Properties of Hybrid Plywood Produced by Utilisation of Peeler Cores

QR Code

Properties of Hybrid Plywood Produced by Utilisation of Peeler Cores

The aim of this research work was to investigate the feasibility of upcycling poplar (Populus spp.) peeler cores as a by-product from the production of plywood in manufacturing lightweight hybrid poplar and beech plywood panels, containing different ratios (60%, 80%, and 100%) of peeler core section...

Full description

Bibliographic Details
Published in:	Forests
Main Author:	Koynov D.; Antov P.; Valyova M.; Savov V.; Dochev I.; Lee S.H.
Format:	Article
Language:	English
Published:	Multidisciplinary Digital Publishing Institute (MDPI) 2024
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85191403049&doi=10.3390%2ff15040582&partnerID=40&md5=316fa89b0f5b4581674c0d8e7125afb0

Similar Items

A comprehensive review of lignin-reinforced lignocellulosic composites: Enhancing fire resistance and reducing formaldehyde emission
by: Iswanto A.H.; Lee S.H.; Hussin M.H.; Hamidon T.S.; Hajibeygi M.; Manurung H.; Solihat N.N.; Nurcahyani P.R.; Lubis M.A.R.; Antov P.; Savov V.; Kristak L.; Kawalerczyk J.; Osvaldová L.M.; Farid S.; Selvasembian R.; Fatriasari W.
Published: (2024)

The Perception and Understanding of Malaysia Madani’s Core Values
by: Sualman I.
Published: (2025)

Utilising Tiktok Features for Speech Communication
by: Tan K.H.; Rajendran A.; Philip B.; Alias J.; Saad S.M.; Mohamad Z.
Published: (2024)

The Utilisation of Coconut Shell (Cocos Nucifera) as a Partial Aggregate Replacement on the Properties of Concrete in Terms of Thermal Behaviour
by: Leman A.S.; Shahidan S.; Naziri A.S.M.; Tayeh B.
Published: (2025)

PRESCRIBING TREND AND DRUG COST ANALYSIS OF ORAL HYPOGLYCEMIC AGENTS USING DRUG UTILISATION REVIEW
by: Chanthran N.; Ming L.C.; Tan C.S.; Menon S.; Kaur H.J.; Kalusalingam A.; Khan A.; Loy M.J.; Manan M.M.
Published: (2020)

Utilisation of palm oil fuel ash (POFA) as cement replacement by using powder and liquidation technique
by: Sidek M.N.M.; Hashim N.H.; Rosseli S.R.; Nor M.R.M.; Ismail S.; Saman H.M.; Arshad M.F.; Alisibramulisi A.; Zainudin F.
Published: (2018)

Health status, healthcare utilisation, and quality of life among the coastal communities in Sabah: Protocol of a population-based survey
by: Dahlui M.; Azzeri A.; Zain M.A.; Mohd Noor M.I.; Jaafar H.; Then A.Y.H.; Suhaimi J.; Kari F.; Creencia L.A.; Madarcos J.R.; Jose E.; Fleming L.E.; White M.P.; Morrissey K.; Fadzil K.S.; Goh H.C.
Published: (2020)

Zinc-substituted hydroxyapatite produced from calcium precursor derived from eggshells
by: Mardziah C.M.; Ramesh S.; Tan C.Y.; Chandran H.; Sidhu A.; Krishnasamy S.; Purbolaksono J.
Published: (2021)

A Comparative Seismic Performance Between Precast Hollow Core Walls and Conventional Walls Using Incremental Dynamic Analysis
by: Hamid N.H.; Mander J.B.
Published: (2012)

Advancing Proactive Producer Mobility Management in Named Data Networking: A Conceptual Model
by: Zukri N.H.A.; Arif A.S.C.M.; Alsamman M.; Abrar A.; Fazea Y.
Published: (2024)

