Durability of Slag Based Geopolymer Stabilized Clay with High Moisture Condition

QR Code

Durability of Slag Based Geopolymer Stabilized Clay with High Moisture Condition

Clay soils, characterized by their cohesiveness and water retention capacity, exhibit low aeration and tend to swell when water is absorbed, leading to subsequent contraction. The moisture content significantly affects the properties of marine clay, resulting in low strength and high compressibility...

Full description

Bibliographic Details
Published in:	International Journal of Integrated Engineering
Main Author:	Ahmad M.M.; Zaki M.F.M.; Ghazaly Z.M.; Bawadi N.F.; Nujid M.M.; Muhamad K.; Hong T.H.H.
Format:	Article
Language:	English
Published:	Penerbit UTHM 2024
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85201858448&doi=10.30880%2fijie.2024.16.04.006&partnerID=40&md5=bd8fb2909a0ab1a1dbe4aa9e30fb9112

Similar Items

Subgrade stabilization for road foundation in application for inundated area in Perlis, Malaysia
by: Ghazaly Z.M.; Bawadi N.F.; Ahmad M.M.; Nujid M.M.; Zaki M.F.M.
Published: (2024)

Indicative microzonation map of the contact zone between the kenny hill and limestone formation using active, passive and hybrid MASW methods
by: Zaki M.F.M.; Ghazaly Z.M.; Bawadi N.F.; Ahmad M.M.; Nujid M.M.
Published: (2024)

Effect of damper mass on soil-structure displacement in dynamic response to earthquake vibration with finite element modelling
by: Amali S.H.N.S.K.; Nujid M.M.; Zaki M.F.M.; Ghazaly Z.M.; Bawadi N.F.; Ahmad M.M.
Published: (2024)

Highly Durable Antibacterial Textiles: Cross-Linked Protonated Polyaniline-Polyacrylic Acid with Prolonged Electrical Stability
by: Aizamddin M.F.; Zainal Ariffin Z.; Nor Amdan N.A.; Nawawi M.A.; Jani N.A.; Safian M.F.; Shaffee S.N.A.; Nik Mohamed Daud N.M.R.; Myo Thant M.M.; Mahat M.M.
Published: (2024)

Effectiveness of different admixtures on Atterberg limit and compaction characteristics of stabilized soil
by: Jit C.E.L.; Nujid M.; Idrus J.; Tholibon D.A.; Bawadi N.F.
Published: (2021)

Removal of reactive dyes from aqueous solution by modified electric arc furnace slag
by: Majid Z.A.; Hong F.W.; Rosmi M.S.; Ismail N.; Suriani A.B.; Dalila A.R.; Rusop M.
Published: (2014)

Performance of concrete containing steel slag exposed to sulphate environment: A comparison of steel slag and natural aggregate use
by: Ali K.S.; Ishak N.M.; Mohd Ridzuan A.R.
Published: (2011)

Investigation into hot-mix asphalt moisture-induced damage under tropical climatic conditions
by: Ahmad J.; Yusoff N.I.M.; Hainin M.R.; Rahman M.Y.A.; Hossain M.
Published: (2014)

Investigation Moisture Content Effect on Bearing Capacity Failure of Strip Footing Rested on Silty Sand Soil Based on Crack Characteristics Assessment Using Non-Destructive Test
by: Imam Robit N.N.; Nujid M.M.; Md Nor N.S.; Tholibon D.A.; Mukhlisin M.
Published: (2023)

Tensile Behaviour of Slag-based Engineered Cementitious Composite
by: Oh C.L.; Lee S.W.; Yahya N.A.; Pandulu G.; Zain M.R.M.
Published: (2022)

Highly Durable Antibacterial Textiles: Cross-Linked Protonated Polyaniline-Polyacrylic Acid with Prolonged Electrical Stability
by: Aizamddin, et al.
Published: (2024)

Geotechnical and structural assessment on estimated bearing capacity of strip footing resting on silty sand incorporating moisture content effect
by: Md Nujid M.; Tholibon D.A.; Mukhlisin M.
Published: (2024)

Effect of different fibre reinforcement type to the shear strength of soft soil at varying moisture condition
by: Abdullah N.H.H.; Aziz N.H.A.; Jaafar F.F.; Osman N.M.; Ahmad A.; Hamid S.A.
Published: (2019)

Strength Performance of Blended Ash Based Geopolymer Mortar
by: Zahib Z.M.; Kamaruddin K.; Saman H.
Published: (2018)

Correlation between california bearing ratio (CBR) with plasticity index of marine stabilizes soil with cockle shell powder
by: Nujid M.M.; Idrus J.; Azam N.A.; Tholibon D.A.; Jamaluddin D.
Published: (2019)

Enhancing weathered slope stability assessment through the integration of slake durability index, elastic modulus of knocking ball, and electrical resistivity tomography
by: Pauzi F.N.A.; Ismail M.A.M.; Razali M.; Cheng N.; Date K.; Yokota Y.
Published: (2024)

Durablity performance of recycled aggregate concrete
by: Ridzuan A.R.M.; Ibrahim A.; Ismail A.M.M.; Diah A.B.M.
Published: (2005)

Plasticity and strength Behaviour of marine clay stabilized with waste steel dust for soil improvement works
by: Abdullah N.H.H.; A. Talibsyahirah; Ahmad A.; Ismail N.
Published: (2021)

Effect of Titanium Dioxide in Superhydrophobic Coating Using Expanded Polystyrene Foam and Palm Slag
by: Hasmadi N.Z.B.; Zakaria M.S.; Nordin R.M.; Halim K.A.A.; Ibrahim L.H.; Fadzil N.F.M.
Published: (2023)

