Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method

QRコード

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method

Today, 3D printing equipment is reasonably priced and widely available. This allows for the design creation of more complex structures for aerospace applications, especially for the unmanned aerial vehicle (UAV). In this study, a simulated 3D-printed airframe has been evaluated for use with a blende...

書誌詳細
出版年:	Journal of Aeronautics, Astronautics and Aviation
第一著者:	2-s2.0-85132112562
フォーマット:	論文
言語:	English
出版事項:	The Aeronautical and Astronautical Society of the Republic of China 2022
オンライン･アクセス:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85132112562&doi=10.6125%2fJoAAA.202209_54%283%29.10&partnerID=40&md5=07a7f87cab17385d83f9b4af7412f912

類似資料

Finite element-based fatigue life prediction of a load-carrying cruciform joint
著者:: 2-s2.0-84938634562
出版事項: (2015)

A Study of 3D Printed Box Structure
著者:: 2-s2.0-85104174597
出版事項: (2021)

Biomechanical Evaluation of Three-Dimensional Printed Leg Orthosis for Ankle Fixation: Finite Element and Thermal Analysis
著者:: Mohd Salaha Z.F.; Jauhari Efendie S.N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版事項: (2024)

Determining hyperelastic parameters of human skin using 2D finite element modelling and simulation
著者:: 2-s2.0-84867919926
出版事項: (2012)

TOPOLOGY OPTIMIZATION AND MECHANICAL PROPERTIES STUDIES ON TOTAL KNEE REPLACEMENT (TKR) USING FINITE ELEMENT SIMULATION METHOD
著者:: Manap M.F.A.; Zainuddin P.N.B.; Ismail N.F.; Zubair A.F.; Halidi S.N.A.; Ismail H.
出版事項: (2023)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
著者:: ATAN M.K.F.M.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; GUNAWAN T.S.; ZAIN Z.M.
出版事項: (2025)

DEVELOPMENT OF 3D PRINTED SERPENTINE FLUIDIC CHANNEL INTEGRATED WITH HEATING ELEMENT FOR LOOP-MEDIATED ISOTHERMAL AMPLIFICATION (LAMP) PROCESS
著者:: Atan, 等
出版事項: (2025)

Finite element model updating on structural components of simplified model of aircraft pylon
著者:: Bahari A.R.; Yunus M.A.; Rani M.N.A.; Shah M.A.S.A.; Mirza W.I.I.W.I.
出版事項: (2022)

Crash Investigation on Frontal Vehicle Chassis Frame using Finite Element Simulation
著者:: 2-s2.0-85141464799
出版事項: (2022)

AI 2D-3D Generation in Architectural Design: A Divine Hand or a Pandora's Box
著者:: 2-s2.0-85219511098
出版事項: (2024)

Comparison between static and dynamic laboratory compaction methods
著者:: 2-s2.0-79251553452
出版事項: (2010)

A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant
著者:: Al-Tam B.Y.; Ramlee M.H.; Wahab A.A.; Seng G.H.; Abdullah A.H.
出版事項: (2023)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
著者:: Hanipah S.H.; C. Hassan N.F.N.; Talib A.T.; P Mohammed M.A.; Wakisaka M.; Abdullah Z.
出版事項: (2025)

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
著者:: Hanipah, 等
出版事項: (2025)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
著者:: 2-s2.0-85189024462
出版事項: (2024)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
著者:: Shahar, 等
出版事項: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
著者:: Shukri A.Y.M.; Abdullah A.M.; Shuib S.; Mohamad D.
出版事項: (2025)

Harnessing the Potential of Natural Composites in Biomedical 3D Printing
著者:: Shahar F.S.; Sultan M.T.H.; Grzejda R.; Łukaszewicz A.; Oksiuta Z.; Krishnamoorthy R.R.
出版事項: (2024)

Preparation and Characterization of PLA Filaments for FDM 3D Printing
著者:: 2-s2.0-85215705046
出版事項: (2025)

Ergonomics intervention in assembling air handler panels
著者:: 2-s2.0-84886303994
出版事項: (2013)

Contact stiffness parameters of soil particles model for discrete element modeling using static packing pressure test
著者:: 2-s2.0-85055467752
出版事項: (2018)

Natural Frequencies Prediction of Hybrid Composite Laminate based on Finite Element Simulation and Artificial Neural Network
著者:: 2-s2.0-85219506859
出版事項: (2024)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
著者:: 2-s2.0-85170094598
出版事項: (2023)

A review on behavior, material properties and finite element simulation of concrete tunnel linings under fire
著者:: 2-s2.0-85129768015
出版事項: (2022)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
著者:: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
出版事項: (2022)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
著者:: 2-s2.0-85122086227
出版事項: (2022)

Dry thermotropic glycolipid self-assembly: A review
著者:: 2-s2.0-85048027256
出版事項: (2018)

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study
著者:: 2-s2.0-85148865825
出版事項: (2023)

Development of Ophthalmology Eye Examination Device using 3D Printing Technology
著者:: Abdullah A.H.; Alimarizan F.; Aziz N.A.A.; Hazwani F.; Marwan S.H.
出版事項: (2024)

THE EFFECT OF DIFFERENT SLICING SOFTWARE ON THE MANUFACTURING PERFORMANCE OF 3D PRINTED PARTS
著者:: Maideen N.C.; Nazri M.H.; Budin S.; Hyie K.M.; Yusoff H.; Sahudin S.
出版事項: (2023)

Development and future prospects of 3D printed surimi products: A review
著者:: Diao D.; Yang R.; Liu Y.; Zhao Y.; Chen M.; Chen Y.; Zheng B.; Khong H.Y.
出版事項: (2025)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
著者:: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
出版事項: (2023)

Development and future prospects of 3D printed surimi products: A review
著者:: Diao, 等
出版事項: (2025)

Plant oil body as an effective improver for surimi-based 3D printing
著者:: 2-s2.0-85204039180
出版事項: (2024)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
著者:: 2-s2.0-85166774849
出版事項: (2023)

Stochastic study on dynamic behaviour of bolted joint structure
著者:: Shah M.A.S.A.; Yunus M.A.; Rani M.N.A.; Yahya Z.
出版事項: (2022)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
著者:: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
出版事項: (2024)

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure
著者:: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Nazeri M.N.; Shuib S.
出版事項: (2024)

Optimization of Spot Weld Joining Parameters for Dissimilar Plate Materials through Finite Element Model Updating and Response Surface Methodology
著者:: 2-s2.0-85213279061
出版事項: (2024)

Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model
著者:: 2-s2.0-85159289861
出版事項: (2023)