DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS

QR رمز

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS

DNA-based point-of-care (POC) diagnostics require rapid, accurate, and portable platforms for detection of infectious diseases. This can be achieved by incorporating a loop-mediated isothermal amplification (LAMP) process for DNA amplification into the system. LAMP offers a promising in-situ solutio...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	IIUM Engineering Journal
المؤلف الرئيسي:	ATAN M.K.F.M.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; GUNAWAN T.S.; ZAIN Z.M.
التنسيق:	مقال
اللغة:	English
منشور في:	International Islamic University Malaysia-IIUM 2025
الوصول للمادة أونلاين:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85216408703&doi=10.31436%2fIIUMEJ.V26I1.3407&partnerID=40&md5=b68d6c1611264361d2b020912bfe4790

مواد مشابهة

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
بواسطة: Atan, وآخرون
منشور في: (2025)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
بواسطة: HISHAM B.N.B.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; ZA'BAH N.F.; TUNG L.H.; ZAIN Z.M.
منشور في: (2025)

Microheater Comparative Study of S-Shape, Serpentine, and Dual C Configurations for Microfluidic Applications
بواسطة: Nasarudin, وآخرون
منشور في: (2024)

Microheater Comparative Study of S-Shape, Serpentine, and Dual C Configurations for Microfluidic Applications
بواسطة: Nasarudin W.N.N.W.; Husaini Y.; Yaakub T.N.T.
منشور في: (2024)

Fabrication and Characterization of Simple Structure Fluidic-Based Memristor for Immunosensing of NS1 Protein Application
بواسطة: 2-s2.0-85094222201
منشور في: (2020)

On-board Truck Weight Sensing System based on Current Loop Transmission
بواسطة: Suhaini M.Z.; Ng K.M.; Zaman F.H.K.; Abdullah S.A.C.; Salleh F.
منشور في: (2024)

Hysteresis loops of base isolation system-an overview
بواسطة: 2-s2.0-85104346296
منشور في: (2021)

Amplification-free and direct fluorometric determination of telomerase activity in cell lysates using chimeric DNA-templated silver nanoclusters
بواسطة: Lee S.T.; Rahman R.; Muthoosamy K.; Mohamed N.A.H.; Su X.D.; Tayyab S.; New S.Y.
منشور في: (2019)

Machine Parameters Estimation Using Closed-Loop Control Signal Curve Fitting
بواسطة: Wan Abdul Munim W.N.; Che H.S.; Tousizadeh M.; Baharom R.; Muhammad K.S.; Abdul Rahman N.F.
منشور في: (2024)

Modeling and optimization of the adsorptive removal of crystal violet dye by durian (Durio zibethinus) seeds powder: insight into kinetic, isotherm, thermodynamic, and adsorption mechanism
بواسطة: Jani N.A.; Haddad L.; Abdulhameed A.S.; Jawad A.H.; ALOthman Z.A.; Yaseen Z.M.
منشور في: (2024)

Block diagonalization precoding for multiuser –MIMO downlink channel
بواسطة: Mat Zain N.A.; Abdul Razak N.I.; Idris M.S.
منشور في: (2016)

ENHANCING HEAT TRANSFER IN CHANNEL FLOW USING SYNTHETIC JETS
بواسطة: Azmi H.; Basri M.H.; Ismail N.I.; Pahmi M.A.A.H.; Mat S.C.; Othman R.
منشور في: (2024)

On the nonclassical dynamics of cavity-assisted four-channel nonlinear coupler
بواسطة: Julius R.; Ibrahim A.-B.M.A.; Choudhury P.K.; Eleuch H.
منشور في: (2018)

A MINI REVIEW ON THE EFFECTS OF SURFACE ROUGHNESS IN MICROFIUIDICS CHANNELS
بواسطة: Mohamed Rijal M.L.; Mohamed Yusof A.; Mohamed Noor R.; Zubair A.F.
منشور في: (2024)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
بواسطة: Hisham, وآخرون
منشور في: (2025)

Flat-gain optical amplification within 70 nm wavelength band using 199 cm long hybrid erbium fibers
بواسطة: 2-s2.0-85074346298
منشور في: (2019)

Machine Parameters Estimation Using Closed - Loop Control Signal Curve Fitting
بواسطة: Munim, وآخرون
منشور في: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
بواسطة: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
منشور في: (2025)

Challenges in marketing channel selection by smallholder pineapple growers in Samarahan, Sarawak, Malaysia
بواسطة: Nahar A.; Saili A.R.; Hamzah N.M.; Abdul Fatah F.; Yusop Z.; Kamarul Zaman N.B.
منشور في: (2020)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
بواسطة: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
منشور في: (2022)

