Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method

QR Code

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method

Today, 3D printing equipment is reasonably priced and widely available. This allows for the design creation of more complex structures for aerospace applications, especially for the unmanned aerial vehicle (UAV). In this study, a simulated 3D-printed airframe has been evaluated for use with a blende...

Full description

Bibliographic Details
Published in:	Journal of Aeronautics, Astronautics and Aviation
Main Author:	2-s2.0-85132112562
Format:	Article
Language:	English
Published:	The Aeronautical and Astronautical Society of the Republic of China 2022
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85132112562&doi=10.6125%2fJoAAA.202209_54%283%29.10&partnerID=40&md5=07a7f87cab17385d83f9b4af7412f912

Similar Items

Finite element-based fatigue life prediction of a load-carrying cruciform joint
by: 2-s2.0-84938634562
Published: (2015)

A Study of 3D Printed Box Structure
by: 2-s2.0-85104174597
Published: (2021)

Biomechanical Evaluation of Three-Dimensional Printed Leg Orthosis for Ankle Fixation: Finite Element and Thermal Analysis
by: Mohd Salaha Z.F.; Jauhari Efendie S.N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
Published: (2024)

Determining hyperelastic parameters of human skin using 2D finite element modelling and simulation
by: 2-s2.0-84867919926
Published: (2012)

TOPOLOGY OPTIMIZATION AND MECHANICAL PROPERTIES STUDIES ON TOTAL KNEE REPLACEMENT (TKR) USING FINITE ELEMENT SIMULATION METHOD
by: Manap M.F.A.; Zainuddin P.N.B.; Ismail N.F.; Zubair A.F.; Halidi S.N.A.; Ismail H.
Published: (2023)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
by: ATAN M.K.F.M.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; GUNAWAN T.S.; ZAIN Z.M.
Published: (2025)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
by: Atan, et al.
Published: (2025)

Finite element model updating on structural components of simplified model of aircraft pylon
by: Bahari A.R.; Yunus M.A.; Rani M.N.A.; Shah M.A.S.A.; Mirza W.I.I.W.I.
Published: (2022)

Crash Investigation on Frontal Vehicle Chassis Frame using Finite Element Simulation
by: 2-s2.0-85141464799
Published: (2022)

AI 2D-3D Generation in Architectural Design: A Divine Hand or a Pandora's Box
by: 2-s2.0-85219511098
Published: (2024)

Comparison between static and dynamic laboratory compaction methods
by: 2-s2.0-79251553452
Published: (2010)

A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant
by: Al-Tam B.Y.; Ramlee M.H.; Wahab A.A.; Seng G.H.; Abdullah A.H.
Published: (2023)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
by: Hanipah S.H.; C. Hassan N.F.N.; Talib A.T.; P Mohammed M.A.; Wakisaka M.; Abdullah Z.
Published: (2025)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
by: Hanipah, et al.
Published: (2025)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
by: 2-s2.0-85189024462
Published: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
by: Shahar, et al.
Published: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
by: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
Published: (2025)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
by: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
Published: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
by: 2-s2.0-85215705046
Published: (2025)

Ergonomics intervention in assembling air handler panels
by: 2-s2.0-84886303994
Published: (2013)

Contact stiffness parameters of soil particles model for discrete element modeling using static packing pressure test
by: 2-s2.0-85055467752
Published: (2018)

Natural Frequencies Prediction of Hybrid Composite Laminate based on Finite Element Simulation and Artificial Neural Network
by: 2-s2.0-85219506859
Published: (2024)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
by: 2-s2.0-85170094598
Published: (2023)

A review on behavior, material properties and finite element simulation of concrete tunnel linings under fire
by: 2-s2.0-85129768015
Published: (2022)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
by: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
Published: (2022)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
by: 2-s2.0-85122086227
Published: (2022)

Dry thermotropic glycolipid self-assembly: A review
by: 2-s2.0-85048027256
Published: (2018)

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study
by: 2-s2.0-85148865825
Published: (2023)

Development of Ophthalmology Eye Examination Device using 3D Printing Technology
by: Abdullah A.H.; Alimarizan F.; Aziz N.A.A.; Hazwani F.; Marwan S.H.
Published: (2024)

THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS
by: Maideen N.C.; Nazri M.H.; Budin S.; Hyie K.M.; Yusoff H.; Sahudin S.
Published: (2023)

Development and future prospects of 3D printed surimi products: A review
by: Diao D.; Yang R.; Liu Y.; Zhao Y.; Chen M.; Chen Y.; Zheng B.; Khong H.Y.
Published: (2025)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
by: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
Published: (2023)

Development and future prospects of 3D printed surimi products: A review
by: Diao, et al.
Published: (2025)

Plant oil body as an effective improver for surimi-based 3D printing
by: 2-s2.0-85204039180
Published: (2024)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
by: 2-s2.0-85166774849
Published: (2023)

Stochastic study on dynamic behaviour of bolted joint structure
by: Shah M.A.S.A.; Yunus M.A.; Rani M.N.A.; Yahya Z.
Published: (2022)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
by: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
Published: (2024)

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure
by: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Nazeri M.N.; Shuib S.
Published: (2024)

Optimization of Spot Weld Joining Parameters for Dissimilar Plate Materials through Finite Element Model Updating and Response Surface Methodology
by: 2-s2.0-85213279061
Published: (2024)

Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model
by: 2-s2.0-85159289861
Published: (2023)