FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES

QR رمز

FRACTOGRAPHY OF WASPALOY WIRE DEPOSITED WITH LASER AND ARC ADDITIVE MANUFACTURING PROCESSES

Welding with filler material can be considered as an additive manufacturing process whereby it involves the deposition of molten metal in a form of droplets onto a substrate. Wire and Arc Additive Manufacturing (WAAM) and laser direct metal deposition (DMD) are applied for repair purposes, hard faci...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	Journal of Advanced Manufacturing Technology
المؤلف الرئيسي:	2-s2.0-85149545468
التنسيق:	مقال
اللغة:	English
منشور في:	Penerbit Universiti Teknikal Malaysia Melaka 2022
الوصول للمادة أونلاين:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85149545468&partnerID=40&md5=379e0f3ba2ecaf43cf2cbc17070251a0

مواد مشابهة

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
بواسطة: 2-s2.0-85189668193
منشور في: (2024)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
بواسطة: Mohd Mansor M.S.; Raja S.; Yusof F.; Muhamad M.R.; Manurung Y.H.; Adenan M.S.; Hussein N.I.S.; Ren J.
منشور في: (2024)

Research challenges, quality control and monitoring strategy for Wire Arc Additive Manufacturing
بواسطة: 2-s2.0-85151789154
منشور في: (2023)

Effect of Copper Addition on the Properties of TiO2 Coatings Deposited by Air Plasma Spray Process
بواسطة: Rahim T.A.; Amir N.I.A.B.; Mohamad N.; Dom A.H.M.; Omar N.I.; Yusuf Y.; Bakar I.A.A.; Juoi J.M.
منشور في: (2023)

The effect of Gas Metal Arc Welding (GMAW) processes on different welding parameters
بواسطة: 2-s2.0-84901055998
منشور في: (2012)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
بواسطة: 2-s2.0-85215661119
منشور في: (2025)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
بواسطة: 2-s2.0-85166774849
منشور في: (2023)

Distortion Behaviour Analysis of Additively Manufactured Inconel 718 using Numerical Computation
بواسطة: Rahman A.R.A.; Muhammad N.A.; Mat M.F.; Manurung Y.H.P.; Adenan M.S.; Busari Y.O.; Prajadhiana K.P.; Ginta T.L.; Triyono
منشور في: (2025)

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition
بواسطة: 2-s2.0-85202815409
منشور في: (2024)

Activated electric arc furnace slag as an efficient and reusable heterogeneous Fenton-like catalyst for the degradation of Reactive Black 5
بواسطة: 2-s2.0-84994513762
منشور في: (2016)

Multi-objective optimization in wire-electrical discharge machining (WEDM) of titanium alloy
بواسطة: Saedon J.B.; Jaafar N.; Nor N.H.M.; Yahaya M.A.; Husain H.
منشور في: (2015)

Design of Multiwavelength EDF-Raman Lasers Utilizing Mach-Zehnder Interferometer
بواسطة: 2-s2.0-85125597580
منشور في: (2021)

Study on depth penetration of molars teeth using carbon dioxide laser
بواسطة: 2-s2.0-84855894846
منشور في: (2011)

Ergonomics as a lean manufacturing tool for improvements in a manufacturing company
بواسطة: 2-s2.0-85018440148
منشور في: (2016)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
بواسطة: 2-s2.0-85213080147
منشور في: (2023)

Indoor flow datasets of two-layered cross-ventilation models by particle image velocimetry and hot wire anemometry
بواسطة: 2-s2.0-85178589629
منشور في: (2024)

Investigation on CR, MRR and SR of wire electrical discharge machining (WEDM) on high carbon steel S50C
بواسطة: 2-s2.0-84943270190
منشور في: (2015)

The effect of deposition time on the morphology of CuS electrodes fabricated by chemical bath deposition for supercapacitor applications
بواسطة: Abdullah H.; Sundararaj M.; Selvanathan V.; Naim N.M.; Akhtaruzzaman M.; Othman M.H.D.; Yap W.F.; Mohmad A.R.; Azman N.J.; Ahmad M.F.; Sampe J.; Yuliarto B.
منشور في: (2024)

Deposition of fine iron oxide particles in tap water using electrophoretic deposition (EPD) technique
بواسطة: Mohd Sharif S.; Abu Bakar N.F.; Naim M.
منشور في: (2015)

