Tribo-corrosion and mechanical performance of electro-deposited nano-composite h-BN/epoxy coating

QR Code

Tribo-corrosion and mechanical performance of electro-deposited nano-composite h-BN/epoxy coating

In this work, mild steel as a substrate was coated by electrodeposition in a bath mixed with nickel sulfate (NiSO4·6H2O), nickel chloride (NiCl4·6H2O), and boric acid (H3BO3) using nanocomposite cetyltrimethylammonium bromide, hBN, and epoxy with hardener. The experiments were designed using the Tag...

Full description

Bibliographic Details
Published in:	Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Main Author:	Shaikh M.A.N.; Ravi P.; Roselina N.R.N.; Katiyar J.K.
Format:	Article
Language:	English
Published:	SAGE Publications Ltd 2024
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85195255103&doi=10.1177%2f13506501241257560&partnerID=40&md5=40175ef6e27084ffcc05cb66ee6e4736

Similar Items

Effect of substrate's surface roughness on corrosion and wear rate of Ni-GO nanocomposite coating
by: Yussoff, et al.
Published: (2024)

Effect of Activator Pre-treatment to the Cobalt Alloys Coating Performance
by: Hyie K.M.; Abdullah N.S.; Roselina N.R.N.; Natasha A.N.; Yusoff H.B.
Published: (2022)

Mechanical and Corrosion Protection Characteristics of CNTs/epoxy resin Nanocomposite Coating on Buried API 5L X65 Steel Storage Tank
by: Buhari A.S.; Abdulrahman A.S.; Lawal S.A.; Abdulkareem A.S.; Muriana R.A.; Jimoh O.T.; Ibrahim H.K.; Busari Y.O.
Published: (2023)

Low Velocity Impact Response of Kenaf/Epoxy Composites Exposed to Corrosive Solutions
by: Abdullah A.H.; Hamid N.I.N.A.; Solihin Z.H.; Ghani M.A.A.; Manan N.F.A.
Published: (2024)

Polyester-graphene primer coatings: Corrosive and mechanical properties
by: Hasniraaiman A.H.; Zuliahani A.; Ishak M.A.M.; Faiza M.A.; Azniwati A.A.
Published: (2020)

Corrosion inhibition of mild steel by electrodeposited poly(M-aminophenol) coating
by: Sabrina M.Y.; Mohamad Kamal H.; Ismaniza I.; Rosmamuhamadani R.
Published: (2021)

Physical and structural analyses for batch-to-batch consistency of epoxy paints: a case study on epoxy coatings for oil and gas industry in Malaysia
by: Salim Y.S.; Chan C.H.; Ong C.H.
Published: (2018)

Morphology and characterization study on effective microorganism (EM) water based epoxy coatings
by: Onn M.; Ahmad Z.; Zainuddin A.; Mohammad Iliyas S.M.
Published: (2022)

Short Review: Corrosion Mitigation of AZ31 Magnesium Alloy by Superhydrophobic Coatings
by: Fadzil N.F.M.; Zakaria M.S.; Nordin R.M.; Halim K.A.A.; Ibrahim L.H.
Published: (2023)

Characterization of hydrophobic epoxy soybean oil-based rigid plastic reinforced with nano SiO2 particles
by: Wang W.; Jiang J.; Essawy H.; Lee S.H.; Lum W.C.; Zhou X.; Du G.; Zhang J.
Published: (2024)

SEM characterization of ZnO thin films deposited by dip-coating technique
by: Zakaria N.Z.; Amizam S.; Rusop M.
Published: (2009)

Characterization Of Carbon Nanotubes Coated Monolith Synthesized Via Chemical Vapor Deposition
by: Qistina O.; Salmiaton A.; Choong T.S.Y.; Izhar S.; Taufiq-Yap Y.H.
Published: (2025)

Post-deposition heat treatment effect on pH sensing behavior of chemical bath deposited nanostructured zinc oxide
by: Binti Rosli A.B.; Binti Hamid N.H.; Bin Zulkefle M.A.; Binti Shariffudin S.S.; Binti Abdullah W.F.H.; Herman S.H.
Published: (2023)

Design of Electro-Textile UHF RFID Tag through T-Match Network
by: Shah A.A.S.A.; Abd Rahman N.H.; Ali M.T.; Ahmad M.R.; Nordin S.A.; Zaidi N.I.; Abdul Aziz N.H.; Yamada Y.
Published: (2018)

The optimization of CNT-PVA nanocomposite for mild steel coating: Effect of CNTs concentration on the corrosion rate of mild steel
by: Maryam M.; Ibrahim N.M.A.A.; Eswar K.A.; Guliling M.; Suhaimi M.H.F.; Khusaimi Z.; Abdullah S.; Rusop M.
Published: (2018)

The Effect of H2S Pressure on the Formation of Multiple Corrosion Products on 316L Stainless Steel Surface
by: Shah M.; Ayob M.T.M.; Rosdan R.; Yaakob N.; Embong Z.; Othman N.K.
Published: (2020)

Effect of Mg dopant percentage on the photoluminescence property of nano-structured ZnO thin films deposited on Si substrate
by: Malek M.F.; Alfah M.; Khusaimi Z.; Mamat M.H.; Sahdan M.Z.; Rusop M.
Published: (2009)

Non-minimum phase model of vertical position electro-hydraulic cylinder for trajectory ZPETC
by: Ishak N.; Tajjudin M.; Ismail H.; Patrick M.; Md Sam Y.; Adnan R.
Published: (2012)

Analysis on Bending Performance of the Electro-Textile Antennas with Bandwidth Enhancement for Wearable Tracking Application
by: Zaidi N.I.; Abd Rahman N.H.; Yahya M.F.; Nordin M.S.A.; Subahir S.; Yamada Y.; Majumdar A.
Published: (2022)

