Permeation of Chlorinated Hydrocarbon Vapors through High Density Polyethylene/Ethylene Propylene Diene Terpolymer Rubber Blends

Polymer membranes were prepared by blending high density polyethylene (HDPE) with ethylene propylene diene terpolymer rubber (EPDM) and were tested for vapor permeation characteristics. The variation in sorption, diffusion, and permeation coefficients with blend composition has been studied and it w...

全面介绍

书目详细资料
发表在:Separation Science and Technology
主要作者: 2-s2.0-84860142920
格式: 文件
语言:English
出版: 2012
在线阅读:https://www.scopus.com/inward/record.uri?eid=2-s2.0-84860142920&doi=10.1080%2f01496395.2011.630053&partnerID=40&md5=65cd3964e2051945345fd8c8b5b7ef0a
实物特征
总结:Polymer membranes were prepared by blending high density polyethylene (HDPE) with ethylene propylene diene terpolymer rubber (EPDM) and were tested for vapor permeation characteristics. The variation in sorption, diffusion, and permeation coefficients with blend composition has been studied and it was found that in these blends the permeability coefficient and sorption coefficients increased with increase in EPDM concentration. The permeation rate decreased with the increase in molecular mass of the penetrants. The permeability of the HDPE/EPDM blends vulcanized with three different vulcanizing systems has been studied and found that as the degree of crosslinking increases, the permeability decreases. The permeability measurements provide useful information on the morphology changes with composition of the blends and on the composition corresponding to the maximum level of co-continuity of the two phases. © 2012 Copyright Taylor and Francis Group, LLC.
ISSN:15205754
DOI:10.1080/01496395.2011.630053