Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C

QR Code

Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C

The purpose of this project is to study the encouragement of three machining parameters on wire electrical discharge machining that consist of peak current (IP), pulse OFF time (OFF) and wire tension (WT) to three machining responses which are cutting rate (CR), material removal rate (MRR) and surfa...

书目详细资料
发表在:	Jurnal Teknologi
主要作者:	2-s2.0-84943270190
格式:	文件
语言:	English
出版:	Penerbit UTM Press 2015
在线阅读:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84943270190&doi=10.11113%2fjt.v76.5701&partnerID=40&md5=55f5c149a81e271afaa0b88b6531f3f0

相似书籍

Multi-objective optimization in wire-electrical discharge machining (WEDM) of titanium alloy
由: Saedon J.B.; Jaafar N.; Nor N.H.M.; Yahaya M.A.; Husain H.
出版: (2015)

Influence of machine feed rate in WEDM of Titanium Ti-6Al-4V with constant current (6A) using brass wire
由: 2-s2.0-84901048392
出版: (2012)

A review on current research trends in electrical discharge machining (EDM)
由: 2-s2.0-33947193401
出版: (2007)

Investigation of Tensile Test on Back-to-Back Web Connection of Cold-Formed Steel C-Section
由: Muhammad Alif I.R.; Kamarudin A.F.; Seyed Hakim S.J.; Musa M.K.; Hamid S.; Mohammadhasani M.; Rathomy Romeli M.A.
出版: (2024)

Investigation of Tensile Test on Back-to-Back Web Connection of Cold-Formed Steel C-Section
由: 2-s2.0-85200314989
出版: (2024)

Investigation of failure analysis on fatigue crack initiation influenced by critical resolved shear stress in X10CrMoVNb9-1 steel
由: Abd Rahim, et al.
出版: (2024)

Mode-locked erbium-doped fiber laser based on Cr2GaC saturable absorber
由: 2-s2.0-85195815563
出版: (2024)

Structural, optical and electrical properties of ZnO/Zn 2 GeO 4 porous-like thin film and wires
由: 2-s2.0-79951682791
出版: (2011)

Experimental Analysis of Cold-Formed Steel C-Sections with the Notch Subjected to Axial Compression
由: Sani M.S.H.M.; Muftah F.; Tan C.S.
出版: (2020)

FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES
由: 2-s2.0-85149545468
出版: (2022)

Effect of Cr3+ substitution at Mn-site on electrical and magnetic properties of charge ordered Bi0.3Pr0.3Ca0.4MnO3 manganites
由: 2-s2.0-85047261330
出版: (2018)

Investigating the Effect of Electric Vehicle (EV) in the Protection Distribution System
由: 2-s2.0-85219539997
出版: (2024)

Investigating and Modeling Ageing Effects on Polymeric Insulator Electrical Properties
由: 2-s2.0-85165909376
出版: (2023)

Microstructure and microhardness properties of Fe-Cr-Al2O 3 composites
由: 2-s2.0-78049499296
出版: (2010)

Research challenges, quality control and monitoring strategy for Wire Arc Additive Manufacturing
由: 2-s2.0-85151789154
出版: (2023)

Performance evaluation of high discharge estuarine hydrodynamic model
由: Salleh, et al.
出版: (2025)

Performance evaluation of high discharge estuarine hydrodynamic model
由: 2-s2.0-85219135938
出版: (2025)

Partial Discharges Identification and Localisation within Transformer Windings
由: 2-s2.0-85097998275
出版: (2020)

Numerical Investigation of the Failure of Stiffened Steel Plates Subjected to Near-Field Blast Loads
由: Razak N.S.A.; Alias A.; Mohsan N.M.; Masjuki S.A.
出版: (2023)

Reinforced concrete slab with added steel fibers for engineering application: Preliminary experimental investigations
由: 2-s2.0-85115439629
出版: (2021)

