Factorial Design for Optimization and Performance Evaluation of Palm Oil Mill Effluent (POME) using Electrocoagulation

QR Code

Factorial Design for Optimization and Performance Evaluation of Palm Oil Mill Effluent (POME) using Electrocoagulation

The palm oil industry needs a more effective method to treat palm oil mill effluent (POME) before being released into the river without polluting the environment. Thus, the best possible solution for treating POME is using electrocoagulation. This study focused on the factorial experimental design f...

Full description

Bibliographic Details
Published in:	Biointerface Research in Applied Chemistry
Main Author:	Kasmuri N.; Kasim Z.; Aziz A.A.; Ismail N.A.; Zait M.S.A.
Format:	Article
Language:	English
Published:	AMG Transcend Association 2023
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85153083702&doi=10.33263%2fBRIAC136.564&partnerID=40&md5=0989825e5f2c686db841f8b8e098964b

Similar Items

Electrocoagulation system for palm oil mill effluent
by: Maizan M.S.; Saparon A.; Sulaiman S.
Published: (2024)

The potential of treated palm oil mill effluent (Pome) sludge as an organic fertilizer
by: Khairuddin M.N.; Zakaria A.J.; Isa I.M.; Jol H.; Nazri Wan Abdul Rahman W.M.; Salleh M.K.S.
Published: (2016)

Sustainable treatment of palm oil mill effluent (POME) by using Pectin and chitosan in jar test protocol - sequential comparison
by: Kamaruddin M.A.; Ismail N.; Kuen T.H.; Alrozi R.
Published: (2018)

Palm oil mill effluent's microbial fuel cell's optimisation procedure by using two-level factorial design method and chemical oxygen demand treatment
by: Alkhair K.B.; Hassan O.H.; Mohamed S.A.S.; Andrew Y.K.C.; Rahman Z.A.; Yahya M.Z.A.
Published: (2018)

Presence of Residual Oil in Relation to Solid Particle Distribution in Palm Oil Mill Effluent
by: Sharifudin W.S.S.A.W.; Sulaiman A.; Mokhtar N.; Baharuddin A.S.; Tabatabaei M.; Busu Z.; Subbian K.
Published: (2015)

Shear strength and root length density analyses of entisols treated with palm oil mill effluent sludge
by: Khairuddin M.N.; Md Isa I.; Zakaria A.J.; Jol H.; Syahlan S.
Published: (2017)

Physico-Chemical characteristics of palm oil mill effluent anaerobic sludge as a potential bio-derived fuel
by: Sukor M.Z.; Jamaludin S.I.S.; Sanusi S.N.A.; Muhamad S.H.A.; Samah N.A.A.
Published: (2024)

Effective Microorganisms Delignification of Empty Fruit Bunch as Co-Substrate in Palm Oil Mill Effluent Anaerobic Digestion
by: Katon M.A.F.; Prabowo W.; Anggoro T.; Hastuti Z.D.; Rachman R.M.; Kadir H.A.; Sugeng D.A.
Published: (2024)

Characterization of waste clay from palm oil mill effluent and enzyme immobilization study for cassava saccharification process
by: Edama N.A.; Sulaiman A.; Abd-Rahim S.N.; Ku Hamid K.H.; Busu Z.
Published: (2014)

Removal behaviour of residual pollutants from biologically treated palm oil mill effluent by Pennisetum purpureum in constructed wetland
by: Ujang F.A.; Roslan A.M.; Osman N.A.; Norman A.; Idris J.; Farid M.A.A.; Halmi M.I.E.; Gozan M.; Hassan M.A.
Published: (2021)

Enhanced Biogas Production from Palm Oil Mill Effluent Supplemented with Untreated Oil Palm Empty Fruit Bunch Biomass with a Change in the Microbial Community
by: Mohd Ali A.A.; Mohd Zainudin M.H.; Idris A.; Baharuddin A.S.; Sulaiman A.; Matsui T.; Osaka N.; Oshibe H.; Mohd Hassan M.A.; Shirai Y.
Published: (2012)