System Reconfiguration to Control Knee Extension with Time Delay Nonlinearity in Closed-Loop FES
بواسطة: 2-s2.0-85207092810
منشور في: (2024)

Kinetic and isotherm adsorption studies of methylene blue on sulfuric acid treated spent grated coconut (Cocos nucifera)
بواسطة: Khalid K.; Hanafiah M.A.K.M.
منشور في: (2014)

Adsorption isotherms, kinetics, and thermodynamics of Au(III) on chitosan/palm kernel fatty acid distillate/magnetite nanocomposites
بواسطة: Chang S.H.; Jampang A.O.A.; Din A.T.M.
منشور في: (2025)

Temperature development of cold formed steel column channel section under standard fire
بواسطة: Muftah F.; Sani M.S.H.M.; Mohammad S.; Ngian S.P.; Tahir M.M.
منشور في: (2016)

Lower desorption temperature in CO2 capture using various magnesium oxide loading on iron(III) oxide by ultrasonic-assisted synthesis: the adsorption-desorption and isotherm studies
بواسطة: Lahuri A.H.; Jaafar N.F.; Nordin N.; Dzakaria N.; Mohd Yusof S.; Samidin S.; Sulaiman S.N.; Marliza T.S.
منشور في: (2025)

PID-DTC Controller for Nonlinear Knee Extension Model with Time Delay Effect in Closed-Loop FES
بواسطة: 2-s2.0-85207102028
منشور في: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
بواسطة: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
منشور في: (2024)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
بواسطة: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
منشور في: (2023)

Effects of Infill Density, Wall Perimeter and Layer Height in Fabricating 3D Printing Products
بواسطة: Mazlan M.A.; Anas M.A.; Nor Izmin N.A.; Abdullah A.H.
منشور في: (2023)

Performance evaluation of transmission for multiuser MIMO broadcast channel
بواسطة: 2-s2.0-84970991261
منشور في: (2016)

Boost active power factor correction converter using various current controllers in double loop control algorithm
بواسطة: 2-s2.0-85100584413
منشور في: (2020)

Enhancing 3D Printed Bed-Resting Ankle-Foot Orthosis Design through Topology Optimization
بواسطة: Ab Rashid A.M.; Mukhainizam A.H.D.; Rashid H.; Ramlee M.H.; Pangesty A.I.; Abdullah A.H.
منشور في: (2024)

Computational fluid dynamics study of Y3+-doped Ba(Ce,Zr)O3 based single channel proton ceramic fuel cell
بواسطة: Malik L.A.; Missnan M.I.; Hassan O.H.; Jani A.M.M.; Rahman H.A.; Luengchavanon M.; Osman N.
منشور في: (2023)

Conserved gating elements in TRPC4 and TRPC5 channels
بواسطة: 2-s2.0-84880072077
منشور في: (2013)

Hydrometallurgical Recovery of Copper from Computer-Printed Circuit Boards
بواسطة: Jani W.N.F.A.; Rani N.H.A.; Mohamad N.F.; Jamaludin S.I.S.
منشور في: (2025)

Isotherm and kinetic models of SO2 adsorption on palm kernel shell-activated carbon and xerogel blends: Effect of flow rate and contact time
بواسطة: Saleh A.M.; Alias A.B.; Hasan S.S.A.S.; Jawad A.H.; Shihab T.A.; Ali O.M.; Ghani W.A.W.A.K.; Mahdi H.H.; Saleh N.M.; Ahmed O.K.
منشور في: (2025)

Progress in etching-driven MXene synthesis and utilization in conductive inks for printed electronics applications: A comprehensive review
بواسطة: Htwe Y.Z.N.; Bakar S.A.; Mohamed A.; Muqoyyanah; Othman M.H.D.; Mamat M.H.; Ahmad M.K.; Azis M.N.A.; Nuryadi R.; Ramakrishna S.; Salah N.; Alshahrie A.
منشور في: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
بواسطة: Adawiyah Zulkefli S.; Syamimi Ismail N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
منشور في: (2024)

Detection of Human Bodies in Lying Position based on Aggregate Channel Features
بواسطة: 2-s2.0-85084292922
منشور في: (2020)

Development of Ophthalmology Eye Examination Device using 3D Printing Technology
بواسطة: Abdullah A.H.; Alimarizan F.; Aziz N.A.A.; Hazwani F.; Marwan S.H.
منشور في: (2024)