Virtual model of kenaf bast fibres based on solid mechanics and finite element study

QR Code

Virtual model of kenaf bast fibres based on solid mechanics and finite element study

Kenaf fibres are gaining traction as a promising eco-friendly material due to their renewability and impressive mechanical strength. This study explored kenaf's potential to replace traditional materials by investigating its microstructure using advanced techniques like Scanning Electron Micros...

書目詳細資料
發表在:	Biosystems Engineering
主要作者:	Hanipah S.H.; C. Hassan N.F.N.; Talib A.T.; P Mohammed M.A.; Wakisaka M.; Abdullah Z.
格式:	Article
語言:	English
出版:	Academic Press 2025
在線閱讀:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85216577765&doi=10.1016%2fj.biosystemseng.2025.01.013&partnerID=40&md5=fd0a285c74a296441a2e0957c809be60

相似書籍

Virtual model of kenaf bast fibres based on solid mechanics and finite element study
由: Hanipah, et al.
出版: (2025)

Isothermal crystallization kinetics and mechanical properties of PLA/Kenaf biocomposite: Comparison between alkali treated kenaf core and bast reinforcement
由: 2-s2.0-85129309927
出版: (2022)

Retting process of some bast plant fibres and its effect on fibre quality: A review
由: 2-s2.0-84856415290
出版: (2011)

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure
由: Owen M.M.; Wong L.S.; Achukwu E.O.; Romli A.Z.; Nazeri M.N.; Shuib S.
出版: (2024)

The Effect of Polysulfone-nanosilica Coating on Mechanical Properties of Kenaf Fibre-Reinforced Polymer Composites
由: Azhar, et al.
出版: (2024)

Effect of silane treatments on mechanical performance of kenaf fibre reinforced polymer composites: a review
由: 2-s2.0-85122545487
出版: (2021)

TOPOLOGY OPTIMIZATION AND MECHANICAL PROPERTIES STUDIES ON TOTAL KNEE REPLACEMENT (TKR) USING FINITE ELEMENT SIMULATION METHOD
由: Manap M.F.A.; Zainuddin P.N.B.; Ismail N.F.; Zubair A.F.; Halidi S.N.A.; Ismail H.
出版: (2023)

Effect of MWCNT surface functionalisation and distribution on compressive properties of kenaf and hybrid kenaf/glass fibres reinforced polymer composites
由: 2-s2.0-85094556985
出版: (2020)

A Review on Finite Element Modelling and Simulation for Upper Limb of Human Bone and Implant
由: Al-Tam B.Y.; Ramlee M.H.; Wahab A.A.; Seng G.H.; Abdullah A.H.
出版: (2023)

Finite element model updating on structural components of simplified model of aircraft pylon
由: Bahari A.R.; Yunus M.A.; Rani M.N.A.; Shah M.A.S.A.; Mirza W.I.I.W.I.
出版: (2022)

Biomechanical Evaluation of Three-Dimensional Printed Leg Orthosis for Ankle Fixation: Finite Element and Thermal Analysis
由: Mohd Salaha Z.F.; Jauhari Efendie S.N.; Abd Samad M.I.; Hanif Baharuddin M.; Halim Abdullah A.; Hanif Ramlee M.
出版: (2024)

Investigation of the effect of Berkovich and Cube Corner indentations on the mechanical behavior of fused silica using molecular dynamics and finite element simulation
由: 2-s2.0-85121742138
出版: (2022)

Crash Investigation on Frontal Vehicle Chassis Frame using Finite Element Simulation
由: 2-s2.0-85141464799
出版: (2022)

Finite element-based fatigue life prediction of a load-carrying cruciform joint
由: 2-s2.0-84938634562
出版: (2015)

Determining hyperelastic parameters of human skin using 2D finite element modelling and simulation
由: 2-s2.0-84867919926
出版: (2012)

Properties of kenaf/textile waste fibre hybridisation in a carbon nanotubes modified matrix; [Eigenschaften der Kenaf/Textil-Abfallfaser-Hybridisierung in einer Kohlenstoff-Nanoröhrchen-modifizierten Matrix]
由: 2-s2.0-85126475914
出版: (2022)

Dynamic mechanical analysis of arenga pinnata fibre reinforced epoxy composites: Effects of fibre aging
由: Abdullah A.H.; Jamaludin A.H.B.
出版: (2015)

