Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C

QR Code

Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C

The purpose of this project is to study the encouragement of three machining parameters on wire electrical discharge machining that consist of peak current (IP), pulse OFF time (OFF) and wire tension (WT) to three machining responses which are cutting rate (CR), material removal rate (MRR) and surfa...

Full description

Bibliographic Details
Published in:	Jurnal Teknologi
Main Author:	2-s2.0-84943270190
Format:	Article
Language:	English
Published:	Penerbit UTM Press 2015
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84943270190&doi=10.11113%2fjt.v76.5701&partnerID=40&md5=55f5c149a81e271afaa0b88b6531f3f0

Similar Items

Multi-objective optimization in wire-electrical discharge machining (WEDM) of titanium alloy
by: Saedon J.B.; Jaafar N.; Nor N.H.M.; Yahaya M.A.; Husain H.
Published: (2015)

Influence of machine feed rate in WEDM of Titanium Ti-6Al-4V with constant current (6A) using brass wire
by: 2-s2.0-84901048392
Published: (2012)

A review on current research trends in electrical discharge machining (EDM)
by: 2-s2.0-33947193401
Published: (2007)

Investigation of Tensile Test on Back-to-Back Web Connection of Cold-Formed Steel C-Section
by: Muhammad Alif I.R.; Kamarudin A.F.; Seyed Hakim S.J.; Musa M.K.; Hamid S.; Mohammadhasani M.; Rathomy Romeli M.A.
Published: (2024)

Investigation of Tensile Test on Back-to-Back Web Connection of Cold-Formed Steel C-Section
by: 2-s2.0-85200314989
Published: (2024)

Investigation of failure analysis on fatigue crack initiation influenced by critical resolved shear stress in X10CrMoVNb9-1 steel
by: Abd Rahim, et al.
Published: (2024)

Mode-locked erbium-doped fiber laser based on Cr2GaC saturable absorber
by: 2-s2.0-85195815563
Published: (2024)

Structural, optical and electrical properties of ZnO/Zn 2 GeO 4 porous-like thin film and wires
by: 2-s2.0-79951682791
Published: (2011)

Experimental Analysis of Cold-Formed Steel C-Sections with the Notch Subjected to Axial Compression
by: Sani M.S.H.M.; Muftah F.; Tan C.S.
Published: (2020)

FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES
by: 2-s2.0-85149545468
Published: (2022)

Effect of Cr3+ substitution at Mn-site on electrical and magnetic properties of charge ordered Bi0.3Pr0.3Ca0.4MnO3 manganites
by: 2-s2.0-85047261330
Published: (2018)

Investigating the Effect of Electric Vehicle (EV) in the Protection Distribution System
by: 2-s2.0-85219539997
Published: (2024)

Investigating and Modeling Ageing Effects on Polymeric Insulator Electrical Properties
by: 2-s2.0-85165909376
Published: (2023)

Microstructure and microhardness properties of Fe-Cr-Al2O 3 composites
by: 2-s2.0-78049499296
Published: (2010)

Research challenges, quality control and monitoring strategy for Wire Arc Additive Manufacturing
by: 2-s2.0-85151789154
Published: (2023)

Performance evaluation of high discharge estuarine hydrodynamic model
by: Salleh, et al.
Published: (2025)

Performance evaluation of high discharge estuarine hydrodynamic model
by: 2-s2.0-85219135938
Published: (2025)

Partial Discharges Identification and Localisation within Transformer Windings
by: 2-s2.0-85097998275
Published: (2020)

Numerical Investigation of the Failure of Stiffened Steel Plates Subjected to Near-Field Blast Loads
by: Razak N.S.A.; Alias A.; Mohsan N.M.; Masjuki S.A.
Published: (2023)

Reinforced concrete slab with added steel fibers for engineering application: Preliminary experimental investigations
by: 2-s2.0-85115439629
Published: (2021)