The Optimal Performance of a Geopolymer Hollow Pyramidal Microwave Absorber with Triangular Slotted
by: Asmadi M.F.; Abdullah H.; Taib M.N.; Fazin M.I.; Ahmad A.; Kasim N.M.; Ismail N.A.; Jumidali M.M.
Published: (2023)

Correlation Study of Compressive Strength with Water Absorption and Density for Fly Ash based Geopolymer Concrete
by: Tahir M.F.M.; Zailani W.W.A.; Faris M.A.; Alomayri T.
Published: (2024)

Physico-mechanical properties of geopolymer mortars for repair applications: Impact of binder to sand ratio
by: Zailani W.W.A.; Apandi N.M.; Adesina A.; Alengaram U.J.; Faris M.A.; Tahir M.F.M.
Published: (2024)

A Review on the Fly Ash Characteristics and Geopolymerization Reaction Mechanism of Fly Ash based Geopolymer
by: Zailani W.W.A.; Tahir M.F.M.; Tajudin M.A.F.M.A.; Abdullah S.
Published: (2024)

OPTIMIZATION OF ALKALI ACTIVATOR ON THE STRENGTH PROPERTIES OF FLY ASH BASED GEOPOLYMER REPAIR MATERIALS
by: Zailani W.W.A.; Apandi N.M.; Abdullah M.M.A.; Tahir M.F.M.; Sinarta I.N.; Agustini N.K.A.; Abdullah S.
Published: (2024)

Design reinforced concrete structures: Differences in procedure, formula, and results between Eurocode 2 and British Standard 8110
by: Rahim M.A.; Ying L.C.; Shahidan S.; Ghazaly Z.M.; Anudai S.; Bawadi N.F.; Isa N.F.; Hassan Z.; Habulat A.; Ismail Z.-A.
Published: (2017)

Peat modification integrating Geopolymer and fly ash
by: Mohamed Jais I.B.; Abdullah N.; Md Ali M.A.; Johar M.A.
Published: (2019)

Impact of low molecular weight acid and moisture on the thermal ageing properties of palm oil
by: Mustam M.M.; Azis N.; Jasni J.; Halis R.; Talib M.A.; Mohamad N.A.; Yaakub Z.
Published: (2024)

Mechanical, Durability and Rheology Properties of Ultra High Performance Concrete (UHPC) with Low Cement Content
by: Zahid M.Z.A.M.; Bakar B.H.A.; Nazri F.M.; Alasmari H.; Latiff M.F.P.M.; Ayob A.; Muhammad K.; Ahmad M.M.; Manaf B.H.A.; Ishak M.K.
Published: (2021)

High Voltage Durability of Bambusa Vulgaris as a Biocomposite Material
by: Zain M.Y.M.; Ali M.T.; Hussin A.N.H.
Published: (2018)

Moisture Impact Analysis on NFC Tag Antennas
by: Faudzi N.M.; Azlan A.A.; Razali A.R.; Rahman N.H.A.; Manaf A.A.; Ibrahim A.; Mozi A.M.
Published: (2023)

Palm Oil Fuel Ash (POFA) and Ground Granulated Blast-furnace Slag (GGBS) Lightweight Concrete Block
by: Jasni N.; Salleh N.; Hamid N.A.A.; Jamellodin Z.; Majid M.A.; Ali N.; Radziah S.; Ismail N.; Adnan S.H.; Ismail S.; Nurul H.S.
Published: (2021)

Silica Bonding Reaction on Fly Ash Based Geopolymer Repair Material System with Incorporation of Various Concrete Substrates
by: Al Bakri Abdullah M.M.; Aziz I.H.A.; Zailani W.W.A.; Rahim S.Z.A.; Yong H.C.; Sandu A.V.; Peng L.S.
Published: (2022)

Mechanical durability and degradation characteristics of long kenaf-reinforced PLA composites fabricated using an eco-friendly method
by: ’Atiqah Abdul Azam F.; Tharazi I.; Bakar Sulong A.; Che Omar R.; Muhamad N.
Published: (2024)

Nanomaterials in recycled aggregates concrete applications: mechanical properties and durability. A review
by: Allujami H.M.; Abdulkareem M.; Jassam T.M.; Al-Mansob R.A.; Ng J.L.; Ibrahim A.
Published: (2022)

Synthesis and Characterization of Geopolymer Grout from Fly Ash Class C
by: Ramasamy S.; Santiagoo R.; Ahmad R.; Kasmuri N.; Faris M.A.; Mohanad H.
Published: (2024)

Multi-area economic dispatch performance using swarm intelligence technique considering voltage stability
by: Zamani M.K.M.; Musirin I.; Suliman S.I.; Othman M.M.; Kamal M.F.M.
Published: (2017)

Durability Performance of Utilising Quarry Dust as Sustainable Material in Self-Compacting Concrete
by: Siti Quraisyah A.A.D.; Kartini K.; Hamidah M.S.
Published: (2019)

Experimental Study Using Recycled Waste Tyre as Sustainable Clay Soil Stabilisation
by: Zain N.H.M.; Salim N.A.M.; Bahri I.S.S.; Yusof Z.M.
Published: (2022)

Characterization and Properties of Binder and Nano-Filler in Geopolymer Paste with Graphene Oxide
by: Shamsol, et al.
Published: (2024)

Effect of Mineralogical Content on Strength and Durability of Weathered Sedimentary Outcrop from Semanggol Formation
by: Albar A.; Ismail M.K.A.; Md Hasan A.S.; Osman N.M.; Razali M.
Published: (2022)