Natural Frequencies Prediction of Hybrid Composite Laminate based on Finite Element Simulation and Artificial Neural Network
由: 2-s2.0-85219506859
出版: (2024)

Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile
由: 2-s2.0-85170094598
出版: (2023)

A review on behavior, material properties and finite element simulation of concrete tunnel linings under fire
由: 2-s2.0-85129768015
出版: (2022)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
由: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
出版: (2024)

Structural Integrity of Anterior Ceramic Resin-Bonded Fixed Partial Denture: A Finite Element Analysis Study
由: 2-s2.0-85148865825
出版: (2023)

Evaluation of physical, mechanical, and thermal properties of woven kenaf/bio-epoxy composites
由: Abare A.Y.; Jawaid M.; Hamid N.H.; Bakar B.F.A.; Ismail A.S.; Sarmin S.N.; Fouad H.; Midani M.
出版: (2023)

Static Analysis of 3D-Printed Sub Wing Box Lug Joint Assembly using Finite Element Method
由: 2-s2.0-85132112562
出版: (2022)

Single passage CFD analysis for non radial fibre element of low pressure turbine
由: Ahmad B.; Fattah A.; Bin Mamat A.M.I.
出版: (2015)

Optimization of Spot Weld Joining Parameters for Dissimilar Plate Materials through Finite Element Model Updating and Response Surface Methodology
由: 2-s2.0-85213279061
出版: (2024)

Biomechanical Effects of the Porous Structure of Gyroid and Voronoi Hip Implants: A Finite Element Analysis Using an Experimentally Validated Model
由: 2-s2.0-85159289861
出版: (2023)

Operational modal analysis and finite element model updating of ultra-high-performance concrete bridge based on ambient vibration test
由: 2-s2.0-85129912488
出版: (2022)

Virtual is Vital: The Strategies, Design, and Attendee Engagement of Virtual Events
由: 2-s2.0-85125917346
出版: (2021)

Mechanical, Thermal and Morphological Properties of Woven Kenaf Fiber Reinforced Polylactic Acid (PLA) Composites
由: Nor M.A.M.; Sapuan S.M.; Yusoff M.Z.M.; Zainudin E.S.
出版: (2022)

Policy gaps in the virtual world
由: Annamalai M.; Ehsan K.M.; Awang N.S.N.; Ahmad N.A.I.N.
出版: (2010)

Kenaf/glass fiber-reinforced polymer composites: Pioneering sustainable materials with enhanced mechanical and tribological properties
由: 2-s2.0-85199441382
出版: (2024)

Tensile and flexural properties of silica nanoparticles modified unidirectional kenaf and hybrid glass/kenaf epoxy composites
由: 2-s2.0-85096214073
出版: (2020)

Morphology and elemental composition of cerate-zirconate compound as-prepared by a sol-gel technique
由: Osman N.; Abdullah N.A.; Ibarahim N.A.; Hassan O.H.
出版: (2015)

COMPARISON BETWEEN JOHNSON COOK’S PLASTICITY WITH DAMAGE MODEL AND ISOTROPIC HARDENING PLASTICITY WITH DUCTILE DAMAGE MODEL ON ALUMINIUM ALLOY SHEET 2024 T3 TENSILE TEST IN CORRELATING THE FINITE ELEMENT METHOD (FEM) TO THE EXPERIMENT TEST RESULT
由: Gunsalam H.; Abdullah A.S.; Awi M.; Aziz M.R.; Kamarudin K.-A.
出版: (2023)

A review of recent developments in natural fibre composites and their mechanical performance
由: Pickering K.L.; Efendy M.G.A.; Le T.M.
出版: (2016)

A review of recent developments in natural fibre composites and their mechanical performance
由: 2-s2.0-84958852244
出版: (2016)

Students’ engagement in a hybrid classroom: a comparison between face-to-face and virtual environments
由: Teoh S.H.; Boon Zik Hong J.; Md Shamsudin N.; Singh P.; Hartono R.
出版: (2025)

Mechanical Properties of Mortar with Low-Density Polyethylene as Sand Replacement and Steel Fibre Additive
由: Tuan Lokman T.N.L.; Hooi Min Y.; Ahmad Zailani W.W.; Senin S.F.; Hwa C.C.; Yeol K.J.
出版: (2025)

The role of shear viscosity as a biomarker for improving chronic kidney disease detection using shear wave elastography: A computational study using a validated finite element model
由: 2-s2.0-85160299232
出版: (2023)