
由: 2-s2.0-85140798083
出版: (2022)

Attitude and expectation: Food waste recycling as a business opportunity in Terengganu
由: Wan Nawawi W.N.; Khalid S.A.; Ramli N.; Daud N.M.
出版: (2017)

Deep Learning Model for Enhancing Automated Recycling Machine with Incentive Mechanisms
由: 2-s2.0-85202952430
出版: (2024)

A multi-period model for reorganising urban household waste recycling networks
由: Zaharudin Z.A.; Brint A.; Genovese A.
出版: (2022)

Recent progress on catalytic co-pyrolysis of plastic waste and lignocellulosic biomass to liquid fuel: The influence of technical and reaction kinetic parameters
由: 2-s2.0-85100680046
出版: (2021)

Food waste reduction strategies in composting and recycling centers based on material flow analysis
由: Zahra, et al.
出版: (2024)

Flexural and Thermo-Mechanical Properties Assessment of Nano-Silica BFRPC and GFRPC
由: Muslim M.A.; Jumahat A.; Abdullah S.A.; Kamaruzzaman F.; Haris N.A.; Jaafar M.A.; Loy R.S.T.
出版: (2024)

Plastic pollution and degradation pathways: A review on the treatment technologies
由: 2-s2.0-85189521739
出版: (2024)

Assessing Fnvironmental Pollution and Noise Levels at End-of-Life Vehicle Recycling Centers: A Comparative Study
由: Harun, et al.
出版: (2024)

Mechanical properties of rubber vulcanizates containing Ethylene Propylene Diene Rubber waste at different types of vulcanization system
由: 2-s2.0-85130321256
出版: (2022)

Enhancement of bio-plastic using eggshells and chitosan on potato starch based
由: 2-s2.0-85082361559
出版: (2018)

Municipal Solid Waste Recycling Behavior and Its Association with Socio-demographics at Low-cost Apartments in Klang, Selangor, Malaysia
由: Azmin M.T.; Yatim S.R.M.; Ishak A.R.; Zaki M.A.; Samah M.A.A.; Rasdi N.W.
出版: (2022)

Tensile and flexural investigation on polypropylene recycling
由: 2-s2.0-85064384614
出版: (2019)

Mechanical properties of rubber vulcanizates containing Ethylene Propylene Diene Rubber waste at different types of vulcanization system
由: Abdul Wahab N.M.; Ahmad Khairal Anuar F.N.; Jamal S.N.; Mustafa M.S.; Samsudin D.; Syed Ismail S.N.
出版: (2022)

Determining key issues in life-cycle assessment of waste biorefineries
由: 2-s2.0-85127569491
出版: (2020)

Food Waste and Carbon Footprint Assessment of Eateries in Kelantan, Malaysia
由: 2-s2.0-85142042549
出版: (2022)

Antimicrobial potential of plastic films incorporated with sage extract on chicken meat
由: Aziman N.; Jawaid M.; Mutalib N.A.A.; Yusof N.L.; Nadrah A.H.; Nazatul U.K.; Tverezovskiy V.V.; Tverezovskaya O.A.; Fouad H.; Braganca R.M.; Baker P.W.; Selbie S.; Ali A.
出版: (2021)

Model-free kinetic analysis for co-pyrolysis of mixed plastic polymers with oil palm fiber
由: 2-s2.0-85176959484
出版: (2023)

Synthesis of graphene oxide-coated silver nanoparticles modified plastic of fibre optic sensor configuration
由: 2-s2.0-85218141222
出版: (2022)

Mechanical Properties of Compression Garments
由: 2-s2.0-85163464620
出版: (2023)

Enhancing the combustion characteristics of plastic pyrolytic oils by doping nanocarbon additives for alternative energy
由: Marlina, et al.
出版: (2025)

Synergistic Effect Between Empty Fruit Bunch and HDPE on Products Yield and Functional Group Content in Bio-fuels Produced from Co-liquefaction Process Under Supercritical Methanol Condition
由: Ani A.Y.; Ali S.N.; Ibrahim N.R.; Ahmad R.; Ismail K.; Mohd Ishak M.A.
出版: (2024)

COMPARISON BETWEEN JOHNSON COOK’S PLASTICITY WITH DAMAGE MODEL AND ISOTROPIC HARDENING PLASTICITY WITH DUCTILE DAMAGE MODEL ON ALUMINIUM ALLOY SHEET 2024 T3 TENSILE TEST IN CORRELATING THE FINITE ELEMENT METHOD (FEM) TO THE EXPERIMENT TEST RESULT
由: Gunsalam H.; Abdullah A.S.; Awi M.; Aziz M.R.; Kamarudin K.-A.
出版: (2023)

Microclear: Green technology for treating and recycling of coloured wastewater
由: Ibrahim Z.; Yahya A.; Aris A.; Hakim I.; Taib M.A.; Mohamed Najib M.A.; Abdul Hamid A.B.; Umor N.A.; Said S.M.; Daud Z.; Salleh M.M.; Shahir S.; Mohamad S.E.; Kuang A.S.; Hong N.C.
出版: (2015)

Assessing respiratory mechanics using pressure reconstruction method in mechanically ventilated spontaneous breathing patient
由: Damanhuri N.S.; Chiew Y.S.; Othman N.A.; Docherty P.D.; Pretty C.G.; Shaw G.M.; Desaive T.; Chase J.G.
出版: (2016)

Penile strangulation as a consequence of autoerection with polyvinyl chloride plastic pipe ring: A case report and method of treatment
由: 2-s2.0-85052961507
出版: (2018)