Effect of dynamic load on the temperature profiles and cooling response time of a proton exchange membrane fuel cell

QR Code

Effect of dynamic load on the temperature profiles and cooling response time of a proton exchange membrane fuel cell

Polymer Electrolyte Membrane Fuel Cells (PEMFC) is an electrochemical device that generates electrical energy from the reactions between hydrogen and oxygen. An effective thermal management is needed to preserve the fuel cell performance and durability. Cooling by water is a conventional approach fo...

Full description

Bibliographic Details
Published in:	Journal of the Energy Institute
Main Author:	2-s2.0-85014392777
Format:	Article
Language:	English
Published:	Elsevier B.V. 2018
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85014392777&doi=10.1016%2fj.joei.2017.02.006&partnerID=40&md5=8a24effe7e9781caf0c28717e424a7e4

Similar Items

Multi-aspect optimization of a geothermal-based integrated Kalina-proton exchange membrane fuel cell with ejector cooling and desalination systems
by: 2-s2.0-85161310555
Published: (2023)

Thermophysical Properties of Silicon Dioxide (SiO2) in Ethylene Glycol/Water Mixture for Proton Exchange Membrane Fuel Cell Cooling Application
by: 2-s2.0-84970966387
Published: (2015)

Experimental Investigation of Thermal Conductivity and Electrical Conductivity of Al2O3 Nanofluid in Water - Ethylene Glycol Mixture for Proton Exchange Membrane Fuel Cell Application
by: 2-s2.0-84920452064
Published: (2015)

RETRACTION: Neural network-based optimization of hydrogen fuel production energy system with proton exchange electrolyzer supported nanomaterial
by: Hai, et al.
Published: (2025)

Enhancing protonic ceramic fuel cell performance through nanomilling of BCZY electrolyte powder
by: 2-s2.0-85166083663
Published: (2023)

Computational fluid dynamics study of Y3+-doped Ba(Ce,Zr)O3 based single channel proton ceramic fuel cell
by: Malik L.A.; Missnan M.I.; Hassan O.H.; Jani A.M.M.; Rahman H.A.; Luengchavanon M.; Osman N.
Published: (2023)

Experimental analysis of SiO2-Distilled water nanofluids in a Polymer Electrolyte Membrane fuel cell parallel channel cooling plate
by: 2-s2.0-85071102736
Published: (2019)

Retraction notice to “Neural network-based optimization of hydrogen fuel production energy system with proton exchange electrolyzer supported nanomaterial” [Fuel 332 (2023) 125827] (Fuel (2023) 332(P1), (S0016236122026540), (10.1016/j.fuel.2022.125827))
by: 2-s2.0-86000436771
Published: (2025)

Effect of High-cyclic Loads on Dynamic Response of Reinforced Concrete Slabs
by: Jamadin A.; Ibrahim Z.; Jumaat M.Z.; Wahab E.S.A.
Published: (2019)

In vitro and in vivo evaluation of pectin/copper exchanged faujasite composite membranes
by: Ninan N.; Muthiah M.; Park I.-K.; Elain A.; Wong T.W.; Thomas S.; Grohens Y.
Published: (2015)

Load Profile Forecasting using a Time Series Model for Solar Rooftop and Integrated Carpark of a Public University in Malaysia
by: 2-s2.0-85182813810
Published: (2023)

A review of nanofluid adoption in polymer electrolyte membrane (PEM) fuel cells as an alternative coolant
by: 2-s2.0-84938577514
Published: (2015)

Exploring the role and potential of epoxidized natural rubber in enhancing polymer electrolyte membranes for fuel cells: an overview
by: 2-s2.0-85211508337
Published: (2025)

Development of low-cost nafion-lignin composite conductive membranes for application in direct methanol fuel cells
by: 2-s2.0-85181766572
Published: (2024)

Thermal analysis of Al2O3-water ethylene glycol mixture nanofluid for single PEM fuel cell cooling plate: An experimental study
by: 2-s2.0-84959431640
Published: (2016)

Experimental Investigation of Al2O3 - Water Ethylene Glycol Mixture Nanofluid Thermal Behaviour in a Single Cooling Plate for PEM Fuel Cell Application
by: 2-s2.0-84971003266
Published: (2015)

Methanol permeability enhancement through heat treatment of Nafion-based composite membrane for direct methanol fuel cell application
by: 2-s2.0-85195375811
Published: (2024)

