Effect of Catalyst Loading on Photocatalytic Degradation of Phenol by Using N, S Co-doped TiO2

The study on the effect of catalyst loading of photocatalytic degradation of phenol by using N, S co-doped TiO2 was investigated. The precursor of titania was Titanium (IV) isopropoxide (TTIP), while the sources of Nitrogen and Sulfur were ammonium nitrate and thiourea respectively. The photocatalys...

全面介紹

書目詳細資料
發表在:IOP Conference Series: Materials Science and Engineering
主要作者: 2-s2.0-85023187417
格式: Conference paper
語言:English
出版: Institute of Physics Publishing 2017
在線閱讀:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85023187417&doi=10.1088%2f1757-899X%2f206%2f1%2f012092&partnerID=40&md5=cb4cb182ddac4a2fbdbf35731592dd14
實物特徵
總結:The study on the effect of catalyst loading of photocatalytic degradation of phenol by using N, S co-doped TiO2 was investigated. The precursor of titania was Titanium (IV) isopropoxide (TTIP), while the sources of Nitrogen and Sulfur were ammonium nitrate and thiourea respectively. The photocatalyst were prepared by using dopant concentration at 1% of both Nitrogen and Sulphur that were prepared via sol-gel method. The photocatalyst were tested by different catalyst loading which were 1 g/L, 2g/L and 3 g/L. The gel obtained from the mixing process was dried and calcined at 600°C. The performance of the photocatalyst were tested by using phenol as a model pollutant. The mixture of photocatalyst and pollutant was left under visible light for five hours for irradiation time. The experiment showed that catalyst loading of 3 g/L able to fully degrade phenol while 1 g/L and 2 g/L of photocatalyst degraded phenol at 69.9% and 96.2% respectively. © Published under licence by IOP Publishing Ltd.
ISSN:17578981
DOI:10.1088/1757-899X/206/1/012092