Performance of Carbide Lime Waste Mortar via 24 Hours Accelerated CO2 Curing

QRコード

Performance of Carbide Lime Waste Mortar via 24 Hours Accelerated CO2 Curing

This paper explores the use of Calcium Lime Waste (CLW) as a cementitious material for early CO2 capture. CLW, primarily composed of Calcium Hydroxide Ca(OH)2, has high CaO content, making it ideal for CO2 sequestration. CLW was added to Ordinary Portland Cement (OPC) mortar as a 0-40% replacement,...

書誌詳細
出版年:	International Journal of Integrated Engineering
第一著者:	Talip A.R.A.; Khalid N.H.A.; sam A.R.M.; Joudah Z.H.; Othman R.
フォーマット:	論文
言語:	English
出版事項:	Penerbit UTHM 2024
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85212073595&doi=10.30880%2fijie.2024.16.09.004&partnerID=40&md5=eefda089838d4b940788f3594f7d0eaf

類似資料

Unconfined compressive strength of subgrade stabilized with coconut shell ash and lime in variation to curing time
著者:: Ramli R.; Al Aiman Abdul Halim M.; Mansor S.
出版事項: (2024)

Comparison of Ground-Borne Vibration Induced by Railway Within Peak and Non-peak Hours
著者:: Mohd Lazi M.K.A.; Adnan M.A.; Sulaiman N.; Shahrir M.D.
出版事項: (2021)

Silicon carbide formation from natural woods
著者:: Hyie K.M.; Muda S.S.; Elias H.M.; Rahman N.L.A.; Kalam A.
出版事項: (2015)

ENHANCING CORPORATE PHILANTHROPY THROUGH BOARD COMPETENCY AND FINANCIAL HEALTH: ACCELERATING PROGRESS TOWARDS SUSTAINABLE
著者:: Ahmad R.A.R.; Sata F.H.A.; Azmi N.A.; Zainon S.; Probohudono A.N.
出版事項: (2025)

The Intense geomagnetic storm on March 24, 2023, associated with Halo CMEs and solar flares
著者:: Zafar S.N.A.S.; Umar R.; Sabri N.H.; Jusoh M.H.; Yoshikawa A.; Abe S.; Uozumi T.
出版事項: (2024)

Exploring the physical behavior of surface-functionalized two-dimensional Tungsten carbide/nitride MXenes
著者:: Ul Haq B.; Kim S.-H.; Ahmed R.; Taib M.F.M.; Rasool Chaudhry A.; Seddik T.; Laref A.
出版事項: (2024)

Influence of chloride acceleration methods on the electrochemical behaviour of superplasticiser admixed reinforced cementitious systems
著者:: Hemalatha C.; Mohammed M.S.H.S.; Vijayaraghavan R.; Navabshan I.; Kudus S.A.
出版事項: (2025)

Sinomenine accelerate wound healing in rats by augmentation of antioxidant, anti-inflammatory, immunuhistochemical pathways
著者:: Jabbar A.A.J.; Abdul-Aziz Ahmed K.; Abdulla M.A.; Abdullah F.O.; Salehen N.A.; Mothana R.A.; Houssaini J.; Hassan R.R.; Hawwal M.F.; Fantoukh O.I.; Hasson S.
出版事項: (2024)

Compressive strength properties of Malaysian tropical timber in structural size: Timber strength grading
著者:: Azlan H.M.; Puaad M.B.F.M.; Ahmad Z.; Talip A.R.A.; Yasin M.H.
出版事項: (2018)

Association between the time to definitive care and trauma patient outcomes: every minute in the golden hour matters
著者:: 2-s2.0-85133827313
出版事項: (2022)

Utilization of Recycled Egg Carton Pulp for Nitrocellulose as an Accelerant in Briquette Production
著者:: Andok A.; Lee S.H.; Gilbert Jesuet M.S.; Palle I.
出版事項: (2023)

Adoption and performance of click and mortar retailers: Malaysia evidence
著者:: Ali A.; Omar N.; Daud N.M.; Mohamed I.S.
出版事項: (2012)

Investigating The Strength and Density of Mortar with Rubber and Clamshell Powders
著者:: Shahidan N.I.I.; Yee H.M.; Mohd Apandi N.; Senin S.F.; Chong C.H.; Kim J.Y.
出版事項: (2025)

Curing kinetic study of tri-hydroxyl benzoxazine using differential scanning calorimetry
著者:: 2-s2.0-84903215269
出版事項: (2014)

Curing behaviour of unsaturated polyester resin and interfacial shear stress of sugar palm fibre
著者:: 2-s2.0-85042762145
出版事項: (2017)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
著者:: Rajendran R.C.; Anto T.; Agarwal A.; Ilunga M.; Jayamani E.; Natarajan V.D.
出版事項: (2024)

Enhancing Road Subgrade Strength with Lime Stabilised Residual Soil
著者:: 2-s2.0-86000317380
出版事項: (2025)

