Assessment of Mechanical Properties of Recycled HDPE and LDPE Plastic Wastes

QRコード

Assessment of Mechanical Properties of Recycled HDPE and LDPE Plastic Wastes

Most plastic materials can be recycled, and turning them into some useful products can be one of the options in reducing environmental pollutions. In this project, High Density Polyethylene (HDPE) and Low Density Polyethylene (LDPE) were used, shredded into smaller pieces and were hot-pressed to bec...

書誌詳細
出版年:	IOP Conference Series: Materials Science and Engineering
第一著者:	2-s2.0-85097602008
フォーマット:	Conference paper
言語:	English
出版事項:	IOP Publishing Ltd 2020
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85097602008&doi=10.1088%2f1757-899X%2f957%2f1%2f012046&partnerID=40&md5=50051fa65bc69cadba20a1881f76972a

類似資料

Tensile properties of liner fabricated from the recycled food packaging plastic waste
著者:: 2-s2.0-85078623523
出版事項: (2019)

Characterization of Pyrolytic Oil from Different Blending Ratio of HDPE and PET Plastic Waste Through Gasification Pyrolysis Process
著者:: 2-s2.0-85213358003
出版事項: (2024)

Recent advances in recycling and upcycling of hazardous plastic waste: A review
著者:: 2-s2.0-86000457965
出版事項: (2025)

Characterization of Pyrolytic Oil from Different Blending Ratio of HDPE and PET Plastic Waste Through Gasification Pyrolysis Process
著者:: Masakhoh S.H.; Januri Z.; Rahman N.A.
出版事項: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
著者:: Seng, 等
出版事項: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
著者:: Seng T.K.; Zakaria M.S.; Nordin R.M.; Halim K.A.A.; Hayazi N.F.; Ibrahim L.H.
出版事項: (2024)

Plastic waste-to-fuel and sustainable development goals
著者:: 2-s2.0-85205363350
出版事項: (2024)

Co-pyrolysis of biomass and waste plastics for production of chemicals and liquid fuel: A review on the role of plastics and catalyst types
著者:: 2-s2.0-85141923496
出版事項: (2023)

Nanomaterials in recycled aggregates concrete applications: mechanical properties and durability. A review
著者:: 2-s2.0-85138256849
出版事項: (2022)

Mathematical modeling of plastic injection molding parameters to study the product quality through mechanical property evaluation
著者:: Venkatason K.; Sivaguru S.; Paizar A.R.; Roseley N.R.N.
出版事項: (2023)

Environmental perspectives of textile waste, environmental pollution and recycling
著者:: 2-s2.0-85128311675
出版事項: (2022)

Bibliometric analysis and an overview of the application of the non-precious materials for pyrolysis reaction of plastic waste
著者:: 2-s2.0-85149291632
出版事項: (2023)

A short review: Potential use of plastic waste as adsorbent for various pollutants
著者:: Abd-Aziz N.H.; Alias S.; Bashar N.A.M.; Amir A.; Abdul-Talib S.; Tay C.C.
出版事項: (2019)

Current recycling strategies and high-value utilization of waste cotton
著者:: 2-s2.0-85139345641
出版事項: (2023)

Particleboard from agricultural biomass and recycled wood waste: a review
著者:: 2-s2.0-85140798083
出版事項: (2022)

Attitude and expectation: Food waste recycling as a business opportunity in Terengganu
著者:: Wan Nawawi W.N.; Khalid S.A.; Ramli N.; Daud N.M.
出版事項: (2017)

Deep Learning Model for Enhancing Automated Recycling Machine with Incentive Mechanisms
著者:: 2-s2.0-85202952430
出版事項: (2024)

A multi-period model for reorganising urban household waste recycling networks
著者:: Zaharudin Z.A.; Brint A.; Genovese A.
出版事項: (2022)

Recent progress on catalytic co-pyrolysis of plastic waste and lignocellulosic biomass to liquid fuel: The influence of technical and reaction kinetic parameters
著者:: 2-s2.0-85100680046
出版事項: (2021)

Food waste reduction strategies in composting and recycling centers based on material flow analysis
著者:: Zahra, 等
出版事項: (2024)

Flexural and Thermo-Mechanical Properties Assessment of Nano-Silica BFRPC and GFRPC
著者:: Muslim M.A.; Jumahat A.; Abdullah S.A.; Kamaruzzaman F.; Haris N.A.; Jaafar M.A.; Loy R.S.T.
出版事項: (2024)

