Performance of Carbide Lime Waste Mortar via 24 Hours Accelerated CO2 Curing

QR رمز

Performance of Carbide Lime Waste Mortar via 24 Hours Accelerated CO2 Curing

This paper explores the use of Calcium Lime Waste (CLW) as a cementitious material for early CO2 capture. CLW, primarily composed of Calcium Hydroxide Ca(OH)2, has high CaO content, making it ideal for CO2 sequestration. CLW was added to Ordinary Portland Cement (OPC) mortar as a 0-40% replacement,...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	International Journal of Integrated Engineering
المؤلف الرئيسي:	Talip A.R.A.; Khalid N.H.A.; sam A.R.M.; Joudah Z.H.; Othman R.
التنسيق:	مقال
اللغة:	English
منشور في:	Penerbit UTHM 2024
الوصول للمادة أونلاين:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85212073595&doi=10.30880%2fijie.2024.16.09.004&partnerID=40&md5=eefda089838d4b940788f3594f7d0eaf

مواد مشابهة

Unconfined compressive strength of subgrade stabilized with coconut shell ash and lime in variation to curing time
بواسطة: Ramli R.; Al Aiman Abdul Halim M.; Mansor S.
منشور في: (2024)

Comparison of Ground-Borne Vibration Induced by Railway Within Peak and Non-peak Hours
بواسطة: Mohd Lazi M.K.A.; Adnan M.A.; Sulaiman N.; Shahrir M.D.
منشور في: (2021)

Silicon carbide formation from natural woods
بواسطة: Hyie K.M.; Muda S.S.; Elias H.M.; Rahman N.L.A.; Kalam A.
منشور في: (2015)

ENHANCING CORPORATE PHILANTHROPY THROUGH BOARD COMPETENCY AND FINANCIAL HEALTH: ACCELERATING PROGRESS TOWARDS SUSTAINABLE
بواسطة: Ahmad R.A.R.; Sata F.H.A.; Azmi N.A.; Zainon S.; Probohudono A.N.
منشور في: (2025)

The Intense geomagnetic storm on March 24, 2023, associated with Halo CMEs and solar flares
بواسطة: Zafar S.N.A.S.; Umar R.; Sabri N.H.; Jusoh M.H.; Yoshikawa A.; Abe S.; Uozumi T.
منشور في: (2024)

Exploring the physical behavior of surface-functionalized two-dimensional Tungsten carbide/nitride MXenes
بواسطة: Ul Haq B.; Kim S.-H.; Ahmed R.; Taib M.F.M.; Rasool Chaudhry A.; Seddik T.; Laref A.
منشور في: (2024)

Influence of chloride acceleration methods on the electrochemical behaviour of superplasticiser admixed reinforced cementitious systems
بواسطة: Hemalatha C.; Mohammed M.S.H.S.; Vijayaraghavan R.; Navabshan I.; Kudus S.A.
منشور في: (2025)

Sinomenine accelerate wound healing in rats by augmentation of antioxidant, anti-inflammatory, immunuhistochemical pathways
بواسطة: Jabbar A.A.J.; Abdul-Aziz Ahmed K.; Abdulla M.A.; Abdullah F.O.; Salehen N.A.; Mothana R.A.; Houssaini J.; Hassan R.R.; Hawwal M.F.; Fantoukh O.I.; Hasson S.
منشور في: (2024)

Compressive strength properties of Malaysian tropical timber in structural size: Timber strength grading
بواسطة: Azlan H.M.; Puaad M.B.F.M.; Ahmad Z.; Talip A.R.A.; Yasin M.H.
منشور في: (2018)

Association between the time to definitive care and trauma patient outcomes: every minute in the golden hour matters
بواسطة: 2-s2.0-85133827313
منشور في: (2022)

Utilization of Recycled Egg Carton Pulp for Nitrocellulose as an Accelerant in Briquette Production
بواسطة: Andok A.; Lee S.H.; Gilbert Jesuet M.S.; Palle I.
منشور في: (2023)

Adoption and performance of click and mortar retailers: Malaysia evidence
بواسطة: Ali A.; Omar N.; Daud N.M.; Mohamed I.S.
منشور في: (2012)

Investigating The Strength and Density of Mortar with Rubber and Clamshell Powders
بواسطة: Shahidan N.I.I.; Yee H.M.; Mohd Apandi N.; Senin S.F.; Chong C.H.; Kim J.Y.
منشور في: (2025)

Curing kinetic study of tri-hydroxyl benzoxazine using differential scanning calorimetry
بواسطة: 2-s2.0-84903215269
منشور في: (2014)

Curing behaviour of unsaturated polyester resin and interfacial shear stress of sugar palm fibre
بواسطة: 2-s2.0-85042762145
منشور في: (2017)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
بواسطة: Rajendran R.C.; Anto T.; Agarwal A.; Ilunga M.; Jayamani E.; Natarajan V.D.
منشور في: (2024)

Enhancing Road Subgrade Strength with Lime Stabilised Residual Soil
بواسطة: 2-s2.0-86000317380
منشور في: (2025)