Physical characterization of LSCF-NiO as cathode material for intermediate temperature solid oxide fuel cell (IT-SOFCs)
by: 2-s2.0-85112493987
Published: (2020)

Antibacterial Performance of Protonated Polyaniline-Integrated Polyester Fabrics
by: Aizamddin M.F.; Mahat M.M.; Ariffin Z.Z.; Nawawi M.A.; Jani N.A.; Amdan N.A.N.; Sadasivuni K.K.
Published: (2022)

Metabolites profile of colorectal cancer cells at different stages
by: Yusof H.M.; Ab-Rahim S.; Ngah W.Z.W.; Nathan S.; Jamal A R.A.; Mazlan M.
Published: (2019)

Simulation of Flow Profile Response to Alternate Bar Formation in Rivers
by: 2-s2.0-85077547144
Published: (2020)

Experimental and theoretical study of thermoelectric generator waste heat recovery model for an ultra-low temperature PEM fuel cell powered vehicle
by: 2-s2.0-85065624449
Published: (2019)

Effect of temperature towards electrical conductivities of low concentration of AL2O3 nanofluid in electrically active cooling system
by: 2-s2.0-84938659054
Published: (2014)

Investigating Satisfaction and Loyalty of the House-Owner and the Tenant From Dual Perspectives Using Social Exchange Theory and Stimulus-Organism-Response Approach
by: Uzir, et al.
Published: (2025)

Investigating Satisfaction and Loyalty of the House-Owner and the Tenant From Dual Perspectives Using Social Exchange Theory and Stimulus-Organism-Response Approach
by: 2-s2.0-85219527338
Published: (2025)

The Architecture of BaTiO3 Nanoparticles Synthesis via Temperature-Responsive for Improved Oil Recovery: A Molecular Dynamics Simulation and Core-Flooding Experimental Study
by: Sikiru S.; Soleimani H.; Rostami A.; Khodapanah L.
Published: (2025)

The Architecture of BaTiO3 Nanoparticles Synthesis via Temperature-Responsive for Improved Oil Recovery: A Molecular Dynamics Simulation and Core-Flooding Experimental Study
by: Sikiru, et al.
Published: (2025)

The Existence of Riba in The Products of Cryptocurrency Exchange Companies
by: 2-s2.0-85203066514
Published: (2024)

Challenges in using perovskite-based anode materials for solid oxide fuel cells with various fuels: a review
by: 2-s2.0-85150254996
Published: (2023)

A Review on Mechanical Properties and Response of Fibre Metal Laminate under Impact Loading (Experiment)
by: 2-s2.0-85161841424
Published: (2023)

The Influence of Cowper-Symonds Coefficients on the Response of Stiffened Steel Plates Subjected to Close-In Blast Loads
by: 2-s2.0-85127264605
Published: (2022)

Design and optimization of powertrain system for prototype fuel cell electric vehicle
by: 2-s2.0-84938599073
Published: (2015)

Technical design and economic evaluation of a PEM fuel cell system
by: 2-s2.0-33744521767
Published: (2006)

A Review of Experimentation of Synthetic Jet Cooling
by: 2-s2.0-85176291826
Published: (2023)

Effect of growth times on the physical and mechanical properties of hydrophobic and oleophilic silylated bacterial cellulose membranes
by: 2-s2.0-85030690742
Published: (2017)

Fabrication of high performance pvdf hollow fiber membrane using less toxic solvent at different additive loading and air gap
by: 2-s2.0-85118483274
Published: (2021)

Effects of palm oil fuel ash (POFA) towards consistency and setting time properties of concrete
by: Imran N.F.; Hasri M.N.; Fitri N.A.K.; Hasan D.; Ramli M.Z.
Published: (2018)

Safety of Proton Pump Inhibitors Based on a Large, Multi-Year, Randomized Trial of Patients Receiving Rivaroxaban or Aspirin
by: 2-s2.0-85070685740
Published: (2019)

Cold chain time-and temperature-controlled transport of vaccines: A simulated experimental study
by: Ng C.Z.; Lean Y.L.; Yeoh S.F.; Lean Q.Y.; Lee K.S.; Suleiman A.K.; Liew K.B.; Kassab Y.W.; Al-Worafi Y.M.; Ming L.C.
Published: (2020)

Cold chain time-and temperature-controlled transport of vaccines: A simulated experimental study
by: 2-s2.0-85080142982
Published: (2020)