Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures

QR Code

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures

Bone fracture is the most common orthopedics problem. To achieve stability in the internal fixation of bone fragments, apply a Locking Compression Plate (LCP), which consists of a set of plates and screws. Common materials used for the bone fixation plate are stainless steel, titanium, and other met...

Full description

Bibliographic Details
Published in:	Journal of Mechanical Engineering
Main Author:	Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
Format:	Article
Language:	English
Published:	UiTM Press 2024
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85215704856&doi=10.24191%2fjmeche.v13i1.2843&partnerID=40&md5=fe359eb5a71ead103274685a6dc219a7

Similar Items

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure
by: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Nazeri M.N.; Shuib S.
Published: (2024)

Experimental Analysis on Grain Growth Kinetics of SS316L Austenitic Stainless Steel
by: Mat M.F.; Manurung Y.H.P.; Busari Y.O.; Adenan M.S.; Sulaiman M.S.; Muhammad N.; Mekanikal J.K.; Graf M.
Published: (2021)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
by: 2-s2.0-84971469649
Published: (2016)

A preliminary study into the effect of oxide chemistry on the bonding mechanism of cold-sprayed titanium dioxide coatings on SUS316 stainless steel substrate
by: Omar N.I.B.; Mohamed S.B.; Yusuf Y.B.; Rahim T.B.A.; Mustafa Z.B.; Ismail S.B.; Bakar I.A.B.A.; Selvamani S.
Published: (2022)

Non-Invasive Glucose Monitoring Based on Mid-Infrared Spectroscopy
by: 2-s2.0-85219577680
Published: (2025)

Justifications of Intellectual Property Rights: A Discussion on Locke and Hegel’s Theories
by: Khair M.H.M.; Hashim H.N.M.
Published: (2020)

Mechanical and thermal characterization of resin-infused cotton fabric/epoxy composites: Influence of woven construction parameters and surface treatments
by: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Shuib S.B.
Published: (2024)

FUNCTIONAL RECOVERY OF DISTAL RADIUS FRACTURE: AN INTERPRETATIVE PHENOMENOLOGICAL ANALYSIS
by: 2-s2.0-85164567930
Published: (2023)

Epoxy adhesives modified with nano- and microparticles for in situ timber bonding: Fracture toughness characteristics
by: Ahmad Z.; Ansell M.P.; Smedley D.
Published: (2011)

FRACTURE CHARACTERISTICS OF PLA SYNTHETIC BONE SCAFFOLDS WITH DIFFERENT SPECIMEN POROSITIES
by: 2-s2.0-85176417950
Published: (2023)

Modernizing Home Protection: An IoT-Driven Approach with Smart Lock and Android Application
by: Rajput S.; Talpur N.; Boudville R.; Abro G.M.E.; Talpur B.; Zahid F.
Published: (2024)

Outcome of Locking Plate Fixation Adjunctive to Intramedullary Rodding in Osteogenesis Imperfecta Patients
by: Shuhiamy N.N.A.; Lee W.; Didi F.I.; Song M.H.; Shin C.H.; Cho T.-J.
Published: (2025)

Fracture toughness of thixotropic and room temperature cured epoxy-based adhesives for in situ timber bonding
by: Ahmad Z.; Ansell M.; Smedley D.
Published: (2010)

Performance Comparison between Polyester and Denim Textile Antenna on Non-Identical Human Upper Arm Sizes for 5G mid-band
by: Noor S.K.; Ramli N.; Rahman N.H.A.; Najib Mohd Yasin M.
Published: (2021)

FRACTURE MECHANISM ANALYSIS OF BONE SCAFFOLD UNDER TENSILE LOAD: THE EFFECT OF POROSITY
by: 2-s2.0-85176599962
Published: (2023)

Mechanical Response and Failure Analysis of Stainless-Steel Beams Exposed to Elevated Temperatures
by: Hazizan N.A.; Wahid N.; Zakwan F.A.A.; Ismail R.; Hashim M.H.M.; Ahmad H.; Goh L.D.
Published: (2024)

