A wideband and flat-gain of an amplifier by using zirconia-based erbium-doped fiber (Zr-EDF) for single pass pperation
An amplification for single pass operation was demonstrated by using Zirconia-based erbium-doped fiber (Zr-EDF). 1 m is the optimum length due to overall high gain and minimal noise figure from 1520 nm to 1620 nm. The highest gain is 28.62 dB at 1555 nm with the input signal and pump power are fixed...
Published in: | Jurnal Teknologi |
---|---|
Main Author: | Markom A.M.; Ahmad H.; Harun S.W. |
Format: | Article |
Language: | English |
Published: |
Penerbit UTM Press
2016
|
Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84960084456&doi=10.11113%2fjt.v78.7458&partnerID=40&md5=590adb1d3140d3285e537b6489389867 |
Similar Items
-
Flat-gain optical amplification within 70 nm wavelength band using 199 cm long hybrid erbium fibers
by: 2-s2.0-85074346298
Published: (2019) -
The Determination of Vehicle Speed at the Passing Distance in the Actual Traffic Flow
by: 2-s2.0-85096941462
Published: (2020) -
Design of Multiwavelength EDF-Raman Lasers Utilizing Mach-Zehnder Interferometer
by: 2-s2.0-85125597580
Published: (2021) -
Microstructural and physical properties of yttria stabilized zirconia (YSZ) prepared by ceramic injection moulding (CIM)
by: 2-s2.0-85119196043
Published: (2021) -
Investigation of a 130nm CMOS Low Noise Amplifier's Performance Across Corner Conditions for WLAN Applications
by: Azman, et al.
Published: (2024)