Board diversity and firm value: A study on Malaysian listed firms in manufacturing and non-manufacturing sectors
بواسطة: 2-s2.0-85169686474
منشور في: (2023)

Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications
بواسطة: 2-s2.0-84863725211
منشور في: (2012)

THE EFFECT OF CO2 LASER ENGRAVE PARAMETERS ON SURFACE ROUGHNESS ON POLYMETHYLMETHACRYLATE (PMMA)
بواسطة: Isnin N.S.; Nasir S.M.F.S.A.; Hemdi A.R.; Ismail H.; Yusoff H.; Nurmalasari R.
منشور في: (2023)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
بواسطة: HISHAM B.N.B.; RAHIM R.A.; NORDIN A.N.; RALIB A.A.M.; ZA'BAH N.F.; TUNG L.H.; ZAIN Z.M.
منشور في: (2025)

ELECTROCHEMICAL SENSING OF NICOTINE USING LASER-INDUCED GRAPHENE SCREEN PRINTED ELECTRODE
بواسطة: Hisham, وآخرون
منشور في: (2025)

Surface morphology study on effect of deposition temperature on nanostructured zinc oxide by chemical vapour deposition method
بواسطة: Khusaimi Z.; Ghani N.A.; Noor F.W.M.; Amizam S.; Rafaie H.A.; Mamat M.H.; Sahdan M.Z.; Abdullah N.; Abdullah S.; Rusop M.
منشور في: (2009)

Structural, optical and electrical properties of ZnO/Zn 2 GeO 4 porous-like thin film and wires
بواسطة: 2-s2.0-79951682791
منشور في: (2011)

High-temperature mechanical properties investigation of Al-6.5 % Cu gas tungsten arc welds made with scandium modified 2319 filler
بواسطة: Babu N.K.; Talari M.K.; Pan D.; Wei J.
منشور في: (2013)

Ultrafast laser plasma doping of Er3+ in Si3N4-on-silicon
بواسطة: Kamil S.A.; Chandrappan J.; Krauss T.F.; Jose G.
منشور في: (2019)

Mode-locked erbium-doped fiber laser based on Cr2GaC saturable absorber
بواسطة: 2-s2.0-85195815563
منشور في: (2024)

Blue laser imaging, blue light imaging, and linked color imaging for the detection and characterization of colorectal tumors
بواسطة: 2-s2.0-85063370300
منشور في: (2019)

Anodized TiO2 nanotubes using Ti wire in fluorinated ethylene glycol with air bubbles for removal of methylene blue dye
بواسطة: 2-s2.0-85119297495
منشور في: (2022)

A review of key principles in halal manufacturing
بواسطة: 2-s2.0-85008191023
منشور في: (2016)

Modal parameters of a laser spot welded structure using wave-based substructuring scheme
بواسطة: Basri A.B.A.; Febrina R.; Afriani L.; Rani M.N.A.; Yunus M.A.; Mirza W.I.I.W.I.; Shah M.A.S.A.
منشور في: (2022)

ELUCIDATING THE EFFECTS OF NEODYMIUM NANOPARTICLES ON JUDD-OFELT AND OPTICAL PARAMETERS OF ZINCTELLURITE GLASS FOR FIBER LASERS
بواسطة: Azlan, وآخرون
منشور في: (2024)

Influence of machine feed rate in WEDM of Titanium Ti-6Al-4V with constant current (6A) using brass wire
بواسطة: 2-s2.0-84901048392
منشور في: (2012)

Microstructure evolution and mechanical properties investigation of Al-6 %Cu alloy laser and GTA welds; [Untersuchung der Mikrostrukturentwicklung und der mechanischen Eigenschaften von Laser- und WIG-Schweißnähten einer Al-6%Cu-Legierung]
بواسطة: Talari M.K.; Kishore Babu N.
منشور في: (2013)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
بواسطة: 2-s2.0-84971469649
منشور في: (2016)

Lean Manufacturing and Industry 4.0: Unveiling Trends, Applications, and Global Impacts in Manufacturing Through Comprehensive Literature Review
بواسطة: Azian, وآخرون
منشور في: (2025)

Characteristics of ultrafine particle sources and deposition rates in primary school classrooms
بواسطة: 2-s2.0-84900803036
منشور في: (2014)

Design of an enhanced feature point matching algorithm utilizing 3D laser scanning technology for sculpture design
بواسطة: Zheng X.; Weng Z.
منشور في: (2025)