Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method

QR Code

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method

Today, 3D printing equipment is reasonably priced and widely available. This allows for the design creation of more complex structures for aerospace applications, especially for the unmanned aerial vehicle (UAV). In this study, a simulated 3D-printed airframe has been evaluated for use with a blende...

書目詳細資料
發表在:	Journal of Aeronautics, Astronautics and Aviation
主要作者:	2-s2.0-85132112562
格式:	Article
語言:	English
出版:	The Aeronautical and Astronautical Society of the Republic of China 2022
在線閱讀:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85132112562&doi=10.6125%2fJoAAA.202209_54%283%29.10&partnerID=40&md5=07a7f87cab17385d83f9b4af7412f912

相似書籍

Finite element-based fatigue life prediction of a load-carrying cruciform joint
由: 2-s2.0-84938634562
出版: (2015)

A Study of 3D Printed Box Structure
由: 2-s2.0-85104174597
出版: (2021)

Biomechanical Evaluation of Three-Dimensional Printed Leg Orthosis for Ankle Fixation: Finite Element and Thermal Analysis
由: Mohd Salaha Z.F.; Jauhari Efendie S.N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版: (2024)

Determining hyperelastic parameters of human skin using 2D finite element modelling and simulation
由: 2-s2.0-84867919926
出版: (2012)

TOPOLOGY OPTIMIZATION AND MECHANICAL PROPERTIES STUDIES ON TOTAL KNEE REPLACEMENT (TKR) USING FINITE ELEMENT SIMULATION METHOD
由: Manap M.F.A.; Zainuddin P.N.B.; Ismail N.F.; Zubair A.F.; Halidi S.N.A.; Ismail H.
出版: (2023)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
由: ATAN M.K.F.M.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; GUNAWAN T.S.; ZAIN Z.M.
出版: (2025)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
由: Atan, et al.
出版: (2025)

Finite element model updating on structural components of simplified model of aircraft pylon
由: Bahari A.R.; Yunus M.A.; Rani M.N.A.; Shah M.A.S.A.; Mirza W.I.I.W.I.
出版: (2022)

Crash Investigation on Frontal Vehicle Chassis Frame using Finite Element Simulation
由: 2-s2.0-85141464799
出版: (2022)

AI 2D-3D Generation in Architectural Design: A Divine Hand or a Pandora's Box
由: 2-s2.0-85219511098
出版: (2024)

Comparison between static and dynamic laboratory compaction methods
由: 2-s2.0-79251553452
出版: (2010)

A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant
由: Al-Tam B.Y.; Ramlee M.H.; Wahab A.A.; Seng G.H.; Abdullah A.H.
出版: (2023)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
由: Hanipah S.H.; C. Hassan N.F.N.; Talib A.T.; P Mohammed M.A.; Wakisaka M.; Abdullah Z.
出版: (2025)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
由: Hanipah, et al.
出版: (2025)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
由: 2-s2.0-85189024462
出版: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
由: Shahar, et al.
出版: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
由: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
出版: (2025)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
由: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
出版: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
由: 2-s2.0-85215705046
出版: (2025)

Ergonomics intervention in assembling air handler panels
由: 2-s2.0-84886303994
出版: (2013)

Contact stiffness parameters of soil particles model for discrete element modeling using static packing pressure test
由: 2-s2.0-85055467752
出版: (2018)

Natural Frequencies Prediction of Hybrid Composite Laminate based on Finite Element Simulation and Artificial Neural Network
由: 2-s2.0-85219506859
出版: (2024)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
由: 2-s2.0-85170094598
出版: (2023)

A review on behavior, material properties and finite element simulation of concrete tunnel linings under fire
由: 2-s2.0-85129768015
出版: (2022)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
由: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
出版: (2022)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
由: 2-s2.0-85122086227
出版: (2022)

Dry thermotropic glycolipid self-assembly: A review
由: 2-s2.0-85048027256
出版: (2018)

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study
由: 2-s2.0-85148865825
出版: (2023)

Development of Ophthalmology Eye Examination Device using 3D Printing Technology
由: Abdullah A.H.; Alimarizan F.; Aziz N.A.A.; Hazwani F.; Marwan S.H.
出版: (2024)

THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS
由: Maideen N.C.; Nazri M.H.; Budin S.; Hyie K.M.; Yusoff H.; Sahudin S.
出版: (2023)

Development and future prospects of 3D printed surimi products: A review
由: Diao D.; Yang R.; Liu Y.; Zhao Y.; Chen M.; Chen Y.; Zheng B.; Khong H.Y.
出版: (2025)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
由: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
出版: (2023)

Development and future prospects of 3D printed surimi products: A review
由: Diao, et al.
出版: (2025)

Plant oil body as an effective improver for surimi-based 3D printing
由: 2-s2.0-85204039180
出版: (2024)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
由: 2-s2.0-85166774849
出版: (2023)

Stochastic study on dynamic behaviour of bolted joint structure
由: Shah M.A.S.A.; Yunus M.A.; Rani M.N.A.; Yahya Z.
出版: (2022)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
由: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
出版: (2024)

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure
由: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Nazeri M.N.; Shuib S.
出版: (2024)

Optimization of Spot Weld Joining Parameters for Dissimilar Plate Materials through Finite Element Model Updating and Response Surface Methodology
由: 2-s2.0-85213279061
出版: (2024)

Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model
由: 2-s2.0-85159289861
出版: (2023)