Measurement of CO2 Solubility in NaCl Brine Solutions at Different Temperatures and Pressures Using the Potentiometric Titration Method

The solubility of CO2 in brine is one of the trapping mechanisms by which the CO2 is sequestrated in aquifers. In this research, an unconventional method, called the potentiometric titration, was used to obtain the solubility of CO2 in distilled water and NaCl brine. The solubility data for the low...

詳細記述

書誌詳細
出版年:Journal of Chemical and Engineering Data
第一著者: 2-s2.0-84937509627
フォーマット: 論文
言語:English
出版事項: American Chemical Society 2015
オンライン・アクセス:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84937509627&doi=10.1021%2fje501172d&partnerID=40&md5=ffce4d8d0d5aa01689feb00fa18a6663
その他の書誌記述
要約:The solubility of CO2 in brine is one of the trapping mechanisms by which the CO2 is sequestrated in aquifers. In this research, an unconventional method, called the potentiometric titration, was used to obtain the solubility of CO2 in distilled water and NaCl brine. The solubility data for the low salinity range are scarce in the literature. Thus, in this research, the CO2 solubility was obtained in NaCl brines of low salinity (0-15000 ppm) at temperatures between 60 °C and 100 °C and pressures up to 25 MPa. Moreover, the salting-out effect was estimated using the Setchenov's constant as a measure of reduction in solubility when salt is added to the solution. The solubility points obtained by the potentiometric titration method demonstrated very good consistency with those obtained by the previous methods. © 2015 American Chemical Society.
ISSN:219568
DOI:10.1021/je501172d