Optimization of cutting parameters to improve power consumption and material removal rate in high efficiency milling

QR Code

Optimization of cutting parameters to improve power consumption and material removal rate in high efficiency milling

This study is an attempt to obtain a suitable combination of the milling parameters to optimize electrical power and material removal rate (MRR) in slot milling of aluminium 6061. Machining parameters of radial depth of cut (RDOC), feedrate (Fr) and axial depth of cut (ADOC) are optimized using high...

Full description

Bibliographic Details
Published in:	Journal of Mines, Metals and Fuels
Main Author:	Noor R.M.; Ramli M.I.; Zubair A.F.; Hemdi A.R.; Kataraki P.
Format:	Article
Language:	English
Published:	Informatics Publishing Limited and Books and Journals Private Ltd 2021
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85204797937&doi=10.18311%2fjmmf%2f2021%2f30149&partnerID=40&md5=430f49eb97f10b40ce7f19947ceae857

Similar Items

Cutting Path-Associated Energy Consumption of Milling Machining Process
by: Rahman Hemdi A.; Md Ali U.F.; Mohamed Noor R.; Irwan Yahaya M.; Mahadzir M.M.; Faiz Zubair A.; Othman M.; Yola M.; Mat Saman M.Z.; Sharif S.
Published: (2020)

A Deep Study on Machining of Titanium Superalloys and its Cutting Tool Materials
by: Jakati S.; Kataraki P.S.; Koti V.; Qasem I.; Hussien A.A.; Janvekar A.A.; Zubair A.F.; Ishak A.
Published: (2024)

Prediction of Cutting Forces for Machine Tools by Neural Networks
by: Kataraki P.S.; Ishak A.; Mazlan M.; Qasem I.; Hussien A.A.; Zubair A.F.; Janvekar A.A.
Published: (2024)

Prediction of Cutting Forces for Machine Tools by Neural Networks
by: Kataraki, et al.
Published: (2024)

Graph Based Method for Lathe Machining Part Model
by: Zubair A.F.; Nazir B.; Hemdi A.R.; Yusoff H.; Ismail H.; Othman M.; Kataraki P.S.; Panjaitan N.; Ishak A.
Published: (2020)

Personal Energy Auditor based on Energy Consumption Rating using Normal Distribution for Energy Efficiency
by: Zurkafli A.Z.; Zaini N.; Latip M.F.A.
Published: (2020)

The Influence of Cutting Parameter under Sustainable Machining Approaches on Surface Roughness of AISI 4340
by: Ahmad A.A.; Ghani J.A.; Haron C.H.C.
Published: (2023)

Effects of different palm oil mill sludge cake rates on the growth and yield of okra (Abelmoschus esculentus)
by: George N.B.J.; Merali M.M.; Sahmat S.S.; Yusop Z.; Aziz A.S.A.; Kamil M.Z.
Published: (2024)

Development of a self-rating system for domestic water consumption in Malaysia
by: Muhammad N.S.; Abdullah J.; Rahman N.A.; Razali N.A.
Published: (2021)

Energy Consumption of Insulated Material Using Thermal Effect Analysis
by: Fadzil M.A.; Norliyati M.A.; Hilmi M.A.; Ridzuan A.R.; Wan Ibrahim M.H.; Assrul R.Z.
Published: (2017)

Potential of Bio-Metal Cutting Fluid from Treated Recycled Cooking Oil for Metal Cutting Fluid Application
by: Ahmad A.A.; Ghani J.A.; Haron C.H.C.
Published: (2022)

Pre-determined household routines parameters values of domestic water consumption
by: Khalid N.E.A.; Hani N.N.; Rasmani K.A.; Fadzil A.F.A.; Ibrahim S.
Published: (2019)

Energy Consumption and Energy Efficiency Prediction using Artificial Neural Network
by: Khairunizam F.N.B.; Salim N.A.; Mohamad H.; Yasin Z.M.
Published: (2024)

Four-Week Consumption of Malaysian Honey Reduces Excess Weight Gain and Improves Obesity-Related Parameters in High Fat Diet Induced Obese Rats
by: Samat S.; Kanyan Enchang F.; Nor Hussein F.; Wan Ismail W.I.
Published: (2017)

Trade-offs and Optimization: Low Power Approaches for Area, Power Consumption, and Performance in Microprocessor Design
by: Sallehuddin N.M.; Muhamad M.; Hussin H.; Halim A.K.; Wahab Y.A.
Published: (2023)

Analysis of Power Consumption and Maximum Demand on Power Factor Using Support Vector Machine Regression
by: Isa S.N.M.; Daud K.; Ibrahim M.N.; Samat A.A.A.; Omar S.; Shafie M.A.
Published: (2024)