Effect of Temperature Variation on Wear Behaviour of Austenitic Stainless Steel
by: 2-s2.0-85012271921
Published: (2016)

Outcome of Locking Plate Fixation Adjunctive to Intramedullary Rodding in Osteogenesis Imperfecta Patients
by: Shuhiamy, et al.
Published: (2025)

Outcome of Locking Plate Fixation Adjunctive to Intramedullary Rodding in Osteogenesis Imperfecta Patients
by: 2-s2.0-85208559821
Published: (2025)

Mechanical Properties of Compression Garments
by: 2-s2.0-85163464620
Published: (2023)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
by: Paijan L.H.; Maleque M.A.; Rosli Z.M.; Abdollah M.F.; Mamat M.F.; Idriss A.N.M.
Published: (2024)

Mode-locked erbium-doped fiber laser based on Cr2GaC saturable absorber
by: 2-s2.0-85195815563
Published: (2024)

Is there an Association between Dietary Micronutrients Intake and Bone Fractures among Malaysian Reproductive-Age Women? The PURE Malaysia Study
by: Isa, et al.
Published: (2024)

Effects of Species, Adhesive, and Structural Configurations on Compression Parallel to the Grain of Laminated Bamboo
by: Yusof N.M.; Tahir P.M.; Hua L.S.; Yusoff M.Z.M.; James R.M.S.; Johari I.; Al-Edrus S.S.A.O.
Published: (2025)

Exploratory Structural Modification and Nonlinear Based Analysis of Tuned Mass Dampers
by: Rousou K.; Abdul Rani M.N.; Bahari A.R.; Kyprianou A.
Published: (2024)

Surface Modification of Regenerative Cellulose (RC) for Biomedical Applications
by: 2-s2.0-85156111942
Published: (2023)

Finite element model updating on structural components of simplified model of aircraft pylon
by: Bahari A.R.; Yunus M.A.; Rani M.N.A.; Shah M.A.S.A.; Mirza W.I.I.W.I.
Published: (2022)

Compressive strength properties of Malaysian tropical timber in structural size: Timber strength grading
by: Azlan H.M.; Puaad M.B.F.M.; Ahmad Z.; Talip A.R.A.; Yasin M.H.
Published: (2018)

Effect of die and punch radius on springback of stainless steel sheet metal in the air V-die bending process
by: 2-s2.0-84938631780
Published: (2015)

Experimental Analysis of Cold-Formed Steel C-Sections with the Notch Subjected to Axial Compression
by: Sani M.S.H.M.; Muftah F.; Tan C.S.
Published: (2020)

Modification on PERVAL dimensions for protected area: Ecotourism perceived value in today’s pandemic environment
by: Nordin M.R.; Jamal S.A.; Anuar N.A.M.
Published: (2023)

Synthesis of catechol-amine coating solution for membrane surface modification
by: 2-s2.0-85130757092
Published: (2023)

A modifications of conjugate gradient method for unconstrained optimization problems
by: 2-s2.0-85045397706
Published: (2018)

Synthesis and characterization trihydroxyl polybenzoxazine precursor for post-polymer modifications
by: 2-s2.0-84903129452
Published: (2014)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
by: Hanipah S.H.; C. Hassan N.F.N.; Talib A.T.; P Mohammed M.A.; Wakisaka M.; Abdullah Z.
Published: (2025)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
by: Paijan, et al.
Published: (2024)

A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant
by: Al-Tam B.Y.; Ramlee M.H.; Wahab A.A.; Seng G.H.; Abdullah A.H.
Published: (2023)

The effect of silica fume admixture on the compressive strength of the cellular lightweight concrete
by: 2-s2.0-85130828108
Published: (2022)

Mechanical and optical properties of polymeric nitrogen achieved by compression: DFT study
by: 2-s2.0-85114121477
Published: (2021)

Physical, chemical and morphology characterisation of nano ceramic powder as bitumen modification
by: 2-s2.0-85070814684
Published: (2021)