THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS

QR Code

THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS

Plastic 3D printing is currently in-trend for producing custom parts and products with intricate geometry. Fused Filament Fabrication (FFF) is one of the preferred technologies, as it requires a simple operation with affordable equipment setup. Previous studies have achieved many breakthroughs in us...

书目详细资料
发表在:	Jurnal Mekanikal
主要作者:	Maideen N.C.; Nazri M.H.; Budin S.; Hyie K.M.; Yusoff H.; Sahudin S.
格式:	文件
语言:	English
出版:	Penerbit UTM Press 2023
在线阅读:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85213397400&doi=10.11113%2fjm.v46.490&partnerID=40&md5=7da419153f885da52a178ed1756ec1c7

相似书籍

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
由: 2-s2.0-85166774849
出版: (2023)

Development of Real-Time Quality Feedback System Using Web-Based Software for an Automotive Parts Factory
由: Rusli M.H.M.; Kayat S.B.; Sohaimi M.A.T.B.M.; Hassan M.K.B.
出版: (2024)

Influence of Drying Temperature in the Oven on Physical, Morphology and Mechanical Properties of Mycelium Composite
由: Farrahnoor A.; Hishamuddini A.D.N.; Yusoff H.; Hyie K.M.; Maideen N.C.; Fohimi N.A.M.; Zhou B.T.
出版: (2025)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
由: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
出版: (2023)

Resource-Efficient 64-bit Karatsuba Multiplier using LUTs and DSP slices
由: Hashim, et al.
出版: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
由: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
出版: (2024)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
由: 2-s2.0-85189024462
出版: (2024)

Enhancing 3D Printed Bed-Resting Ankle-Foot Orthosis Design through Topology Optimization
由: Ab Rashid A.M.; Mukhainizam A.H.D.; Rashid H.; Ramlee M.H.; Pangesty A.I.; Abdullah A.H.
出版: (2024)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
由: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
出版: (2022)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
由: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
出版: (2025)

A Study of 3D Printed Box Structure
由: 2-s2.0-85104174597
出版: (2021)

Development and future prospects of 3D printed surimi products: A review
由: Diao D.; Yang R.; Liu Y.; Zhao Y.; Chen M.; Chen Y.; Zheng B.; Khong H.Y.
出版: (2025)

Development of Ophthalmology Eye Examination Device using 3D Printing Technology
由: Abdullah A.H.; Alimarizan F.; Aziz N.A.A.; Hazwani F.; Marwan S.H.
出版: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
由: Shahar, et al.
出版: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
由: 2-s2.0-85215705046
出版: (2025)

Effects of Infill Density, Wall Perimeter and Layer Height in Fabricating 3D Printing Products
由: Mazlan M.A.; Anas M.A.; Nor Izmin N.A.; Abdullah A.H.
出版: (2023)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
由: 2-s2.0-85122086227
出版: (2022)

Fault Tolerance Mechanism for Software Application Through Fog Computing as Middleware
由: Naim M.H.; Zain J.M.; Jalil K.A.
出版: (2022)

Development and future prospects of 3D printed surimi products: A review
由: Diao, et al.
出版: (2025)

Plant oil body as an effective improver for surimi-based 3D printing
由: 2-s2.0-85204039180
出版: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
由: Adawiyah Zulkefli S.; Syamimi Ismail N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版: (2024)

Development and Analysis of 3D Printed Knee Orthosis for Post Anterior Cruciate Ligament Injuries Rehabilitation
由: 2-s2.0-85213306488
出版: (2024)

Graph Based Method for Lathe Machining Part Model
由: 2-s2.0-85098853540
出版: (2020)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
由: ATAN M.K.F.M.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; GUNAWAN T.S.; ZAIN Z.M.
出版: (2025)

Motives of taking part in malay silat, karate-do and taekwondo
由: 2-s2.0-84938690651
出版: (2015)

Axle overloading at the southern part of the North-South Expressway in Malaysia
由: 2-s2.0-84864223304
出版: (2012)

A comprehensive review on recent biological innovations to improve biogas production, Part 1: Upstream strategies
由: Tabatabaei M.; Aghbashlo M.; Valijanian E.; Kazemi Shariat Panahi H.; Nizami A.-S.; Ghanavati H.; Sulaiman A.; Mirmohamadsadeghi S.; Karimi K.
出版: (2020)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
由: 2-s2.0-85132112562
出版: (2022)

DEVELOPMENT AND CHARACTERISATION OF PANTOGRAPH SLIDES FOR RAILWAY APPLICATIONS: A SHORT REVIEW
由: Fadzil F.M.; Hyie K.M.; Selamat M.A.
出版: (2023)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
由: Atan, et al.
出版: (2025)

Development of software for collecting cleft-specific data in Malaysia
由: Shahrul, et al.
出版: (2025)

Development of software for collecting cleft-specific data in Malaysia
由: 2-s2.0-86000111806
出版: (2025)

Theoretical perspectives of the HCD integration in software development process
由: 2-s2.0-85073876714
出版: (2019)

Biomechanical Evaluation of Three Dimensionally Printed Passive Transfemoral Leg Socket Compliance with ISO 10328: A Comparison of Two Different Designs
由: Tihani Nazemi N.; Muhammad Shahril A.Z.; Hanif Baharuddin M.; Izzudin Abd Samad M.; Olsen J.; Goh K.-L.; Swain S.; Halim Abdullah A.; Ikhwan Jamaluddin M.; Hanif Ramlee M.
出版: (2024)

Application of the Technology- Organization- Environment Framework on Big Data Analytics Deployment in Manufacturing and Service
由: Urus, et al.
出版: (2024)

Analysing smart home security using packet tracer simulation software
由: Abdul Aziz N.N.; Anak Rechie R.M.; Mohd Bakry B.B.; Rahman R.A.B.; Yussoff Y.M.
出版: (2021)

Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system
由: Ismail M.H.; Sidambe A.T.; Figueroa I.A.; Davies H.A.; Todd I.
出版: (2010)

Ergonomics as a lean manufacturing tool for improvements in a manufacturing company
由: 2-s2.0-85018440148
出版: (2016)

Study on antioxidant capacity and phenolic content of various parts of wax gourd (Benincasa hispida)
由: 2-s2.0-84867686700
出版: (2012)

Mapping Study of Critical Success Factor for Agile Software Project
由: 2-s2.0-85148458474
出版: (2022)