Simulation and experiment of 50% calcium oxide-sand mixture in a bubbling fluidized bed CO2 absorption reactor
由: 2-s2.0-84956989213
出版: (2014)

New phase of lead chalcogenide alloy: Ternary alloy PbSrSe2 for future thermoelectric application
由: 2-s2.0-85129367580
出版: (2022)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
由: 2-s2.0-84971469649
出版: (2016)

Stand structure, biomass estimation and population dynamics of Rhizophoraceae in 50-ha plot at Pasoh Forest Reserve, Negeri Sembilan, Malaysia
由: Fitri A.Z.; Hafiz M.M.A.; Hazlan N.N.H.; Norafida N.N.A.; Norilani W.W.I.; Latiff A.
出版: (2023)

Stand structure, biomass estimation and population dynamics of Rhizophoraceae in 50-ha plot at Pasoh Forest Reserve, Negeri Sembilan, Malaysia
由: 2-s2.0-85215869558
出版: (2023)

XPS and DFT investigations of corrosion inhibition of substituted benzylidene Schiff bases on mild steel in hydrochloric acid
由: 2-s2.0-85060555005
出版: (2019)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
由: Mohd Mansor M.S.; Raja S.; Yusof F.; Muhamad M.R.; Manurung Y.H.; Adenan M.S.; Hussein N.I.S.; Ren J.
出版: (2024)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
由: 2-s2.0-85189668193
出版: (2024)

Indoor flow datasets of two-layered cross-ventilation models by particle image velocimetry and hot wire anemometry
由: 2-s2.0-85178589629
出版: (2024)

Anodic oxidation of Zr-5Fe alloy in ethylene glycol/fluoride electrolyte for Cr(VI) removal under sunlight
由: Jelaini F.J.; Bashirom N.; Fauzi N.H.N.C.; Isa N.
出版: (2024)

Impact of microstructure morphology on fatigue crack initiation in 9Cr-1Mo (P91) through numerical simulation
由: 2-s2.0-85195538700
出版: (2024)

Backwater Effect of Tidal Water Level Fluctuation and Riverine Discharge in An Idealized River
由: 2-s2.0-85086903427
出版: (2020)

Missing River Discharge Data Imputation Approach using Artificial Neural Network
由: 2-s2.0-85101170010
出版: (2015)

CL-SR: Boosting Imbalanced Image Classification with Contrastive Learning and Synthetic Minority Oversampling Technique Based on Rough Set Theory Integration
由: Gao X.; Jamil N.; Ramli M.I.
出版: (2024)

Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications
由: 2-s2.0-84863725211
出版: (2012)

Synthesis and single-molecule imaging reveal stereospecific enhancement of binding kinetics by the antitumour eEF1A antagonist SR-A3
由: 2-s2.0-85138252320
出版: (2022)

Structural, electronic and optical studies of Sr2NiTeO6 double perovskite by first-principle DFT–LDA + U calculation
由: 2-s2.0-85128275541
出版: (2022)

Activated Carbon–Modified Iron Oxide Nanoparticles for Cr(VI) Removal: Optimization, Kinetics, Isotherms, Thermodynamics, Regeneration, and Mechanism Study
由: Sahu U.K.; Tripathy S.; Gouda N.; Mohanty H.S.; Sahu M.K.; Panda S.P.; Krishna Y.M.; Samantaray S.; Kumar V.S.R.; Banu N.; Acharya S.; Jawad A.H.
出版: (2023)

Effect of inlet slot number on the spray cone angle and discharge coefficient of swirl atomizer
由: 2-s2.0-84901023970
出版: (2012)

Palladium Complexes Derived from Waste as Catalysts for C-H Functionalisation and C-N Bond Formation
由: Jantan K.A.; Ekart G.; McCarthy S.; White A.J.P.; Braddock D.C.; Serpe A.; Wilton-Ely J.D.E.T.
出版: (2024)