Assessment of Mechanical Properties of Recycled HDPE and LDPE Plastic Wastes

QR رمز

Assessment of Mechanical Properties of Recycled HDPE and LDPE Plastic Wastes

Most plastic materials can be recycled, and turning them into some useful products can be one of the options in reducing environmental pollutions. In this project, High Density Polyethylene (HDPE) and Low Density Polyethylene (LDPE) were used, shredded into smaller pieces and were hot-pressed to bec...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	IOP Conference Series: Materials Science and Engineering
المؤلف الرئيسي:	2-s2.0-85097602008
التنسيق:	Conference paper
اللغة:	English
منشور في:	IOP Publishing Ltd 2020
الوصول للمادة أونلاين:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85097602008&doi=10.1088%2f1757-899X%2f957%2f1%2f012046&partnerID=40&md5=50051fa65bc69cadba20a1881f76972a

مواد مشابهة

Tensile properties of liner fabricated from the recycled food packaging plastic waste
بواسطة: 2-s2.0-85078623523
منشور في: (2019)

Characterization of Pyrolytic Oil from Different Blending Ratio of HDPE and PET Plastic Waste Through Gasification Pyrolysis Process
بواسطة: 2-s2.0-85213358003
منشور في: (2024)

Recent advances in recycling and upcycling of hazardous plastic waste: A review
بواسطة: 2-s2.0-86000457965
منشور في: (2025)

Characterization of Pyrolytic Oil from Different Blending Ratio of HDPE and PET Plastic Waste Through Gasification Pyrolysis Process
بواسطة: Masakhoh S.H.; Januri Z.; Rahman N.A.
منشور في: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
بواسطة: Seng, وآخرون
منشور في: (2024)

Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development
بواسطة: Seng T.K.; Zakaria M.S.; Nordin R.M.; Halim K.A.A.; Hayazi N.F.; Ibrahim L.H.
منشور في: (2024)

Plastic waste-to-fuel and sustainable development goals
بواسطة: 2-s2.0-85205363350
منشور في: (2024)

Co-pyrolysis of biomass and waste plastics for production of chemicals and liquid fuel: A review on the role of plastics and catalyst types
بواسطة: 2-s2.0-85141923496
منشور في: (2023)

Nanomaterials in recycled aggregates concrete applications: mechanical properties and durability. A review
بواسطة: 2-s2.0-85138256849
منشور في: (2022)

Mathematical modeling of plastic injection molding parameters to study the product quality through mechanical property evaluation
بواسطة: Venkatason K.; Sivaguru S.; Paizar A.R.; Roseley N.R.N.
منشور في: (2023)

Environmental perspectives of textile waste, environmental pollution and recycling
بواسطة: 2-s2.0-85128311675
منشور في: (2022)

Bibliometric analysis and an overview of the application of the non-precious materials for pyrolysis reaction of plastic waste
بواسطة: 2-s2.0-85149291632
منشور في: (2023)

A short review: Potential use of plastic waste as adsorbent for various pollutants
بواسطة: Abd-Aziz N.H.; Alias S.; Bashar N.A.M.; Amir A.; Abdul-Talib S.; Tay C.C.
منشور في: (2019)

Current recycling strategies and high-value utilization of waste cotton
بواسطة: 2-s2.0-85139345641
منشور في: (2023)

Particleboard from agricultural biomass and recycled wood waste: a review
بواسطة: 2-s2.0-85140798083
منشور في: (2022)

Attitude and expectation: Food waste recycling as a business opportunity in Terengganu
بواسطة: Wan Nawawi W.N.; Khalid S.A.; Ramli N.; Daud N.M.
منشور في: (2017)

Deep Learning Model for Enhancing Automated Recycling Machine with Incentive Mechanisms
بواسطة: 2-s2.0-85202952430
منشور في: (2024)

A multi-period model for reorganising urban household waste recycling networks
بواسطة: Zaharudin Z.A.; Brint A.; Genovese A.
منشور في: (2022)

Recent progress on catalytic co-pyrolysis of plastic waste and lignocellulosic biomass to liquid fuel: The influence of technical and reaction kinetic parameters
بواسطة: 2-s2.0-85100680046
منشور في: (2021)

Food waste reduction strategies in composting and recycling centers based on material flow analysis
بواسطة: Zahra, وآخرون
منشور في: (2024)

Flexural and Thermo-Mechanical Properties Assessment of Nano-Silica BFRPC and GFRPC
بواسطة: Muslim M.A.; Jumahat A.; Abdullah S.A.; Kamaruzzaman F.; Haris N.A.; Jaafar M.A.; Loy R.S.T.
منشور في: (2024)

