Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology

Polyethylene materials are of great interest to be used in many applications due to their many advantageous characteristics. It is light, highly chemical resistant, easy to process, low in cost and has good mechanical properties. Polyethylene is widely used as a cable-insulating material. However, r...

全面介绍

书目详细资料
发表在:Materials
主要作者: 2-s2.0-85156085168
格式: 文件
语言:English
出版: MDPI 2023
在线阅读:https://www.scopus.com/inward/record.uri?eid=2-s2.0-85156085168&doi=10.3390%2fma16083122&partnerID=40&md5=9dea3b34c5cad84294c846b92dc4274d
id Sharudin R.W.; Md Azmi N.S.; Hanizan A.; Akhbar S.; Ahmad Z.; Ohshima M.
spelling Sharudin R.W.; Md Azmi N.S.; Hanizan A.; Akhbar S.; Ahmad Z.; Ohshima M.
2-s2.0-85156085168
Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology
2023
Materials
16
8
10.3390/ma16083122
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85156085168&doi=10.3390%2fma16083122&partnerID=40&md5=9dea3b34c5cad84294c846b92dc4274d
Polyethylene materials are of great interest to be used in many applications due to their many advantageous characteristics. It is light, highly chemical resistant, easy to process, low in cost and has good mechanical properties. Polyethylene is widely used as a cable-insulating material. However, research is still needed to further improve its insulation quality and properties. In this study, an experimental and alternative approach through a dynamic modeling method was conducted. The main objective was to investigate the effect of modified organoclay concentration on the properties of polyethylene/organoclay nanocomposites by observing their characterization and optical and mechanical properties. The thermogram curve reveals that 2 wt% organoclay used has the highest crystallinity (46.7%) while the highest amount of organoclay used produced the lowest crystallinity (31.2%). The presence of cracks was also observed mostly in the nanocomposite with higher content of organoclay, usually where 2.0 wt% and above of organoclay was used. Morphological observation from simulation results supports the experimental work. Only small pores were observed to form in lower concentrations, and as the concentration was increased to 2.0 wt% and above, the pores present became larger in size. Increasing the concentration of organoclay up to 2.0 wt% reduced the interfacial tension while increasing the concentration above 2.0 wt% did not bring any changes to the interfacial tension value. Different formulations produced different behavior of nanocomposite. Hence the control of the formulation was important to control the final result of the products for appropriate application in different sectors of industry. © 2023 by the authors.
MDPI
19961944
English
Article
All Open Access; Gold Open Access; Green Open Access
author 2-s2.0-85156085168
spellingShingle 2-s2.0-85156085168
Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology
author_facet 2-s2.0-85156085168
author_sort 2-s2.0-85156085168
title Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology
title_short Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology
title_full Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology
title_fullStr Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology
title_full_unstemmed Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology
title_sort Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology
publishDate 2023
container_title Materials
container_volume 16
container_issue 8
doi_str_mv 10.3390/ma16083122
url https://www.scopus.com/inward/record.uri?eid=2-s2.0-85156085168&doi=10.3390%2fma16083122&partnerID=40&md5=9dea3b34c5cad84294c846b92dc4274d
description Polyethylene materials are of great interest to be used in many applications due to their many advantageous characteristics. It is light, highly chemical resistant, easy to process, low in cost and has good mechanical properties. Polyethylene is widely used as a cable-insulating material. However, research is still needed to further improve its insulation quality and properties. In this study, an experimental and alternative approach through a dynamic modeling method was conducted. The main objective was to investigate the effect of modified organoclay concentration on the properties of polyethylene/organoclay nanocomposites by observing their characterization and optical and mechanical properties. The thermogram curve reveals that 2 wt% organoclay used has the highest crystallinity (46.7%) while the highest amount of organoclay used produced the lowest crystallinity (31.2%). The presence of cracks was also observed mostly in the nanocomposite with higher content of organoclay, usually where 2.0 wt% and above of organoclay was used. Morphological observation from simulation results supports the experimental work. Only small pores were observed to form in lower concentrations, and as the concentration was increased to 2.0 wt% and above, the pores present became larger in size. Increasing the concentration of organoclay up to 2.0 wt% reduced the interfacial tension while increasing the concentration above 2.0 wt% did not bring any changes to the interfacial tension value. Different formulations produced different behavior of nanocomposite. Hence the control of the formulation was important to control the final result of the products for appropriate application in different sectors of industry. © 2023 by the authors.
publisher MDPI
issn 19961944
language English
format Article
accesstype All Open Access; Gold Open Access; Green Open Access
record_format scopus
collection Scopus
_version_ 1828987865822920704