Coniferous Bark as Filler for Polylactic Acid-Based Biocomposites

• Published in: Polymers
• Main Author: Jasiński W.; Auriga R.; Lee S.H.; Adamik Ł.; Borysiuk P.
• Format: Article
• Language: English
• Published: Multidisciplinary Digital Publishing Institute (MDPI) 2024
• Online Access: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85205124799&doi=10.3390%2fpolym16182669&partnerID=40&md5=f32bb73b85290349dae272e9e46be453

This study explores the possibilities of utilisation of coniferous bark as a filler in wood–polymer composites (WPCs), its impact on properties such as the modulus of rupture (MOR), modulus of elasticity (MOE), thickness swelling (TS) and water absorption (WA) after 2 h and 24 h of immersion in water and the significance of this impact compared to other factors. Six variants of bark–polylactic acid (PLA) WPCs were manufactured, differentiated by their filler content and filler particle size. As a comparison, analogous composites filled with coniferous sawdust were also manufactured. Bark-filled composites were characterised by lower TS and WA after both 2 h and 24 h of immersion, as well as lower water contact angles and surface free energy. The bark filler decreased the composites’ MORs and MOEs, while greater differences were noticed for variants filled with small particles. The type of filler was the second most important factor contributing to variance in this study, with the filler content being the most important one. © 2024 by the authors.