Design and Analysis of 3D Printed Prosthetic Hand for Symbrachydactyly Patients

QR Code

Design and Analysis of 3D Printed Prosthetic Hand for Symbrachydactyly Patients

A symbrachydactyly is a genetic problem which also synonym as a person with fingerless condition. The patients will have difficulties in daily activities such as to hold an item. To ease the constraints, a customized and patient-specific prosthetic hand is needed with a minimum cost. This project co...

Full description

Bibliographic Details
Published in:	International Exchange and Innovation Conference on Engineering and Sciences
Main Author:	Mazlan M.A.; Fadzil W.F.A.W.; Rashid H.; Abdullah A.H.
Format:	Conference paper
Language:	English
Published:	Kyushu University 2019
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85142673822&partnerID=40&md5=136b477c3f53890717ab6929038730e2

Similar Items

Development of 3D Printed Socket for Transtibial Prosthetic Leg
by: Fadzil W.F.A.W.; Mazlan M.A.; Hanapiah F.A.; Abdullah A.H.
Published: (2019)

Development of Customized Passive Arm Prosthetics by Integrating 3D Printing and Scanning Technology
by: Zulkifli M.F.; Hashim N.M.; Ramlee M.H.; Whulanza Y.; Abdullah A.H.
Published: (2023)

Development of an Artificial Nose Using 3D Printing Technology for Patients with Tumors
by: Abdullah A.H.; Bolhassan N.; Mazlan M.H.; Bahari A.R.; Marwan S.H.
Published: (2024)

A Review of Material, Design, and Techniques in 3D Printing for Medical Applications
by: Ramli M.S.F.; Mazlan M.H.; Takano H.; Abdullah A.H.; Jalil M.H.
Published: (2023)

Effects of Printing Parameters on the Mechanical Strength of Thermoplastics 3D Printed Specimens
by: Mazlan M.A.; Mustar M.F.; Abdullah A.H.; Zakaria N.A.C.; Hashim N.M.; Pangesty A.I.
Published: (2023)

Development of an Artificial Nose Using 3D Printing Technology for Patients with Tumors
by: Abdullah, et al.
Published: (2024)

Hand Gesture to Control a Low Cost 3-D Printed Arm using Android Application
by: Mohd Noor N.M.B.; Musrijan M.M.B.
Published: (2021)

Design for additive manufacturing (DfAM) for hip prosthesis for 3D printing
by: Hamizan N.S.; Shuib S.; Ghani A.R.A.; Abdullah A.H.; Zain M.R.A.M.; Saeid N.H.; Aziz I.
Published: (2023)

3D Metal Printing Using Generative Design and Numerical Computation
by: Taufek T.; Adenan M.S.; Manurung Y.H.P.; Sulaiman S.A.; Zaid N.S.; Romzi N.A.S.
Published: (2021)

Sustainable biomaterials for 3D printing
by: Mohamad D.; Abdullah A.M.; Omar M.
Published: (2023)

3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review
by: Azlin M.N.M.; Ilyas R.A.; Zuhri M.Y.M.; Sapuan S.M.; Harussani M.M.; Sharma S.; Nordin A.H.; Nurazzi N.M.; Afiqah A.N.
Published: (2022)

SURF based 3D object recognition for robot hand grasping
by: Remeli N.H.; Shauri R.L.A.; Yahaya F.H.; Salleh N.M.; Nasir K.; Yassin A.I.M.
Published: (2017)

Design & Development of Adjustable Handheld 3D Scanner Jig
by: Abdullah A.H.; Yusof M.H.; Hamid A.H.A.; Noh M.H.M.; Mazlan M.A.; Rashid H.
Published: (2022)

Parametric study on the stress behaviour of 3D printed PLA plate with hole
by: Kuntjoro W.; Jalil A.M.H.B.A.; Redzuan A.N.B.A.; Nasir R.E.B.M.
Published: (2023)

DEVELOPMENT OF TENODESIS GRIP ENHANCE ORTHOSIS (T-GEO) USING 3D PRINTING TECHNOLOGY
by: Shukor S.; Hashim N.M.; Zakaria N.A.C.; Abdullah A.H.
Published: (2021)

The Application of Conjugate Gradient Methods to Optimize 3D Printed Parameters
by: Hajar N.; ‘aini N.; Shapiee N.; Rivaie M.; Samsudin A.; Hussin N.H.; Anuar S.H.H.
Published: (2024)

Plant oil body as an effective improver for surimi-based 3D printing
by: Yang R.; Bao L.; Liu Y.; Liang J.; Zheng B.; Miao W.; Shi X.; Gao P.; Zhou R.; Zhao Y.
Published: (2024)

Effects of Material Properties in Developing the Ear Prosthetics
by: Abdullah A.H.; Noordin M.N.A.M.; Ahmad S.; Manan N.F.A.; Marwan S.H.
Published: (2024)

