Single-phase single-stage ZCS boost PFC rectifier with reduced switch count

In this paper, a new single-phase single-stage ZCS PFC boost rectifier with reduced switch count is introduced. The efficiency of the proposed converter is improved by eliminating input stage diode-bridge. Moreover, only two active switches are used to permit bi-directional current flow from high-vo...

全面介紹

書目詳細資料
發表在:2014 Australasian Universities Power Engineering Conference, AUPEC 2014 - Proceedings
主要作者: 2-s2.0-84929429127
格式: Conference paper
語言:English
出版: Institute of Electrical and Electronics Engineers Inc. 2014
在線閱讀:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84929429127&doi=10.1109%2fAUPEC.2014.6966512&partnerID=40&md5=32ff878723fc2c11eb08132b72d1852d
實物特徵
總結:In this paper, a new single-phase single-stage ZCS PFC boost rectifier with reduced switch count is introduced. The efficiency of the proposed converter is improved by eliminating input stage diode-bridge. Moreover, only two active switches are used to permit bi-directional current flow from high-voltage-rail to low-voltage-rail and vice versa. Hence, no auxiliary switch is needed. A resonant inductor and a capacitor are used to make both switches operate at ZCS turn-off and soft turn-on. The proposed converter is developed by using totem-pole bridgeless boost (TPBLB) converter. Standard components are used to prove that the proposed converter is working with acceptable performance compared to other bridgeless boost converters with soft-switching. In addition, a PWM controller is proposed, which combines a conventional average-current-mode power factor correction (PFC) controller, several logic-gates and a phase detector. A detailed analysis of the converter operation and control is supported by simulation results. Finally, a 400 W, 50 kHz experimental prototype is built to verify the theoretical analysis and performance of the proposed converter. © 2014 ACPE.
ISSN:
DOI:10.1109/AUPEC.2014.6966512