Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting

QR رمز

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting

This work presents experimental and numerical results of deposition of SiC coating using TIG torch method. The Taguchi approach was used to optimize the TIG torch melting process of duplex stainless steel for increasing the wear properties. The process variables used are current, voltage, transverse...

وصف كامل

التفاصيل البيبلوغرافية
الحاوية / القاعدة:	International Journal of Nanoelectronics and Materials
المؤلف الرئيسي:	Paijan L.H.; Maleque M.A.; Rosli Z.M.; Abdollah M.F.; Mamat M.F.; Idriss A.N.M.
التنسيق:	مقال
اللغة:	English
منشور في:	Universiti Malaysia Perlis 2024
الوصول للمادة أونلاين:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85214675206&doi=10.58915%2fijneam.v17iDecember.1605&partnerID=40&md5=1d8e112f1632317acd51bf26628507fd

مواد مشابهة

Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting
بواسطة: Paijan, وآخرون
منشور في: (2024)

Effect of Temperature Variation on Wear Behaviour of Austenitic Stainless Steel
بواسطة: 2-s2.0-85012271921
منشور في: (2016)

Silicon carbide formation from natural woods
بواسطة: Hyie K.M.; Muda S.S.; Elias H.M.; Rahman N.L.A.; Kalam A.
منشور في: (2015)

Wear mechanisms of coated tungsten carbide when machining inconel 718 under cryogenic and dry conditions
بواسطة: 2-s2.0-85082317767
منشور في: (2019)

Experimental Analysis on Grain Growth Kinetics of SS316L Austenitic Stainless Steel
بواسطة: Mat M.F.; Manurung Y.H.P.; Busari Y.O.; Adenan M.S.; Sulaiman M.S.; Muhammad N.; Mekanikal J.K.; Graf M.
منشور في: (2021)

Predicting The Melting Temperature Of Polymers Using Machine Learning
بواسطة: Fatriansyah J.F.; Mahardi H.L.; Rizky M.A.Y.; Surya R.D.; Federico A.; Surip S.N.
منشور في: (2024)

Response surface based model updating of TIG welded structure of hollow structural section (HSS) column
بواسطة: Shah M.A.S.A.; Yunus M.A.; Rani M.N.A.
منشور في: (2022)

Ad-Hoc network design with multiple metrics using Taguchi's loss function
بواسطة: Mohamed H.; Lee M.H.; Salleh S.; Sanugi B.; Sarahintu M.
منشور في: (2011)

Exploring the physical behavior of surface-functionalized two-dimensional Tungsten carbide/nitride MXenes
بواسطة: Ul Haq B.; Kim S.-H.; Ahmed R.; Taib M.F.M.; Rasool Chaudhry A.; Seddik T.; Laref A.
منشور في: (2024)

Mechanical Response and Failure Analysis of Stainless-Steel Beams Exposed to Elevated Temperatures
بواسطة: Hazizan N.A.; Wahid N.; Zakwan F.A.A.; Ismail R.; Hashim M.H.M.; Ahmad H.; Goh L.D.
منشور في: (2024)

Taste Masking Study of Cocoa Butter Fast Melt Tablet (FMT) Formulations Containing Memantine Hydrochloride
بواسطة: Liew K.B.; Chew Y.L.; Helal Uddin A.B.M.; Lee S.-K.; Lakshminarayanan V.; Janakiraman A.K.; Khalid S.H.; Ramanunny A.K.; Xia Y.
منشور في: (2024)

Synthesis of hybrid organic-inorganic hydrotalcite-like materials intercalated with duplex herbicides: The characterization and simultaneous release properties
بواسطة: 2-s2.0-85113537637
منشور في: (2021)

Effects of refrigerated air on tool wear
بواسطة: Gisip J.; Gazo R.; Stewart H.A.
منشور في: (2007)

Performance of Carbide Lime Waste Mortar via 24 Hours Accelerated CO2 Curing
بواسطة: Talip A.R.A.; Khalid N.H.A.; sam A.R.M.; Joudah Z.H.; Othman R.
منشور في: (2024)

Optimization of the preparation of palm kernel shell–derived activated carbon via Taguchi method for enhanced methylene blue removal
بواسطة: Zaini M.S.M.; Roslan S.Z.; Za’aim M.A.M.; Syed-Hassan S.S.A.
منشور في: (2025)

Design Modification and Finite Element Analysis of Stainless Steel 316L Locking Compression Plates for Mid-Transverse Fractures
بواسطة: Nazeri M.N.B.; Shuib S.; Romli A.Z.; Miswan M.F.M.
منشور في: (2024)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
بواسطة: Rajendran R.C.; Anto T.; Agarwal A.; Ilunga M.; Jayamani E.; Natarajan V.D.
منشور في: (2024)

