FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES

QR Code

FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES

Welding with filler material can be considered as an additive manufacturing process whereby it involves the deposition of molten metal in a form of droplets onto a substrate. Wire and Arc Additive Manufacturing (WAAM) and laser direct metal deposition (DMD) are applied for repair purposes, hard faci...

Full description

Bibliographic Details
Published in:	Journal of Advanced Manufacturing Technology
Main Author:	2-s2.0-85149545468
Format:	Article
Language:	English
Published:	Penerbit Universiti Teknikal Malaysia Melaka 2022
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85149545468&partnerID=40&md5=379e0f3ba2ecaf43cf2cbc17070251a0

Similar Items

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
by: 2-s2.0-85189668193
Published: (2024)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
by: Mohd Mansor M.S.; Raja S.; Yusof F.; Muhamad M.R.; Manurung Y.H.; Adenan M.S.; Hussein N.I.S.; Ren J.
Published: (2024)

Research challenges, quality control and monitoring strategy for Wire Arc Additive Manufacturing
by: 2-s2.0-85151789154
Published: (2023)

Effect of Copper Addition on the Properties of TiO2 Coatings Deposited by Air Plasma Spray Process
by: Rahim T.A.; Amir N.I.A.B.; Mohamad N.; Dom A.H.M.; Omar N.I.; Yusuf Y.; Bakar I.A.A.; Juoi J.M.
Published: (2023)

The effect of Gas Metal Arc Welding (GMAW) processes on different welding parameters
by: 2-s2.0-84901055998
Published: (2012)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
by: 2-s2.0-85215661119
Published: (2025)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
by: 2-s2.0-85166774849
Published: (2023)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
by: Rahman A.R.A.; Muhammad N.A.; Mat M.F.; Manurung Y.H.P.; Adenan M.S.; Busari Y.O.; Prajadhiana K.P.; Ginta T.L.; Triyono
Published: (2025)

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition
by: 2-s2.0-85202815409
Published: (2024)

Activated electric arc furnace slag as an efficient and reusable heterogeneous Fenton-like catalyst for the degradation of Reactive Black 5
by: 2-s2.0-84994513762
Published: (2016)

Multi-objective optimization in wire-electrical discharge machining (WEDM) of titanium alloy
by: Saedon J.B.; Jaafar N.; Nor N.H.M.; Yahaya M.A.; Husain H.
Published: (2015)

Design of Multiwavelength EDF-Raman Lasers Utilizing Mach-Zehnder Interferometer
by: 2-s2.0-85125597580
Published: (2021)

Study on depth penetration of molars teeth using carbon dioxide laser
by: 2-s2.0-84855894846
Published: (2011)

Ergonomics as a lean manufacturing tool for improvements in a manufacturing company
by: 2-s2.0-85018440148
Published: (2016)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
by: 2-s2.0-85213080147
Published: (2023)

Indoor flow datasets of two-layered cross-ventilation models by particle image velocimetry and hot wire anemometry
by: 2-s2.0-85178589629
Published: (2024)

Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C
by: 2-s2.0-84943270190
Published: (2015)

The effect of deposition time on the morphology of CuS electrodes fabricated by chemical bath deposition for supercapacitor applications
by: Abdullah H.; Sundararaj M.; Selvanathan V.; Naim N.M.; Akhtaruzzaman M.; Othman M.H.D.; Yap W.F.; Mohmad A.R.; Azman N.J.; Ahmad M.F.; Sampe J.; Yuliarto B.
Published: (2024)

Deposition of fine iron oxide particles in tap water using electrophoretic deposition (EPD) technique
by: Mohd Sharif S.; Abu Bakar N.F.; Naim M.
Published: (2015)

Board diversity and firm value: A study on Malaysian listed firms in manufacturing and non-manufacturing sectors
by: 2-s2.0-85169686474
Published: (2023)

Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications
by: 2-s2.0-84863725211
Published: (2012)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
by: Isnin N.S.; Nasir S.M.F.S.A.; Hemdi A.R.; Ismail H.; Yusoff H.; Nurmalasari R.
Published: (2023)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
by: HISHAM B.N.B.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; ZA'BAH N.F.; TUNG L.H.; ZAIN Z.M.
Published: (2025)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
by: Hisham, et al.
Published: (2025)

Surface morphology study on effect of deposition temperature on nanostructured zinc oxide by chemical vapour deposition method
by: Khusaimi Z.; Ghani N.A.; Noor F.W.M.; Amizam S.; Rafaie H.A.; Mamat M.H.; Sahdan M.Z.; Abdullah N.; Abdullah S.; Rusop M.
Published: (2009)

Structural, optical and electrical properties of ZnO/Zn 2 GeO 4 porous-like thin film and wires
by: 2-s2.0-79951682791
Published: (2011)

High-temperature mechanical properties investigation of Al-6.5 % Cu gas tungsten arc welds made with scandium modified 2319 filler
by: Babu N.K.; Talari M.K.; Pan D.; Wei J.
Published: (2013)

Ultrafast laser plasma doping of Er3+ in Si3N4-on-silicon
by: Kamil S.A.; Chandrappan J.; Krauss T.F.; Jose G.
Published: (2019)

Mode-locked erbium-doped fiber laser based on Cr2GaC saturable absorber
by: 2-s2.0-85195815563
Published: (2024)

Blue laser imaging, blue light imaging, and linked color imaging for the detection and characterization of colorectal tumors
by: 2-s2.0-85063370300
Published: (2019)

Anodized TiO2 nanotubes using Ti wire in fluorinated ethylene glycol with air bubbles for removal of methylene blue dye
by: 2-s2.0-85119297495
Published: (2022)

A review of key principles in halal manufacturing
by: 2-s2.0-85008191023
Published: (2016)

Modal parameters of a laser spot welded structure using wave-based substructuring scheme
by: Basri A.B.A.; Febrina R.; Afriani L.; Rani M.N.A.; Yunus M.A.; Mirza W.I.I.W.I.; Shah M.A.S.A.
Published: (2022)

ELUCIDATING THE EFFECTS OF NEODYMIUM NANOPARTICLES ON JUDD-OFELT AND OPTICAL PARAMETERS OF ZINCTELLURITE GLASS FOR FIBER LASERS
by: Azlan, et al.
Published: (2024)

Influence of machine feed rate in WEDM of Titanium Ti-6Al-4V with constant current (6A) using brass wire
by: 2-s2.0-84901048392
Published: (2012)

Microstructure evolution and mechanical properties investigation of Al-6 %Cu alloy laser and GTA welds; [Untersuchung der Mikrostrukturentwicklung und der mechanischen Eigenschaften von Laser- und WIG-Schweißnähten einer Al-6%Cu-Legierung]
by: Talari M.K.; Kishore Babu N.
Published: (2013)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
by: 2-s2.0-84971469649
Published: (2016)

Lean Manufacturing and Industry 4.0: Unveiling Trends, Applications, and Global Impacts in Manufacturing Through Comprehensive Literature Review
by: Azian, et al.
Published: (2025)

Characteristics of ultrafine particle sources and deposition rates in primary school classrooms
by: 2-s2.0-84900803036
Published: (2014)

Design of an enhanced feature point matching algorithm utilizing 3D laser scanning technology for sculpture design
by: Zheng X.; Weng Z.
Published: (2025)