Natural Frequencies Optimisation of Hybrid Composite Laminates using Response Surface Method

QR Code

Natural Frequencies Optimisation of Hybrid Composite Laminates using Response Surface Method

Natural frequency is an important property in designing structures, as resonance can induce catastrophic failure. Nevertheless, the vibration behaviour of hybrid composite laminates due to the hybridisation has still not been fully understood. This study aims to analyse and optimise the natural freq...

Full description

Bibliographic Details
Published in:	Journal of Advanced Research in Applied Sciences and Engineering Technology
Main Author:	Rosaidi M.H.M.; Mahmud J.; Rahman S.M.A.; Halim N.H.A.; Abdullah R.I.R.; Patar M.N.A.A.
Format:	Article
Language:	English
Published:	Semarak Ilmu Publishing 2023
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85168141171&doi=10.37934%2faraset.31.2.197209&partnerID=40&md5=e72cc5adfb818adddca1e5287ff61c55

Similar Items

Optimisation of Rheological Properties of Water-Based Mud (WBM) with Natural Additives by Using Response Surface Methodology (RSM)
by: Abdul Halim A.; Nurul Aimi G.; Shareena Fairuz A.M.; Omar Syah J.E.; Nureen Ilyana H.
Published: (2023)

Development of a quantitative assessment system for upper limb motor disorder in occupational therapy
by: Patar M.N.A.A.; Lee H.; Mahmud J.; Patar A.
Published: (2018)

Model-based systems engineering of a hand rehabilitation device
by: Patar M.N.A.A.; Komeda T.; Yee L.C.; Mahmud J.
Published: (2015)

Detection of Micro-defects on Metal Screw Surfaces Based on Faster Region-Based Convolutional Neural Network
by: Patar M.N.A.A.; Ayub M.A.; Zainal N.A.; Rosly M.A.; Lee H.; Hanafusa A.
Published: (2022)

Effect of Angle Ply on Tensile Strength of Unidirectional Glass/Epoxy and Arenga Pinnata/Epoxy Hybrid Composite Laminate
by: Said J.M.; Jumahat A.; Mahmud J.
Published: (2023)

Evaluating the Structural Response of Ceramic-Metal Laminate under Ballistic Impact
by: Meon M.S.; Delfrin M.Q.; Saedon J.
Published: (2024)

Estimating Rotational Frequency Response Function Using Mode Expansion and Frequency Response Function Synthesis Method
by: Mirza W.I.I.W.I.; Rani M.N.A.; Yunus M.A.; Stancioiu D.; Shripathi V.
Published: (2021)

Natural Frequency of Lightweight Composite Slabs Based on Experimental Study and Numerical Modelling
by: Jaini Z.M.; Sugiura K.; Kudus S.A.; Rum R.H.M.; Hakim S.J.S.; Ghafar N.H.A.
Published: (2023)

OSC9: Colour Stability and Matching Accuracy of Custom Dual Laminated Composite Resin Shade Guide
by: Kassim M.Z.; Rahimi S.N.; Berhanuddin M.A.; Ghani S.M.A.; Lim T.W.
Published: (2018)

Mathematical modelling of canola oil biodegradation and optimisation of biosurfactant production by an antarctic bacterial consortium using response surface methodology
by: Zahri K.N.M.; Khalil K.A.; Gomez-Fuentes C.; Zulkharnain A.; Sabri S.; Convey P.; Lim S.; Ahmad S.A.
Published: (2021)

Frequency Based Substructuring and Coupling Enhancement Using Estimated Rotational Frequency Response Functions
by: Mirza W.I.I.W.I.; Kyprianou A.; da Silva T.A.N.; Rani M.N.A.
Published: (2024)

Particle swarm optimisation of mel-frequency cepstral coefficients computation for the classification of asphyxiated infant cry
by: Zabidi A.; Mansor W.; Lee Y.K.; Mohd Yassin A.I.; Sahak R.
Published: (2010)

Experimental-numerical analysis of woven laminates under tension
by: Zainal Abidin N.A.; Mohd Jailani M.Z.H.; Hussain A.K.; Mahmud J.
Published: (2020)

Failure analysis of boron/epoxy composite laminates with square cutouts in various size under uniaxial tension
by: Zulkifli M.A.A.; Halim Z.I.A.; Norbani N.A.S.; Mahmud J.
Published: (2021)

Force sensor detection and performance evaluation of new active system ankle foot orthosis
by: Hamid A.; Patar M.N.A.A.; Ayub M.A.
Published: (2012)

The use of response surface methodology as a statistical tool for the optimisation of waste and pure canola oil biodegradation by antarctic soil bacteria
by: Zahri K.N.M.; Zulkharnain A.; Gomez-Fuentes C.; Sabri S.; Khalil K.A.; Convey P.; Ahmad S.A.
Published: (2021)

A Review on Mechanical Properties and Response of Fibre Metal Laminate under Impact Loading (Experiment)
by: Awi M.; Abdullah A.S.
Published: (2023)

Extraction optimisation and characterisation of Artocarpus integer peel pectin by malonic acid-based deep eutectic solvents using response surface methodology
by: Wan Chik M.A.; Yusof R.; Shafie M.H.; Mohamed Hanaphi R.
Published: (2024)

Walking Gait Analysis: Kinovea versus Motion Capture System
by: Yusof Y.; Hisham N.A.H.; Patar M.N.A.A.; Le C.H.; Mahmud J.; Lee H.; Yamamoto S.; Herawati L.
Published: (2022)

Optimisation of the corrosion inhibition performance of isatin 4-ethyl-3-thiosemicarbazone for mild steel in sulfuric acid medium using response surface methodology
by: Mansor M.A.A.; Zainal Abidin N.A.; Yasin Y.; Sheikh Mohd Ghazali S.A.I.; Dzulkifli N.N.
Published: (2024)

