A Review of Material, Design, and Techniques in 3D Printing for Medical Applications

QR Code

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications

This review research assesses the numerous 3D printing methods utilized in medical applications and the materials and design methods that are associated with the current and existing technology. The article thoroughly examines the advantages and disadvantages of various techniques and materials and...

Full description

Bibliographic Details
Published in:	International journal of online and biomedical engineering
Main Author:	Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
Format:	Review
Language:	English
Published:	International Association of Online Engineering 2023
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85178288502&doi=10.3991%2fijoe.v19i16.40855&partnerID=40&md5=43f21314c059debdeeac0a43685065c0

Similar Items

Design and Analysis of 3D Printed Prosthetic Hand for Symbrachydactyly Patients
by: Mazlan M.A.; Fadzil W.F.A.W.; Rashid H.; Abdullah A.H.
Published: (2019)

Effects of Printing Parameters on the Mechanical Strength of Thermoplastics 3D Printed Specimens
by: Mazlan M.A.; Mustar M.F.; Abdullah A.H.; Zakaria N.A.C.; Hashim N.M.; Pangesty A.I.
Published: (2023)

Development of an Artificial Nose Using 3D Printing Technology for Patients with Tumors
by: Abdullah A.H.; Bolhassan N.; Mazlan M.H.; Bahari A.R.; Marwan S.H.
Published: (2024)

Development of 3D Printed Socket for Transtibial Prosthetic Leg
by: Fadzil W.F.A.W.; Mazlan M.A.; Hanapiah F.A.; Abdullah A.H.
Published: (2019)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
by: Hamizan N.S.; Shuib S.; Ghani A.R.A.; Abdullah A.H.; Zain M.R.A.M.; Saeid N.H.; Aziz I.
Published: (2023)

3D Metal Printing Using Generative Design and Numerical Computation
by: Taufek T.; Adenan M.S.; Manurung Y.H.P.; Sulaiman S.A.; Zaid N.S.; Romzi N.A.S.
Published: (2021)

The Application of Conjugate Gradient Methods to Optimize 3D Printed Parameters
by: Hajar N.; ‘aini N.; Shapiee N.; Rivaie M.; Samsudin A.; Hussin N.H.; Anuar S.H.H.
Published: (2024)

Development of Customized Passive Arm Prosthetics by Integrating 3D Printing and Scanning Technology
by: Zulkifli M.F.; Hashim N.M.; Ramlee M.H.; Whulanza Y.; Abdullah A.H.
Published: (2023)

Sustainable biomaterials for 3D printing
by: Mohamad D.; Abdullah A.M.; Omar M.
Published: (2023)

Parametric study on the stress behaviour of 3D printed PLA plate with hole
by: Kuntjoro W.; Jalil A.M.H.B.A.; Redzuan A.N.B.A.; Nasir R.E.B.M.
Published: (2023)

Development of an Artificial Nose Using 3D Printing Technology for Patients with Tumors
by: Abdullah, et al.
Published: (2024)

Design & Development of Adjustable Handheld 3D Scanner Jig
by: Abdullah A.H.; Yusof M.H.; Hamid A.H.A.; Noh M.H.M.; Mazlan M.A.; Rashid H.
Published: (2022)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
by: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
Published: (2022)

ANALYSIS RE-ENTRANT HONEYCOMB AUXETIC STRUCTURE FOR LUMBAR VERTEBRAE USING FINITE ELEMENT ANALYSIS
by: Zulkefli A.A.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.; Mazlan M.A.
Published: (2024)

DEVELOPMENT OF TENODESIS GRIP ENHANCE ORTHOSIS (T-GEO) USING 3D PRINTING TECHNOLOGY
by: Shukor S.; Hashim N.M.; Zakaria N.A.C.; Abdullah A.H.
Published: (2021)

Initial Study on Rheological Behaviour of Hydroxyapatites/Polylactic Acid Composite for 3D Printing Filament
by: Marzuki A.P.; Nasir M.A.M.; Salleh F.M.; Ismail M.H.; Murat B.I.S.; Ibrahim M.
Published: (2024)

Hand Gesture to Control a Low Cost 3-D Printed Arm using Android Application
by: Mohd Noor N.M.B.; Musrijan M.M.B.
Published: (2021)

Plant oil body as an effective improver for surimi-based 3D printing
by: Yang R.; Bao L.; Liu Y.; Liang J.; Zheng B.; Miao W.; Shi X.; Gao P.; Zhou R.; Zhao Y.
Published: (2024)

The Influence of UAV Altitudes and Flight Techniques in 3D Reconstruction Mapping
by: Zulkifli M.H.; Tahar K.N.
Published: (2023)

Recent advancement on polyamide composites as an alloplastic alternative in 3D printing for craniofacial reconstruction
by: Abdullah A.M.; Omar M.; Mohamad D.
Published: (2024)