Fracture toughness of thixotropic and room temperature cured epoxy-based adhesives for in situ timber bonding
著者:: Ahmad Z.; Ansell M.; Smedley D.
出版事項: (2010)

Properties of high strength concrete using white and dune sands under normal and autoclaved curing
著者:: 2-s2.0-80755163489
出版事項: (2012)

The Effect of WO3-Doped Soda Lime Silica SLS Waste Glass to Develop Lead-Free Glass as a Shielding Material against Radiation
著者:: Khazaalah T.H.; Mustafa I.S.; Al-Ghamdi H.; Rahman A.A.; Sayyed M.I.; Almuqrin A.H.; Zaid M.H.M.; Hisam R.; Abdul Malik M.F.I.; Ezra N.S.; Shariff H.M.
出版事項: (2022)

Artificial neural network for modelling of the correlation between lateral acceleration and head movement in a motion sickness study
著者:: Saruchi S.A.; Mohammed Ariff M.H.; Zamzuri H.; Hassan N.; Wahid N.
出版事項: (2019)

Predictive Modelling Insights with Interpretable NARX - LIME for Geomagnetic Disturbance-Storm-Time Index
著者:: Mazlan, 等
出版事項: (2024)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
著者:: Paijan L.H.; Maleque M.A.; Rosli Z.M.; Abdollah M.F.; Mamat M.F.; Idriss A.N.M.
出版事項: (2024)

Injury severity among non-fatal children and adults related to motorcycle crashes
著者:: Faudzi S.A.M.; Zulkipli Z.H.; Wahid N.A.A.
出版事項: (2016)

The role of Gelam honey in accelerating reepithelialization of ex vivo corneal abrasion model
著者:: 2-s2.0-85101022434
出版事項: (2021)

Correction to: Application of deep learning and feature selection technique on external root resorption identification on CBCT images (BMC Oral Health, (2024), 24, 1, (252), 10.1186/s12903-024-03910-w)
著者:: Reduwan N.H.; Aziz A.A.; Razi R.M.; Abdullah E.R.M.F.; Nezhad S.M.M.; Gohain M.; Ibrahim N.
出版事項: (2025)

Control Strength Lightweight Mortar made by Recycled Concrete Aggregate and Expanded Perlite
著者:: Hasan, 等
出版事項: (2024)

Effect of Combined Carbon Nano Tubes and Graphene Oxide on the High-Volume Fly Ash Mortar Properties
著者:: Senin S.F.; Maizuar; Khairullah; Usrina N.; Desmi A.; Bahri S.; Phoenna N.
出版事項: (2024)

Shear strength and durability against wetting and drying cycles of lime-stabilised laterite soil as subgrade
著者:: 2-s2.0-85170432377
出版事項: (2023)

Gain enhancement of rectangular microstrip patch antenna using air gap at 2.4 ghz
著者:: 2-s2.0-85090649540
出版事項: (2020)

Synthetic N-aralkylated-N-(2,4-dimethylphenyl)benzenesulfonamides: As potent anti-bacterial agents
著者:: 2-s2.0-85009833752
出版事項: (2016)

Wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions
著者:: 2-s2.0-85082317767
出版事項: (2019)

Mechanical Properties of Mortar with Low-Density Polyethylene as Sand Replacement and Steel Fibre Additive
著者:: Tuan Lokman T.N.L.; Hooi Min Y.; Ahmad Zailani W.W.; Senin S.F.; Hwa C.C.; Yeol K.J.
出版事項: (2025)

Mechanical Properties of High-Volume Fly Ash Mortar Modified by Hybrid Carbon Nano Tube and Graphene Oxide
著者:: Maizuar; Fithra H.; Khairullah; Usrina N.; Bahri S.; Senin S.F.
出版事項: (2024)

The preliminary investigation on the performance of porous concrete drainage systems
著者:: Ahmad F.H.M.; Jamal M.H.; Sam A.R.M.; Mohtar I.S.A.; Lian C.N.A.; Ibrahim Z.
出版事項: (2022)

Strategy for accelerating the realization of climate-smart agriculture using a circular economy perspective approach
著者:: Prajanti S.D.W.; Soesilowati E.; Daud D.
出版事項: (2025)

Synthesis of 2,4-dihydroxyacetophenone derivatives as potent PDE-1 and -3 inhibitors: in vitro and in silico insights
著者:: 2-s2.0-85193757947
出版事項: (2024)

Novel isoxazolinyl spiropyrrolidinediones: 1,3-dipolar cycloaddition of 1-benzyl-3,3-dimethyl-5-methylenepyrrolidin-2,4-dione
著者:: Bathich Y.; Syed Monudeen Khan S.E.B.; Hamzah A.S.
出版事項: (2011)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
著者:: Paijan, 等
出版事項: (2024)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
著者:: Rajendran, 等
出版事項: (2024)