Optimization of laser-induced graphene membrane for simultaneous photo- and electro-thermal membrane distillation
by: Tan Y.Z.; Tamilselvam N.R.; Alias N.H.; Oor J.Z.; Goei R.; Tok A.I.Y.; Chew J.W.
Published: (2024)

Thermal management of electronic components by using computational fluid dynamic (CFD) software, fluent™ in several material applications (epoxy, composite material & nano-silver)
by: Mazlan M.; Rahim A.; Mustafa Al Bakri A.M.; Razak W.; Zubair A.F.; Najib Y.M.; Azman Bakir A.
Published: (2013)

Effect of Copper Addition on the Properties of TiO2 Coatings Deposited by Air Plasma Spray Process
by: Rahim T.A.; Amir N.I.A.B.; Mohamad N.; Dom A.H.M.; Omar N.I.; Yusuf Y.; Bakar I.A.A.; Juoi J.M.
Published: (2023)

The Deposition of Titanium Dioxide Nanostructures Layer Using One-step Solution Process and Spin-coating Technique
by: Achoi M.F.; Soga T.; Mahmood M.R.; Abdullah S.
Published: (2021)

Synthesis, characterization and corrosion inhibition screening of benzohydroxamic acid derivatives in H2SO4: A langmuir isotherm
by: Razali F.N.; Nadirah Jamaluddin N.A.; Dzulkifli N.N.
Published: (2020)

Electro-Thermo-Mechanical Integrity of Electric Vehicle Battery Interconnects Using Micro-TIG Welding
by: Abd Manan A.A.; Amir A.; Arifin N.M.; Mhd Noor E.E.
Published: (2024)

The Effect of Cobalt Alloy Nanocrystalline Coating on Tensile Properties and Surface Performance of Mild Steel
by: Zabri M.Z.; Masdek N.R.N.; Hyie K.M.
Published: (2023)

Synthesis and corrosion inhibition studies of N-((4 and 3-chlorophenyl) carbamothioyl) benzamide in 1M H2SO4
by: Zulkifli N.Z.; Kassim K.; Nordin N.A.
Published: (2017)

Development of iridium oxide sensor for surface pH measurement of a corroding metal under deposit
by: Rouhi J.; Kakooei S.; Ismail M.C.; Karimzadeh R.; Mahmood M.R.
Published: (2017)

Influence of Remaining Oxide on the Adhesion Strength of Supersonic Particle Deposition TiO2 Coatings on Annealed Stainless Steel
by: Omar N.I.; Yusuf Y.; Sundi S.A.B.; Abu Bakar I.A.; Andre Fabiani V.; Abdul Rahim T.; Yamada M.
Published: (2023)

Issue of ZnO composition on MEH-PPV: ZnO nanocomposites thin film deposited by spin coating method
by: Azhar N.E.A.; Shariffudin S.S.; Nagaoka S.; Rusop M.
Published: (2019)

Maximum Quasi-Static Indentation Stress Analysis of Flax/Epoxy and Glass/Epoxy Polymer Composites
by: Azhar I.I.S.; Jumahat A.; Rahman N.L.A.; Khiari R.; Nasir M.A.J.A.
Published: (2022)

pH sensitivity dependency on the annealing temperature of spin-coated titanium dioxide thin films
by: Yusof K.A.; Rahman R.A.; Zulkefle M.A.H.; Herman S.H.; Abdullah W.F.H.
Published: (2016)

Comparative corrosion behaviour of austenitic 316L and duplex 2205 stainless steels: microstructure and property evolution at highly partial pressure of H2S
by: Shah M.; Ayob M.T.M.; Yaakob N.; Embong Z.; Othman N.K.
Published: (2022)

Bending Stress and Deformation Analysis of Nanosilica Filled Arenga Pinnata/Epoxy and Glass/Epoxy Polymer Composites
by: Azhar I.I.S.; Jumahat A.; Said J.M.
Published: (2023)

Design and Simulation of Micro-Electro-Mechanical Systems (MEMS) Capacitive Pressure Sensor for Thermal Runaway Detection in the Electric Vehicle
by: M Hajizi H.M.; Aris H.; Norhaimi W.M.W.; Nor N.I.M.; Sauli Z.; Aziz A.A.
Published: (2023)

Design and Simulation of Micro-Electro-Mechanical Systems (MEMS) Capacitive Pressure Sensor for Thermal Runaway Detection in the Electric Vehicle
by: Hajizi, et al.
Published: (2023)

Synthesis and β-glucuronidase inhibitory activity of 2-arylquinazolin-4(3H)-ones
by: Khan K.M.; Saad S.M.; Shaikh N.N.; Hussain S.; Fakhri M.I.; Perveen S.; Taha M.; Choudhary M.I.
Published: (2014)

The Effects of Diamond Cutout Size and Fibre Orientation on the Failure Behaviour of Graphite Epoxy and Glass Epoxy Composite Laminates
by: Yusof Y.; Norazllan M.Z.; Azman N.A.N.; Mahmud J.
Published: (2022)

Effect of Angle Ply on Tensile Strength of Unidirectional Glass/Epoxy and Arenga Pinnata/Epoxy Hybrid Composite Laminate
by: Said J.M.; Jumahat A.; Mahmud J.
Published: (2023)

The effects of open hole and fiber orientation on Kevlar/Epoxy and Boron/Epoxy composite laminates under tensile loading
by: Azmi N.N.; Mohd Radi M.B.A.; Muhammad Taufik M.H.N.; Adnan N.; Minhuaazam L.N.; Mahmud J.
Published: (2023)