Self-sanitizing reusable glove via 3D-printing and common mold making method
by: Sadasivuni K.K.; Maurya M.R.; Houkan M.T.; Cabibihan J.-J.; Geetha M.; Al-Maadeed S.; Omar H.; Asnida Asli N.
Published: (2023)

Three-Dimensional (3D) Printing in the Case of a Concurrent Polyp and an Ectopic Tooth
by: Rajendram, et al.
Published: (2024)

Initial Study on Rheological Behaviour of Hydroxyapatites / Polylactic Acid Composite for 3D Printing Filament
by: Marzuki, et al.
Published: (2024)

Neph-ex: a 3D printed interventional radiology training tool for nephrostomy exchange
by: Ch'ng, et al.
Published: (2024)

Investigation of Mechanical Properties of 3D Printed Biodegradable Polylactic Acid Reinforced with Paper Microcrystalline Cellulose
by: Anto T.; Rajendran R.C.; Agarwal A.; Jayamani E.; Natarajan V.D.
Published: (2024)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
by: Yang Z.; Lu K.; Zhao Y.; Shi X.; Mao W.; Zheng B.; Xu Y.; Gao P.; Zhou R.
Published: (2024)

The Effect of Temperature on the 3D Printed Mold using Polyethylene Terephthalate Glycol (PETG), Polylactic Acid (PLA) and Stereolithography (SLA)
by: Noordin A.A.M.; Burham N.; Yaakub T.N.T.; Aziz A.A.; Masrie M.
Published: (2023)

COMPARISON STUDY ON MECHANICAL PROPERTIES OF 3D PRINTED PLA AND PLA/ALUMINIUM COMPOSITES USING FUSED DEPOSITION MODELING METHOD
by: Sukindar N.A.; Shaharuddin S.I.S.; Kamruddin S.; Azhar A.Z.A.; Choong Y.C.; Samsudin N.M.
Published: (2022)

Influence of Pre-Sputtering Technique on Material Properties of BST Thin Films for Tunable Microwave Applications
by: Jamaluddin F.W.; Khalid M.F.A.; Zoolfakar A.S.; Mamat M.H.; Mohd Nasir N.F.
Published: (2020)

3-D versus 2-D animation in multimedia application: Is the extra effort worth it?
by: Rias R.M.; Badioze Zaman H.
Published: (2011)

3D accident reconstruction using low-cost imaging technique
by: Osman M.R.; Tahar K.N.
Published: (2016)

Recent development of electrochemically exfoliated graphene and its hybrid conductive inks for printed electronics applications
by: Safitri R.N.; Suriani A.B.; Htwe Y.Z.N.; Muqoyyanah; Dwandaru W.S.B.; Kumar V.V.; Ali K.; Othman M.H.D.; Alluqmani S.M.; Azlan M.N.; Mamat M.H.
Published: (2024)

Improvement of endoclip design using 3D CAD approach
by: Siregar I.; Izham M.I.C.; Ariffin A.C.; Adenan M.S.; Saedon J.B.
Published: (2020)

A Conceptual Framework for 3D Hologram Talking-Head Character Design
by: Ramlie M.K.; Mohamad Ali A.Z.; Aziz M.N.A.; Ibrahim N.H.
Published: (2023)

The Application of Technological Intervention for Stroke Rehabilitation in Southeast Asia: A Scoping Review With Stakeholders' Consultation
by: Selamat S.N.S.; Che Me R.; Ahmad Ainuddin H.; Salim M.S.F.; Ramli H.R.; Romli M.H.
Published: (2022)

Outlier detection in logistic regression and its application in medical data analysis
by: Ahmad S.; Ramli N.M.; Midi H.
Published: (2012)

Review of recent advances in piezoelectric material for nanogenerator application: preparation methods, material selection, performance, applications, and future outlook
by: Mohamed Mustakim N.S.; Kamaruzaman D.; Abdullah M.H.; Malek M.F.; Parimon N.; Ahmad M.K.; Abu Bakar S.; Vasimalai N.; Ramakrishna S.; Mamat M.H.
Published: (2024)

AN ANALYSIS OF THE STATUS AND TREND OF VISUALIZATION RESEARCH IN 3D FASHION DESIGN
by: Zifei L.; Aris A.B.; Ziwei Z.; Nor Z.B.M.
Published: (2024)

A systematic review on employing thermochemical techniques for the production of exceptionally efficient biochar from discarded disposable diapers (D3)
by: Iskandar Shah D.R.S.; Ramli F.F.; Anuar N.F.; Wan Daud W.M.A.; Aghamohammadi N.
Published: (2024)

Progress in etching-driven MXene synthesis and utilization in conductive inks for printed electronics applications: A comprehensive review
by: Htwe Y.Z.N.; Bakar S.A.; Mohamed A.; Muqoyyanah; Othman M.H.D.; Mamat M.H.; Ahmad M.K.; Azis M.N.A.; Nuryadi R.; Ramakrishna S.; Salah N.; Alshahrie A.
Published: (2024)