Microwave-Assisted Pyrolysis of Oil Palm Biomass: Multi-Optimisation of Solid Char Yield and Its Calorific Value Using Response Surface Methodology
by: Idris S.S.; Rahman N.A.; Ismail K.; Mohammed Yunus M.F.; Mohd Hakimi N.I.N.
Published: (2022)

Bamboo and Glass Fibre Hybrid Laminated Composites as Locking Compression Plate (LCP) for Tibia Fracture Treatment
by: Shuib S.; Faiqa Ismail N.; Nazif Nazri M.; Zafir Romli A.
Published: (2019)

Optimisation of Mangosteen Peel Extracts (Garcinia mangostana L.) on Total Flavonoid Content Using Response Surface Methodology (RSM) and Its Antioxidant Activities
by: Razila A.; Ramli S.S.
Published: (2021)

Optimisation of biodegradation conditions for cyanide removal by Serratia marcescens strain AQ07 using one-factor-at-a-time technique and response surface methodology
by: Karamba K.I.; Ahmad S.A.; Zulkharnain A.; Syed M.A.; Khalil K.A.; Shamaan N.A.; Dahalan F.A.; Shukor M.Y.
Published: (2016)

Optimisation of Nitrogen Plasma Exposure Time for Surface Modification of Cotton Fibre
by: Abd Hair A.H.; Salleh K.M.; Nyak Mazlan N.S.; Khairunnisa-Atiqah M.K.; Purhanudin N.; Mohd Akhiri A.S.; Zakaria S.; Awang R.
Published: (2024)

NONLINEAR FREQUENCY RESPONSE FUNCTION APPLYING THE RESPONSE-CONTROLLED STEPPED-SINE TESTING (RCT) IN MSC NASTRAN
by: Konstantinos R.; Andreas K.; Rahim B.A.; Norhisham A.R.M.
Published: (2023)

Natural Frequency of Lightweight Composite Slabs Based on Experimental Study and Numerical Modelling
by: Jaini, et al.
Published: (2023)

Natural Frequency of Lightweight Composite Slabs Based On Experimental Study and Numerical Modelling
by: Jaini, et al.
Published: (2023)

Failure analysis of woven kevlar/epoxy composite laminates under compression due to variations in fiber orientation
by: Mali M.; Hussain A.K.; Muzafar M.A.; Zainol A.F.M.; Mahmud J.
Published: (2019)

Three-dimensional particle swam optimisation of Mel Frequency Cepstrum Coefficient computation and multilayer perceptron neural network for classifying asphyxiated infant cry
by: Zabidi A.; Mansor W.; Khuan L.Y.; Yassin I.M.; Sahak R.
Published: (2011)

Thermal Stability, Dynamic Mechanical Analysis and Flammability Properties of Woven Kenaf/Polyester-Reinforced Polylactic Acid Hybrid Laminated Composites
by: Azlin M.N.M.; Sapuan S.M.; Zuhri M.Y.M.; Zainudin E.S.; Ilyas R.A.
Published: (2022)

Evaluation of conventional and response surface level optimisation of n-dodecane (n-C12) mineralisation by psychrotolerant strains isolated from pristine soil at Southern Victoria Island, Antarctica
by: Habib S.; Ahmad S.A.; Johari W.L.W.; Shukor M.Y.A.; Alias S.A.; Khalil K.A.; Yasid N.A.
Published: (2018)

Human Comfort Assessment of Vibration Behaviour of Office Floors: Before and After Strengthening Using the Laminated Elastomeric Bearing
by: Ghafar N.H.A.; Rahimi M.I.; Goh L.D.
Published: (2022)

Analytical Study on the Resonance Frequency of Tunable Surface-Wave-Excited Plasma Antennas
by: Dorbin M.-R.; Horestani A.K.; Sadeghikia F.; Noghani M.T.; Jaafar H.
Published: (2022)

The Effects of Diamond Cutout Size and Fibre Orientation on the Failure Behaviour of Graphite Epoxy and Glass Epoxy Composite Laminates
by: Yusof Y.; Norazllan M.Z.; Azman N.A.N.; Mahmud J.
Published: (2022)

The effects of open hole and fiber orientation on Kevlar/Epoxy and Boron/Epoxy composite laminates under tensile loading
by: Azmi N.N.; Mohd Radi M.B.A.; Muhammad Taufik M.H.N.; Adnan N.; Minhuaazam L.N.; Mahmud J.
Published: (2023)

Encapsulation of Bifidobacterium pseudocatenulatum Strain G4 within Bovine Gelatin-Genipin-Sodium Alginate Combinations: Optimisation Approach Using Face Central Composition Design-Response Surface Methodology (FCCD-RSM)
by: Khalil K.A.; Mustafa S.; Mohammad R.; Bin Ariff A.; Ahmad S.A.; Dahalan F.A.; Abdul Manap M.Y.
Published: (2019)

PCL/Gelatin/Graphene Oxide Electrospun Nanofibers: Effect of Surface Functionalization on In Vitro and Antibacterial Response
by: Hamdan N.; Khodir W.K.W.A.; Hamid S.A.; Nasir M.H.M.; Hamzah A.S.; Cruz-Maya I.; Guarino V.
Published: (2023)

Effect of stacking sequence and fiber content on mechanical and morphological properties of woven kenaf/polyester fiber reinforced polylactic acid (PLA) hybrid laminated composites
by: Azlin M.N.M.; Sapuan S.M.; Zuhri M.Y.M.; Zainudin E.S.
Published: (2022)

Enhancing Squeezing over Two Octaves of Frequency Difference
by: Julius R.; Alias A.N.; Abd Halim M.S.
Published: (2023)