Utilization of waste tire and rubber from automobiles in the manufacturing of particleboards and evaluation of its properties
by: Čabalová I.; Krilek J.; Bubeníková T.; Ružiak I.; Nemec M.; Lee S.H.; Lubis M.A.R.; Darabošová A.; Mancel V.; Kristak L.; Todaro L.; Giudice V.L.
Published: (2025)

Molecular Identification of Thermophilic Bacteria Producing Lipase from Two Hot Springs in Perak, Malaysia
by: Suraya S.N.; Rasol R.; Razarinah W.A.R.W.; Norashirene M.J.
Published: (2024)

Comparison of the Characteristics of Flocs Produced via Leachate Electrocoagulation using Stationary and Vibration Electrode Plates
by: Tarmizi T.; Muhammad Niza N.
Published: (2024)

Quality Assessment of Hydroxychloroquine Tablet: A Comparative Evaluation of Drug Produced by Different Pharmaceutical Companies in Bangladesh
by: Islam R.; Hossain S.; Hossain S.; Islam M.T.; Sultana S.; Nizhum N.; Ahamed K.U.; Choo C.-Y.; Tan C.S.; Goh K.W.
Published: (2023)

The effect of incubation time, temperature and pH variations on the surface tension of biosurfactant produced by Bacillus spp.
by: Marajan C.; Alias S.; Ramasamy K.; Abdul-Talib S.
Published: (2018)

Disaster victim identification: the co-utilisation of applied biosystems RapidHIT ID system and DJI Matrice 300 drone for onsite DNA analysis
by: Sabri, et al.
Published: (2025)

Utilization of Spent Coffee Grounds as a Sustainable Resource for the Synthesis of Bioplastic Composites with Polylactic Acid, Starch, and Sucrose
by: Masssijaya S.Y.; Lubis M.A.R.; Nissa R.C.; Nurhamiyah Y.; Nugroho P.; Antov P.; Lee S.-H.; Papadopoulos A.N.; Kusumah S.S.; Karlinasari L.
Published: (2023)

Bleached Rice Straw Lignin: Thermal-Chemical Properties and Its Application in Polyurethane-based Paper Coatings
by: Nurcahyani P.R.; Fatriasari W.; Abdullah Z.A.; Hassan N.H.M.; Lee S.H.
Published: (2025)

EFFECT OF UF ADDITION ON PROPERTIES OF CITRIC ACID-STARCH BONDED PARTICLEBOARD
by: Zhou H.X.; Abdullah U.H.; Lee S.H.; Abdullah L.C.; Salim S.; Hamid N.H.; Kamarudin S.H.; Zhang J.
Published: (2025)

The Architecture of BaTiO3 Nanoparticles Synthesis via Temperature-Responsive for Improved Oil Recovery: A Molecular Dynamics Simulation and Core-Flooding Experimental Study
by: Sikiru S.; Soleimani H.; Rostami A.; Khodapanah L.
Published: (2025)

Electrochemical Sensors based on Gold-Silver Core-Shell Nanoparticles Combined with a Graphene/PEDOT:PSS Composite Modified Glassy Carbon Electrode for Paraoxon-ethyl Detection
by: Wahyuni W.T.; Putra B.R.; Rahman H.A.; Anindya W.; Hardi J.; Rustami E.; Ahmad S.N.
Published: (2024)

The Architecture of BaTiO3 Nanoparticles Synthesis via Temperature-Responsive for Improved Oil Recovery: A Molecular Dynamics Simulation and Core-Flooding Experimental Study
by: Sikiru, et al.
Published: (2025)

Application of an Inline Mixer to Produce Surfactant-Free Biodiesel-diesel/Water Emulsion Fuel: An Analysis of Water Droplets Characteristics and Drive Cycle Emissions
by: Tamam M.Q.M.; Yahya W.J.; Abdul Rahman H.; Ithnin A.M.; Abd Kadir H.; Rahman M.M.; Noge H.; Koga T.; Sugeng D.A.
Published: (2024)

Students’ engagement in a hybrid classroom: a comparison between face-to-face and virtual environments
by: Teoh S.H.; Boon Zik Hong J.; Md Shamsudin N.; Singh P.; Hartono R.
Published: (2025)