Plastic pollution and degradation pathways: A review on the treatment technologies
بواسطة: 2-s2.0-85189521739
منشور في: (2024)

Assessing Fnvironmental Pollution and Noise Levels at End-of-Life Vehicle Recycling Centers: A Comparative Study
بواسطة: Harun, وآخرون
منشور في: (2024)

Mechanical properties of rubber vulcanizates containing Ethylene Propylene Diene Rubber waste at different types of vulcanization system
بواسطة: 2-s2.0-85130321256
منشور في: (2022)

Enhancement of bio-plastic using eggshells and chitosan on potato starch based
بواسطة: 2-s2.0-85082361559
منشور في: (2018)

Municipal Solid Waste Recycling Behavior and Its Association with Socio-demographics at Low-cost Apartments in Klang, Selangor, Malaysia
بواسطة: Azmin M.T.; Yatim S.R.M.; Ishak A.R.; Zaki M.A.; Samah M.A.A.; Rasdi N.W.
منشور في: (2022)

Tensile and flexural investigation on polypropylene recycling
بواسطة: 2-s2.0-85064384614
منشور في: (2019)

Mechanical properties of rubber vulcanizates containing Ethylene Propylene Diene Rubber waste at different types of vulcanization system
بواسطة: Abdul Wahab N.M.; Ahmad Khairal Anuar F.N.; Jamal S.N.; Mustafa M.S.; Samsudin D.; Syed Ismail S.N.
منشور في: (2022)

Determining key issues in life-cycle assessment of waste biorefineries
بواسطة: 2-s2.0-85127569491
منشور في: (2020)

Food Waste and Carbon Footprint Assessment of Eateries in Kelantan, Malaysia
بواسطة: 2-s2.0-85142042549
منشور في: (2022)

Antimicrobial potential of plastic films incorporated with sage extract on chicken meat
بواسطة: Aziman N.; Jawaid M.; Mutalib N.A.A.; Yusof N.L.; Nadrah A.H.; Nazatul U.K.; Tverezovskiy V.V.; Tverezovskaya O.A.; Fouad H.; Braganca R.M.; Baker P.W.; Selbie S.; Ali A.
منشور في: (2021)

Model-free kinetic analysis for co-pyrolysis of mixed plastic polymers with oil palm fiber
بواسطة: 2-s2.0-85176959484
منشور في: (2023)

Synthesis of graphene oxide-coated silver nanoparticles modified plastic of fibre optic sensor configuration
بواسطة: 2-s2.0-85218141222
منشور في: (2022)

Mechanical Properties of Compression Garments
بواسطة: 2-s2.0-85163464620
منشور في: (2023)

Enhancing the combustion characteristics of plastic pyrolytic oils by doping nanocarbon additives for alternative energy
بواسطة: Marlina, وآخرون
منشور في: (2025)

Synergistic Effect Between Empty Fruit Bunch and HDPE on Products Yield and Functional Group Content in Bio-fuels Produced from Co-liquefaction Process Under Supercritical Methanol Condition
بواسطة: Ani A.Y.; Ali S.N.; Ibrahim N.R.; Ahmad R.; Ismail K.; Mohd Ishak M.A.
منشور في: (2024)

COMPARISON BETWEEN JOHNSON COOK’S PLASTICITY WITH DAMAGE MODEL AND ISOTROPIC HARDENING PLASTICITY WITH DUCTILE DAMAGE MODEL ON ALUMINIUM ALLOY SHEET 2024 T3 TENSILE TEST IN CORRELATING THE FINITE ELEMENT METHOD (FEM) TO THE EXPERIMENT TEST RESULT
بواسطة: Gunsalam H.; Abdullah A.S.; Awi M.; Aziz M.R.; Kamarudin K.-A.
منشور في: (2023)

Microclear: Green technology for treating and recycling of coloured wastewater
بواسطة: Ibrahim Z.; Yahya A.; Aris A.; Hakim I.; Taib M.A.; Mohamed Najib M.A.; Abdul Hamid A.B.; Umor N.A.; Said S.M.; Daud Z.; Salleh M.M.; Shahir S.; Mohamad S.E.; Kuang A.S.; Hong N.C.
منشور في: (2015)

Assessing respiratory mechanics using pressure reconstruction method in mechanically ventilated spontaneous breathing patient
بواسطة: Damanhuri N.S.; Chiew Y.S.; Othman N.A.; Docherty P.D.; Pretty C.G.; Shaw G.M.; Desaive T.; Chase J.G.
منشور في: (2016)

Penile strangulation as a consequence of autoerection with polyvinyl chloride plastic pipe ring: A case report and method of treatment
بواسطة: 2-s2.0-85052961507
منشور في: (2018)