Chip morphology in ball nose end milling process of nickel-based alloy material under MQL condition
by: Kasim M.S.; Hafiz M.S.A.; Ghani J.A.; Haron C.H.C.; Izamshah R.; Aziz M.S.A.; Mohamad W.N.F.; Wong P.K.; Saedon J.
Published: (2019)

The effect of higher sludge recycling rate on anaerobic treatment of palm oil mill effluent in a semi-commercial closed digester for renewable energy
by: Sulaiman A.; Busu Z.; Tabatabaei M.; Yacob S.; Abd-Aziz S.; Hassan M.A.; Shirai Y.
Published: (2009)

Design, Develop and Simulate Microdrilling Cutting Tool
by: Siregar I.; Saedon J.B.; Adenan M.S.; Azmi M.F.M.; Harun A.F.B.
Published: (2019)

Improvement of Energy Consumption in Fog Computing via Task Offloading
by: Muhamad W.N.W.; Ribep A.C.; Dimyati K.; Yusof A.L.; Abdullah E.
Published: (2024)

The Effect of the Ambient Temperature Profile in the Determination of Power Cable Ratings
by: Zain W.A.B.W.M.; Nik Ali N.H.; Hamdan M.A.; Azis N.; Johari D.; Rameli N.
Published: (2022)

Identifying High Influence Parameters Using Genetic Algorithm (Ga) Chromosomes For Water Consumption
by: Ahmad S.A.; Hani N.N.; Fadzil A.F.A.; Khalid N.E.A.; Adnan R.; Rasmani K.A.; Din W.I.S.W.
Published: (2021)

On Local Antimagic Chromatic Number of Graphs with Cut-vertices
by: Lau G.-C.; Shiu W.-C.; Ng H.-K.
Published: (2024)

Magnetite nanoparticles (MNPs) used as cadmium metal removal from the aqueous solution from mill scales waste sources
by: Nazri N.A.A.; Azis R.S.; Mustaffa M.S.; Shaari A.H.; Ismail I.; Man H.C.; Saiden N.M.; Abdullah N.H.
Published: (2020)

Removal behaviour of residual pollutants from biologically treated palm oil mill effluent by Pennisetum purpureum in constructed wetland
by: Ujang F.A.; Roslan A.M.; Osman N.A.; Norman A.; Idris J.; Farid M.A.A.; Halmi M.I.E.; Gozan M.; Hassan M.A.
Published: (2021)

Mortality rates and life expectancy improvements among Malaysian elderlies
by: Ibrahim N.S.M.; Shair S.N.; Yusof A.Y.
Published: (2020)

Thermal management of electronic components by using computational fluid dynamic (CFD) software, fluent™ in several material applications (epoxy, composite material & nano-silver)
by: Mazlan M.; Rahim A.; Mustafa Al Bakri A.M.; Razak W.; Zubair A.F.; Najib Y.M.; Azman Bakir A.
Published: (2013)

Energy efficient of WSN using two parameters selection
by: Din W.I.S.W.; Yahya S.; Taib M.N.; Yassin A.I.M.
Published: (2013)

Unravelling Tool Edge Trajectory Patterns: Implications on Surface Roughness in End Milling Process
by: Yusof F.N.; Ismail M.F.; Noor R.M.
Published: (2023)

Removal efficiency of acid red 18 dye from aqueous solution using different aluminium-based electrode materials by electrocoagulation process
by: Amri N.; Abdullah A.Z.; Ismail S.
Published: (2020)

Paper Cuttings Pattern Feature Extraction Based on Machine Vision
by: Chen J.; Wang K.; Daud W.S.A.W.M.
Published: (2024)

The Embodiment of Philosophy in Traditional Chinese Color Paper-Cutting Art
by: Tian, et al.
Published: (2025)

Production Rate Improvement for Assembly Line in Sheet Metal Stamping Industry
by: Othman N.L.A.; Zain N.A.M.; Ibrahim D.; Yaacob Y.
Published: (2019)

The Dynamic Relationship between Energy Consumption and Level of Unemployment Rates in Malaysia: A Time Series Analysis Based on ARDL Estimation
by: Borhan H.; Ridzuan A.R.; Razak M.I.M.; Mohamed R.N.
Published: (2023)

IoT based water consumption management system via low power wide area network
by: Soh Z.H.C.; Isa I.S.; Ahmad F.; Daud K.; Yahaya S.Z.; Ismail A.P.; Abdullah S.A.C.
Published: (2024)

Occupational noise exposure and the effects on blood pressure of grass-cutting workers
by: Kamaruzzaman A.; Ibrahim T.A.; Sulaiman F.R.; Ismail I.
Published: (2021)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
by: Azhar, et al.
Published: (2024)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
by: Azhar, et al.
Published: (2024)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
by: Azhar, et al.
Published: (2024)

Surface Integrity of Inconel 718 under Cryogenic and Dry Cutting Conditions
by: Azhar, et al.
Published: (2024)