Sustainable photodegradation of pharmaceuticals: KOH-impregnated palm oil mill effluent sludge biochar-BiOBr nanocomposite for wastewater treatment
by: Abdul-Raheem M.N.; Ahmad M.A.; Yusop M.F.M.; Hassan O.H.; Baidurah S.; Olajide O.A.; Adnan R.; Sagadevan S.; Kaus N.H.M.
Published: (2024)

Analysis of POME Discharge Quality from Different Mill in Perak, Malaysia: A case study
by: Sapie S.; Jumali S.S.; Mustaffha S.; Pebrian D.E.
Published: (2019)

The effect of higher sludge recycling rate on anaerobic treatment of palm oil mill effluent in a semi-commercial closed digester for renewable energy
by: Sulaiman A.; Busu Z.; Tabatabaei M.; Yacob S.; Abd-Aziz S.; Hassan M.A.; Shirai Y.
Published: (2009)

Application of artificial neural network to predict water flux from pre-treated palm oil mill effluent using direct contact membrane distillation
by: Idris I.; Ahmad Z.; Roslee Othman M.; Sholahudin Rohman F.; Ilyas Rushdan A.; Azmi A.
Published: (2022)

Reduction of POME final discharge residual using activated bioadsorbent from oil palm kernel shell
by: Zainal N.H.; Aziz A.A.; Idris J.; Jalani N.F.; Mamat R.; Ibrahim M.F.; Hassan M.A.; Abd-Aziz S.
Published: (2018)

Factorial design approach to microwave dissolution
by: Mohd A.A.; Dean J.R.; Tomlinson W.R.
Published: (1992)

Reduction of Microplastic in Wastewater Via Electrocoagulation Process
by: Kasmuri N.; Rosli M.S.; Zaini N.; Nayono S.E.
Published: (2024)

Sustainability practices of palm oil mills in the FELDA Sahabat region
by: Anam M.S.H.; Sulaiman A.; Othman A.K.; Jamaludin N.F.
Published: (2024)

Performance of solar photocatalysis and photo-fenton degradation of palm oil mill effluent; [Prestasi fotopemangkinan dan degradasi foto-fenton menggunakan sinar suria ke atas efluen kilang minyak kelapa sawit]
by: Kanakaraju D.; Ahmad N.L.B.; Sedik N.B.M.; Long S.G.H.; Guan T.M.; Chin L.Y.
Published: (2017)

The Efficacy of Activated Carbon from Organic Waste in Treating Wastewater Effluent
by: Japri D.; Kasmuri N.; Zaini N.; Hamid K.A.; Nayono S.E.; Mojiri A.
Published: (2024)

Potential of Fenugreek and Cowpea Seeds as Natural Coagulants for Wastewater Effluent Treatment
by: Nasir S.N.F.S.; Kasmuri N.; Zaini N.; Hamid K.A.; Mojiri A.; Ismail N.A.
Published: (2024)

Analysis of Biogas Production from Biomass Residue of Palm Oil Mills using an Anaerobic Batch Test
by: Kamal N.A.; Osman S.N.; Wahid M.A.; Yeol L.D.
Published: (2021)

Effects of different palm oil mill sludge cake rates on the growth and yield of okra (Abelmoschus esculentus)
by: George N.B.J.; Merali M.M.; Sahmat S.S.; Yusop Z.; Aziz A.S.A.; Kamil M.Z.
Published: (2024)

Heavy metals reduction using electrocoagulation in enhancing the water quality near unlined landfill: A case study
by: Kasmuri N.; Adnan N.; Ahmad R.; Santiagoo R.; Ramasamy S.
Published: (2021)

Factorial Design Analysis of a Tapioca Slurry Saccharification Process Using Encapsulated Enzymes
by: Abd-Rahim S.N.; Sulaiman A.; Edama N.A.; Baharuddin A.S.; Mokhtar M.N.
Published: (2014)