Plastic pollution and degradation pathways: A review on the treatment technologies
著者:: 2-s2.0-85189521739
出版事項: (2024)

Assessing Fnvironmental Pollution and Noise Levels at End-of-Life Vehicle Recycling Centers: A Comparative Study
著者:: Harun, 等
出版事項: (2024)

Mechanical properties of rubber vulcanizates containing Ethylene Propylene Diene Rubber waste at different types of vulcanization system
著者:: 2-s2.0-85130321256
出版事項: (2022)

Enhancement of bio-plastic using eggshells and chitosan on potato starch based
著者:: 2-s2.0-85082361559
出版事項: (2018)

Municipal Solid Waste Recycling Behavior and Its Association with Socio-demographics at Low-cost Apartments in Klang, Selangor, Malaysia
著者:: Azmin M.T.; Yatim S.R.M.; Ishak A.R.; Zaki M.A.; Samah M.A.A.; Rasdi N.W.
出版事項: (2022)

Tensile and flexural investigation on polypropylene recycling
著者:: 2-s2.0-85064384614
出版事項: (2019)

Mechanical properties of rubber vulcanizates containing Ethylene Propylene Diene Rubber waste at different types of vulcanization system
著者:: Abdul Wahab N.M.; Ahmad Khairal Anuar F.N.; Jamal S.N.; Mustafa M.S.; Samsudin D.; Syed Ismail S.N.
出版事項: (2022)

Determining key issues in life-cycle assessment of waste biorefineries
著者:: 2-s2.0-85127569491
出版事項: (2020)

Food Waste and Carbon Footprint Assessment of Eateries in Kelantan, Malaysia
著者:: 2-s2.0-85142042549
出版事項: (2022)

Antimicrobial potential of plastic films incorporated with sage extract on chicken meat
著者:: Aziman N.; Jawaid M.; Mutalib N.A.A.; Yusof N.L.; Nadrah A.H.; Nazatul U.K.; Tverezovskiy V.V.; Tverezovskaya O.A.; Fouad H.; Braganca R.M.; Baker P.W.; Selbie S.; Ali A.
出版事項: (2021)

Model-free kinetic analysis for co-pyrolysis of mixed plastic polymers with oil palm fiber
著者:: 2-s2.0-85176959484
出版事項: (2023)

Synthesis of graphene oxide-coated silver nanoparticles modified plastic of fibre optic sensor configuration
著者:: 2-s2.0-85218141222
出版事項: (2022)

Mechanical Properties of Compression Garments
著者:: 2-s2.0-85163464620
出版事項: (2023)

Enhancing the combustion characteristics of plastic pyrolytic oils by doping nanocarbon additives for alternative energy
著者:: Marlina, 等
出版事項: (2025)

Synergistic Effect Between Empty Fruit Bunch and HDPE on Products Yield and Functional Group Content in Bio-fuels Produced from Co-liquefaction Process Under Supercritical Methanol Condition
著者:: Ani A.Y.; Ali S.N.; Ibrahim N.R.; Ahmad R.; Ismail K.; Mohd Ishak M.A.
出版事項: (2024)

COMPARISON BETWEEN JOHNSON COOK’S PLASTICITY WITH DAMAGE MODEL AND ISOTROPIC HARDENING PLASTICITY WITH DUCTILE DAMAGE MODEL ON ALUMINIUM ALLOY SHEET 2024 T3 TENSILE TEST IN CORRELATING THE FINITE ELEMENT METHOD (FEM) TO THE EXPERIMENT TEST RESULT
著者:: Gunsalam H.; Abdullah A.S.; Awi M.; Aziz M.R.; Kamarudin K.-A.
出版事項: (2023)

Microclear: Green technology for treating and recycling of coloured wastewater
著者:: Ibrahim Z.; Yahya A.; Aris A.; Hakim I.; Taib M.A.; Mohamed Najib M.A.; Abdul Hamid A.B.; Umor N.A.; Said S.M.; Daud Z.; Salleh M.M.; Shahir S.; Mohamad S.E.; Kuang A.S.; Hong N.C.
出版事項: (2015)

Assessing respiratory mechanics using pressure reconstruction method in mechanically ventilated spontaneous breathing patient
著者:: Damanhuri N.S.; Chiew Y.S.; Othman N.A.; Docherty P.D.; Pretty C.G.; Shaw G.M.; Desaive T.; Chase J.G.
出版事項: (2016)

Penile strangulation as a consequence of autoerection with polyvinyl chloride plastic pipe ring: A case report and method of treatment
著者:: 2-s2.0-85052961507
出版事項: (2018)