Simulation and experiment of 50% calcium oxide-sand mixture in a bubbling fluidized bed CO2 absorption reactor
by: 2-s2.0-84956989213
Published: (2014)

New phase of lead chalcogenide alloy: Ternary alloy PbSrSe2 for future thermoelectric application
by: 2-s2.0-85129367580
Published: (2022)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
by: 2-s2.0-84971469649
Published: (2016)

Stand structure, biomass estimation and population dynamics of Rhizophoraceae in 50-ha plot at Pasoh Forest Reserve, Negeri Sembilan, Malaysia
by: Fitri A.Z.; Hafiz M.M.A.; Hazlan N.N.H.; Norafida N.N.A.; Norilani W.W.I.; Latiff A.
Published: (2023)

Stand structure, biomass estimation and population dynamics of Rhizophoraceae in 50-ha plot at Pasoh Forest Reserve, Negeri Sembilan, Malaysia
by: 2-s2.0-85215869558
Published: (2023)

XPS and DFT investigations of corrosion inhibition of substituted benzylidene Schiff bases on mild steel in hydrochloric acid
by: 2-s2.0-85060555005
Published: (2019)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
by: Mohd Mansor M.S.; Raja S.; Yusof F.; Muhamad M.R.; Manurung Y.H.; Adenan M.S.; Hussein N.I.S.; Ren J.
Published: (2024)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
by: 2-s2.0-85189668193
Published: (2024)

Indoor flow datasets of two-layered cross-ventilation models by particle image velocimetry and hot wire anemometry
by: 2-s2.0-85178589629
Published: (2024)

Anodic oxidation of Zr-5Fe alloy in ethylene glycol/fluoride electrolyte for Cr(VI) removal under sunlight
by: Jelaini F.J.; Bashirom N.; Fauzi N.H.N.C.; Isa N.
Published: (2024)

Impact of microstructure morphology on fatigue crack initiation in 9Cr-1Mo (P91) through numerical simulation
by: 2-s2.0-85195538700
Published: (2024)

Backwater Effect of Tidal Water Level Fluctuation and Riverine Discharge in An Idealized River
by: 2-s2.0-85086903427
Published: (2020)

Missing River Discharge Data Imputation Approach using Artificial Neural Network
by: 2-s2.0-85101170010
Published: (2015)

CL-SR: Boosting Imbalanced Image Classification with Contrastive Learning and Synthetic Minority Oversampling Technique Based on Rough Set Theory Integration
by: Gao X.; Jamil N.; Ramli M.I.
Published: (2024)

Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications
by: 2-s2.0-84863725211
Published: (2012)

Synthesis and single-molecule imaging reveal stereospecific enhancement of binding kinetics by the antitumour eEF1A antagonist SR-A3
by: 2-s2.0-85138252320
Published: (2022)

Structural, electronic and optical studies of Sr2NiTeO6 double perovskite by first-principle DFT–LDA + U calculation
by: 2-s2.0-85128275541
Published: (2022)

Activated Carbon–Modified Iron Oxide Nanoparticles for Cr(VI) Removal: Optimization, Kinetics, Isotherms, Thermodynamics, Regeneration, and Mechanism Study
by: Sahu U.K.; Tripathy S.; Gouda N.; Mohanty H.S.; Sahu M.K.; Panda S.P.; Krishna Y.M.; Samantaray S.; Kumar V.S.R.; Banu N.; Acharya S.; Jawad A.H.
Published: (2023)

Effect of inlet slot number on the spray cone angle and discharge coefficient of swirl atomizer
by: 2-s2.0-84901023970
Published: (2012)

Palladium Complexes Derived from Waste as Catalysts for C-H Functionalisation and C-N Bond Formation
by: Jantan K.A.; Ekart G.; McCarthy S.; White A.J.P.; Braddock D.C.; Serpe A.; Wilton-Ely J.D.E.T.
Published: (2024)