| Summary: | The development of active, stable, and low-cost catalysts for efficient reactions is appealing but difficult. The objectives of this study are to synthesize Cr2O3-Al2O3 catalysts and analyze their physical properties using SEM, XRD, TGA-DTA, and FTIR. The impregnation method was used to create Cr2O3-Al2O3 catalysts with five different chromium oxide loadings (3wt%, 6wt%, 9wt%, 12wt%, and 15wt%). The physical properties of the catalysts were characterized using FTIR, SEM, BET, and TGA. The FTIR spectra and SEM images of the samples confirmed that Cr2O3 was successfully incorporated on Al2O3 support. TGA was used to evaluate the weight loss and thermal stability of the catalysts during the calcination process. The hydroxyl groups of alumina, as well as its water affinity, cause more mass loss when heated because water molecules are released. The addition of chromium oxide, on the other hand, alters thermal interactions, resulting in different mass loss behavior for chromium oxide alumina. The surface area changes seen by BET analysis gave insights into the structural flexibility of the catalyst across varied loading levels. The physical properties of synthesized catalysts demonstrated their ability to be utilized in a variety of catalytic reactions. © 2024 The Authors, published by EDP Sciences.
|
|---|