Recent advancement on polyamide composites as an alloplastic alternative in 3D printing for craniofacial reconstruction
by: Abdullah A.M.; Omar M.; Mohamad D.
Published: (2024)

Three-Dimensional (3D) Printing in the Case of a Concurrent Polyp and an Ectopic Tooth
by: Rajendram, et al.
Published: (2024)

Initial Study on Rheological Behaviour of Hydroxyapatites/Polylactic Acid Composite for 3D Printing Filament
by: Marzuki A.P.; Nasir M.A.M.; Salleh F.M.; Ismail M.H.; Murat B.I.S.; Ibrahim M.
Published: (2024)

Self-sanitizing reusable glove via 3D-printing and common mold making method
by: Sadasivuni K.K.; Maurya M.R.; Houkan M.T.; Cabibihan J.-J.; Geetha M.; Al-Maadeed S.; Omar H.; Asnida Asli N.
Published: (2023)

Effects of different heat-induced setting methods on the structural stability and properties of 3D-printed surimi gels
by: Yang Z.; Lu K.; Zhao Y.; Shi X.; Mao W.; Zheng B.; Xu Y.; Gao P.; Zhou R.
Published: (2024)

Initial Study on Rheological Behaviour of Hydroxyapatites / Polylactic Acid Composite for 3D Printing Filament
by: Marzuki, et al.
Published: (2024)

Neph-ex: a 3D printed interventional radiology training tool for nephrostomy exchange
by: Ch'ng, et al.
Published: (2024)

Resistive-based Sensor System for Prosthetic Fingers Application
by: Zainuddin N.; Anuar N.F.; Mansur A.L.; Fauzi N.I.M.; Hanim W.F.; Herman S.H.
Published: (2015)

Investigation of Mechanical Properties of 3D Printed Biodegradable Polylactic Acid Reinforced with Paper Microcrystalline Cellulose
by: Anto T.; Rajendran R.C.; Agarwal A.; Jayamani E.; Natarajan V.D.
Published: (2024)

Post-hemimaxillectomy rehabilitation as a conservative prosthetic design to enhance functionality: A case report
by: AlTarawneh H.M.D.; Buzayan M.M.
Published: (2024)

Translation and validation of the Malay version of modified orthotics and prosthetics users' survey
by: Hashim N.M.; Che Daud A.Z.; Ibrahim A.H.; Ab Majid M.H.; Mohd Ghazali M.N.; Abdul Razak M.M.; Mohd Rusli M.R.
Published: (2024)

Static Structural Analysis on Different Topology Optimization Transtibial Prosthetic Socket Leg
by: Norli M.H.M.; Sukimi A.K.A.; Ramlee M.H.; Mahmud J.; Abdullah A.H.
Published: (2024)

Design and control of a multifingered anthropomorphic robotic hand
by: Jaffar A.; Bahari M.S.; Low C.Y.; Jaafar R.
Published: (2011)

COMPARISON STUDY ON MECHANICAL PROPERTIES OF 3D PRINTED PLA AND PLA/ALUMINIUM COMPOSITES USING FUSED DEPOSITION MODELING METHOD
by: Sukindar N.A.; Shaharuddin S.I.S.; Kamruddin S.; Azhar A.Z.A.; Choong Y.C.; Samsudin N.M.
Published: (2022)

Integrating AI-Driven Robust Control Algorithm with 3D Hand Gesture Recognition to Track an Underactuated Quadrotor Unmanned Aerial Vehicle (QUAV)
by: Al-Shayeb I.E.; Abro G.E.M.; Khan F.S.; Boudville R.; Abdallah A.M.
Published: (2024)

Hand dominance effect during right (Accelerator) throttle gripping in riding simulation
by: Nasir N.; Azmi A.H.; Rashid H.
Published: (2018)

Translation and validation of the Malay version of modified orthotics and prosthetics users' survey
by: Hashim, et al.
Published: (2024)

Improvement of endoclip design using 3D CAD approach
by: Siregar I.; Izham M.I.C.; Ariffin A.C.; Adenan M.S.; Saedon J.B.
Published: (2020)

Static Structural Analysis on Different Topology Optimization Transtibial Prosthetic Socket Leg
by: Norli, et al.
Published: (2024)

AN ANALYSIS OF THE STATUS AND TREND OF VISUALIZATION RESEARCH IN 3D FASHION DESIGN
by: Zifei L.; Aris A.B.; Ziwei Z.; Nor Z.B.M.
Published: (2024)

Preliminary study of melt flow index of recycled Polyethylene Terephthalate/Empty fruit bunch (rPET/EFB) composite as a potential biodegradable 3D printing filament
by: Akhbar S.; Nik Omar N.S.N.; Mohd Yusof A.N.; Mohd Alauddin S.; Kamarrudin N.
Published: (2023)

The Design of Mobile 3D Augmented Reality on Marker Visual Inspection Mask
by: Adenan A.R.; Kassim M.; Kamaluddin N.A.
Published: (2022)