| Summary: | Present paper aims to investigate effects of nanoparticle addition to thermal oil of parabolic trough collectors which are integrated to Kalina cycle for electricity generation to run an alkaline electrolyzer for hydrogen production. Thermodynamic models for Kalina cycle, thermal model for parabolic collectors and electrochemical models for water electrolyzer are developed for overall plant modeling. Three types of nanoparticles including: copper oxide, alumina and titanium oxide are considered and overall plant performance is investigated using these nanoparticles and is compared with basefluid. The nanofluid thermophysical properties are evaluated as a function of nanoparticles’ properties, volume fraction and the base fluid properties. The effects of key variables such as nanoparticle volume fraction, collector inlet temperature, evaporation pressure and ammonia concentration of Kalina system were evaluated on hydrogen production as well as exergetic efficiencies. Results revealed greater positive influence for CuO compared to TiO2 and Al2O3 on performance improvement for both hydrogen generation and its exergetic efficiency. Also, compared to basefluid (without nanoparticles) case, it was found that CuO particles result in a solar-to-H2 exergy efficiency improvement by 4.7%. Using this nanofluid with a volume fraction of 5%, the H2 production rate enhances from 0.633kg/hto0.664kg/h, indicating 4.9 % improvement. © 2023
|
|---|