Exploring the reinforcing mechanism and micromechanical models for the interphase characteristics in melt mixed XLPE-fumed SiO2 nanocomposites
بواسطة: 2-s2.0-85127287523
منشور في: (2022)

Techniques of Direct Composite Build Ups in Managing Tooth Wear Cases: A Narrative Review
بواسطة: Lim G.S.; Lee W.M.; Foo K.R.
منشور في: (2024)

Optimisation of Palm Kernel Shell Activated Carbon for Carbon Dioxide Adsorption: Taguchi Approach
بواسطة: 2-s2.0-85163806127
منشور في: (2023)

ASSESSMENT OF TOOL NOSE WEAR USING SCANNED IMAGES OF CUTTING INSERTS
بواسطة: Lim T.Y.; Chiang E.P.; Woo Y.P.
منشور في: (2024)

Abrasive wear behavior of CNT-filled unidirectional kenaf-epoxy composites
بواسطة: 2-s2.0-85100480188
منشور في: (2021)

Optimization of Design Parameters using Taguchi Method for Thermal Stress Analysis in a 3D IC
بواسطة: Bin Sazali, وآخرون
منشور في: (2024)

A methodology for facial measurement towards the establishment of ready-to-wear hijab sizing
بواسطة: 2-s2.0-84994399987
منشور في: (2016)

Materials Synthesis and Characterization of Nano-Titanium Carbide-Filled Acrylonitrile Butadiene-Styrene Polymer Composites for Electromagnetic Interference Shielding
بواسطة: Rajendran, وآخرون
منشور في: (2024)

Photocatalytic degradation of methyl green dye by nitrogen-doped carbon quantum dots: Optimisation study by Taguchi approach
بواسطة: Abd Rani U.; Ng L.Y.; Ng Y.S.; Ng C.Y.; Ong Y.H.; Lim Y.P.
منشور في: (2022)

Effect of die and punch radius on springback of stainless steel sheet metal in the air V-die bending process
بواسطة: 2-s2.0-84938631780
منشور في: (2015)

Wear mechanism of TiCN and TiALN coated drill in drilling of carbon steel
بواسطة: 2-s2.0-84943328611
منشور في: (2015)

Role of WO3 on the conductivity, Judd-Ofelt and luminescence properties of 20K2O−xWO3−(78−x)TeO2−1Er2O3−1Yb2O3 glass system
بواسطة: Noor A.N.M.; Said D.; Naaim M.M.; Malek M.F.; Sutrisno M.S.; Zaid M.H.M.; Hisam R.
منشور في: (2025)

Optimization of the preparation of palm kernel shell-derived activated carbon via Taguchi method for enhanced methylene blue removal
بواسطة: Zaini, وآخرون
منشور في: (2025)

Optimization of the preparation of palm kernel shell–derived activated carbon via Taguchi method for enhanced methylene blue removal
بواسطة: 2-s2.0-85217267363
منشور في: (2025)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
بواسطة: 2-s2.0-84971469649
منشور في: (2016)

Optimization of the preparation of activated carbon from palm kernel shell for methane adsorption using Taguchi orthogonal array design
بواسطة: 2-s2.0-84968649986
منشور في: (2016)

Effects of cryogenic treatment and refrigerated air on tool wear when machining medium density fiberboard
بواسطة: Gisip J.; Gazo R.; Stewart H.A.
منشور في: (2009)

Wear Properties of Acid and Silane Modified CNT Filled Hybrid Glass/Kenaf Epoxy Composites
بواسطة: 2-s2.0-105000088422
منشور في: (2018)

Hardhat-YOLO: A YOLOv5-based Lightweight Hardhat-Wearing Detection Algorithm in Substation Sites
بواسطة: 2-s2.0-85195077787
منشور في: (2024)

A preliminary study into the effect of oxide chemistry on the bonding mechanism of cold-sprayed titanium dioxide coatings on SUS316 stainless steel substrate
بواسطة: Omar N.I.B.; Mohamed S.B.; Yusuf Y.B.; Rahim T.B.A.; Mustafa Z.B.; Ismail S.B.; Bakar I.A.B.A.; Selvamani S.
منشور في: (2022)

Wear properties of nanoclay modified basalt fibre composites under dry adhesive sliding, two-body abrasive, and slurry pot erosive
بواسطة: 2-s2.0-85122698718
منشور في: (2022)

Long-term electricity demand forecasting for malaysia using artificial neural networks in the presence of input and model uncertainties
بواسطة: Tai V.C.; Tan Y.C.; Rahman N.F.A.; Che H.X.; Chia C.M.; Saw L.H.; Ali M.F.
منشور في: (2021)

ASSESSING NEO-M8N GPS-BASED WAYPOINT NAVIGATION PERFORMANCE FOR AN UNMANNED SURFACE VEHICLE
بواسطة: Thamrin N.M.; Misnan M.F.; Nizam M.M.D.; Saaid M.F.
منشور في: (2024)