Fracture toughness of thixotropic and room temperature cured epoxy-based adhesives for in situ timber bonding
بواسطة: Ahmad Z.; Ansell M.; Smedley D.
منشور في: (2010)

Properties of high strength concrete using white and dune sands under normal and autoclaved curing
بواسطة: 2-s2.0-80755163489
منشور في: (2012)

The Effect of WO3-Doped Soda Lime Silica SLS Waste Glass to Develop Lead-Free Glass as a Shielding Material against Radiation
بواسطة: Khazaalah T.H.; Mustafa I.S.; Al-Ghamdi H.; Rahman A.A.; Sayyed M.I.; Almuqrin A.H.; Zaid M.H.M.; Hisam R.; Abdul Malik M.F.I.; Ezra N.S.; Shariff H.M.
منشور في: (2022)

Artificial neural network for modelling of the correlation between lateral acceleration and head movement in a motion sickness study
بواسطة: Saruchi S.A.; Mohammed Ariff M.H.; Zamzuri H.; Hassan N.; Wahid N.
منشور في: (2019)

Predictive Modelling Insights with Interpretable NARX - LIME for Geomagnetic Disturbance-Storm-Time Index
بواسطة: Mazlan, وآخرون
منشور في: (2024)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
بواسطة: Paijan L.H.; Maleque M.A.; Rosli Z.M.; Abdollah M.F.; Mamat M.F.; Idriss A.N.M.
منشور في: (2024)

Injury severity among non-fatal children and adults related to motorcycle crashes
بواسطة: Faudzi S.A.M.; Zulkipli Z.H.; Wahid N.A.A.
منشور في: (2016)

The role of Gelam honey in accelerating reepithelialization of ex vivo corneal abrasion model
بواسطة: 2-s2.0-85101022434
منشور في: (2021)

Correction to: Application of deep learning and feature selection technique on external root resorption identification on CBCT images (BMC Oral Health, (2024), 24, 1, (252), 10.1186/s12903-024-03910-w)
بواسطة: Reduwan N.H.; Aziz A.A.; Razi R.M.; Abdullah E.R.M.F.; Nezhad S.M.M.; Gohain M.; Ibrahim N.
منشور في: (2025)

Control Strength Lightweight Mortar made by Recycled Concrete Aggregate and Expanded Perlite
بواسطة: Hasan, وآخرون
منشور في: (2024)

Effect of Combined Carbon Nano Tubes and Graphene Oxide on the High-Volume Fly Ash Mortar Properties
بواسطة: Senin S.F.; Maizuar; Khairullah; Usrina N.; Desmi A.; Bahri S.; Phoenna N.
منشور في: (2024)

Shear strength and durability against wetting and drying cycles of lime-stabilised laterite soil as subgrade
بواسطة: 2-s2.0-85170432377
منشور في: (2023)

Gain enhancement of rectangular microstrip patch antenna using air gap at 2.4 ghz
بواسطة: 2-s2.0-85090649540
منشور في: (2020)

Synthetic N-aralkylated-N-(2,4-dimethylphenyl)benzenesulfonamides: As potent anti-bacterial agents
بواسطة: 2-s2.0-85009833752
منشور في: (2016)

Wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions
بواسطة: 2-s2.0-85082317767
منشور في: (2019)

Mechanical Properties of Mortar with Low-Density Polyethylene as Sand Replacement and Steel Fibre Additive
بواسطة: Tuan Lokman T.N.L.; Hooi Min Y.; Ahmad Zailani W.W.; Senin S.F.; Hwa C.C.; Yeol K.J.
منشور في: (2025)

Mechanical Properties of High-Volume Fly Ash Mortar Modified by Hybrid Carbon Nano Tube and Graphene Oxide
بواسطة: Maizuar; Fithra H.; Khairullah; Usrina N.; Bahri S.; Senin S.F.
منشور في: (2024)

The preliminary investigation on the performance of porous concrete drainage systems
بواسطة: Ahmad F.H.M.; Jamal M.H.; Sam A.R.M.; Mohtar I.S.A.; Lian C.N.A.; Ibrahim Z.
منشور في: (2022)

Strategy for accelerating the realization of climate-smart agriculture using a circular economy perspective approach
بواسطة: Prajanti S.D.W.; Soesilowati E.; Daud D.
منشور في: (2025)

Synthesis of 2,4-dihydroxyacetophenone derivatives as potent PDE-1 and -3 inhibitors: in vitro and in silico insights
بواسطة: 2-s2.0-85193757947
منشور في: (2024)

Novel isoxazolinyl spiropyrrolidinediones: 1,3-dipolar cycloaddition of 1-benzyl-3,3-dimethyl-5-methylenepyrrolidin-2,4-dione
بواسطة: Bathich Y.; Syed Monudeen Khan S.E.B.; Hamzah A.S.
منشور في: (2011)

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
بواسطة: Paijan, وآخرون
منشور في: (2024)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
بواسطة: Rajendran, وآخرون
منشور في: (2024)