POME: An Alternative Nutrient Source for Bio-Organic Plant Tissue Culture Media
by: Nadirah M.N.A.; Awal A.; Azma Y.N.; Sulaiman A.
Published: (2019)

FeCl3-Induced Oxidation of POME for Efficient Treatment: An Experimental Study
by: Ali M.H.M.; Jalil M.N.; Zain Z.M.; Chay T.C.; Zaki H.M.
Published: (2024)

Preparation of n-doped biochar from palm oil mill sludge and urea for peroxydisulfate (PDS) activation: A kinetic study
by: Karim S.; Sallehuddin A.H.; Zurani F.A.; Idris S.S.; Len K.Y.T.; Ahmad M.A.
Published: (2024)

Lean TQM automotive factory model system
by: Salleh N.A.M.; Kasolang S.; Jaffar A.
Published: (2011)

Chip morphology in ball nose end milling process of nickel-based alloy material under MQL condition
by: Kasim M.S.; Hafiz M.S.A.; Ghani J.A.; Haron C.H.C.; Izamshah R.; Aziz M.S.A.; Mohamad W.N.F.; Wong P.K.; Saedon J.
Published: (2019)

Effect of mass loading and microwave absorber application method on the product from microwave assisted pyrolysis of palm oil mill effluent; [Kesan beban jisim dan aplikasi kaedah penyerap gelombang mikro kepada produk terhasil daripada sisa buangan kilang kelapa sawit melalui proses pirolisis bantuan gelombang mikro]
by: Januri Z.; Idris S.S.; Akhawan H.A.; Rahman N.A.; Matali S.; Manaf S.F.A.
Published: (2017)

Unlocking the potential of Chlamydomonas sp. for sustainable nutrient removal from POME: A biokinetic investigation
by: Mohd N.; Mohd Yasin N.H.; Osman W.H.W.; Takriff M.S.
Published: (2024)

A state-of-the-art review on electrocoagulation (EC): An efficient, emerging, and green technology for oil elimination from oil and gas industrial wastewater streams
by: Kadier A.; Al-Qodah Z.; Akkaya G.K.; Song D.; Peralta-Hernández J.M.; Wang J.-Y.; Phalakornkule C.; Bajpai M.; Niza N.M.; Gilhotra V.; Bote M.E.; Ma Q.; Obi C.C.; Igwegbe C.A.
Published: (2022)

Factorial structure of social media intelligence quotient (SMIQ) scales
by: Ibrahim N.A.B.; Musa R.B.; Adam A.A.B.
Published: (2017)

Investigating job satisfaction using exploratory factor analysis at ABC factory
by: Aziz W.N.H.W.A.; Zulkipli F.; Mohammad Hamzah M.H.; Azhar F.W.; Rahim S.K.N.A.
Published: (2018)

Challenges and conceptual framework to develop heavy-load manipulators for smart factories
by: Le C.H.; Le D.T.; Arey D.; Gheorghe P.; Chu A.M.; Duong X.B.; Nguyen T.T.; Truong T.T.; Prakash C.; Zhao S.-T.; Mahmud J.; Gao J.; Packianather M.S.
Published: (2020)

A brief review of ultrasonic assisted milling of Inconel 718
by: Ngah N.; Kasim M.S.; Ghanesan H.N.; Yusof S.N.A.; Mohamed S.B.; Rahman Z.A.; Izamshah R.; Yusof A.A.; Zakaria M.A.M.
Published: (2024)

Electrocoagulation: Removing colour and COD from simulated and actual batik wastewater
by: Fadzli, et al.
Published: (2024)

Electrocoagulation: Removing colour and COD from simulated and actual batik wastewater
by: Fadzli J.; Puasa S.W.; Nik Him N.R.; Ku Hamid K.H.; Amri N.
Published: (2024)