Mechanical Properties of High-Volume Fly Ash Mortar Modified by Hybrid Carbon Nano Tube and Graphene Oxide
by: Maizuar; Fithra, et al.
Published: (2024)

Mechanical Properties of High-Volume Fly Ash Mortar Modified by Hybrid Carbon Nano Tube and Graphene Oxide
by: Maizuar; Fithra H.; Khairullah; Usrina N.; Bahri S.; Senin S.F.
Published: (2024)

Effect of powder loading on rheology and dimensional variability of porous, pseudo-elastic NiTi alloy produced by metal injection moulding (MIM) using a partly water soluble binder system
by: Ismail M.H.; Sidambe A.T.; Figueroa I.A.; Davies H.A.; Todd I.
Published: (2010)

Soil chemical properties associated with penguin carrion in Barton Peninsula, King George Island, Antarctica
by: Zaini N.A.; Ismail S.S.; Low V.L.; Mahmud M.H.; Houssaini J.; Lee W.Y.; Heo C.C.
Published: (2024)

Synergistic Effect Between Empty Fruit Bunch and HDPE on Products Yield and Functional Group Content in Bio-fuels Produced from Co-liquefaction Process Under Supercritical Methanol Condition
by: Ani A.Y.; Ali S.N.; Ibrahim N.R.; Ahmad R.; Ismail K.; Mohd Ishak M.A.
Published: (2024)

RMHA-Net: Robust Optic Disc and Optic Cup Segmentation Based on Residual Multiscale Feature Extraction With Hybrid Attention Networks
by: Zedan, et al.
Published: (2025)

RMHA-Net: Robust Optic Disc and Optic Cup Segmentation Based on Residual Multiscale Feature Extraction With Hybrid Attention Networks
by: Zedan M.J.M.; Abdani S.R.; Lee J.; Zulkifley M.A.
Published: (2025)

Enhancing PETRONAS share price forecasts: a hybrid Holt integrated moving average
by: Fozi N.Q.M.; Hasan N.I.A.; Aziz A.A.; Zahari S.M.; Ganggayah M.D.
Published: (2025)

Epoxidation of sunflower oil via in situ generated hybrid peracids mechanism
by: Mohamed N.; Azmi I.S.; Riduan M.A.; Morsidi N.I.A.; Kamal N.; Jalil M.J.
Published: (2025)

The properties of Cross Laminated Timber (CLT): A review
by: Alia Syahirah Y.; Anwar U.M.K.; Sh L.; Ong C.B.; Asniza M.; Paridah M.T.
Published: (2025)

Hybrid of the lee-carter model with maximum overlap discrete wavelet transform filters in forecasting mortality rates
by: Yaacob N.A.; Jaber J.J.; Pathmanathan D.; Alwadi S.; Mohamed I.
Published: (2021)

Review of PPCPs remediation in Asia: the role of agricultural waste in adsorption-membrane hybrid technology
by: Ndia Ntone E.P.; Abu Samah R.; Abdul Wahab M.S.; Alsalhy Q.F.; Rahman S.A.
Published: (2025)

Innovative hybridization of the two-archive and PROMETHEE-II triple-objective and multi-criterion decision making for optimum configuration of the hybrid renewable energy system
by: Ridha H.M.; Hizam H.; Mirjalili S.; Othman M.L.; Ya'acob M.E.; Ahmadipour M.
Published: (2023)

Adoption and abandonment of hybrid rice technology: The case of Bangladesh
by: Mottaleb K.A.; Durand-Morat A.; Fatah F.A.; Sarkar M.A.R.
Published: (2025)

Rapid prototyping for low-level hybridization of PSO-GA
by: Masrom S.; Abidin S.Z.Z.; Omar N.; Nasir K.
Published: (2014)

Natural polymer/inorganic material based hybrid scaffolds for skin wound healing
by: Ninan N.; Muthiah M.; Park I.-K.; Wong T.W.; Thomas S.; Grohens Y.
Published: (2015)