Thermal and Flow Analysis of Stainless Steel and Alumina Feedstock Used for 2C-PIM Process

QR Code

Thermal and Flow Analysis of Stainless Steel and Alumina Feedstock Used for 2C-PIM Process

Within this research, rheological analysis and thermal properties of two component feedstock based on ceramic and metallic powders are carried out to understand their flow behaviour. Scanning electron microscopy (SEM), Differential Scanning Calorimeter (DSC), Thermogravimetric (TGA) and Capillary Rh...

Full description

Bibliographic Details
Published in:	Journal of Mechanical Engineering
Main Author:	Morni M.F.; Ismail M.H.; Nor N.H.M.; Mamat A.
Format:	Article
Language:	English
Published:	UiTM Press 2022
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85138633868&doi=10.24191%2fjmeche.v19i3.19798&partnerID=40&md5=c908a263eaacf9a9240ed9c30eb1e8f2

Similar Items

Feedstock flow characterization and processing of porous niti by metal injection moulding (MIM)
by: Ismail M.H.; Nor N.H.M.; Davies H.A.; Todd I.
Published: (2015)

Structural development of expanded austenite on duplex stainless steel by low temperature thermochemical nitriding process
by: Paijan L.H.; Berhan M.N.; Adenan M.S.; Yusof N.F.M.; Haruman E.
Published: (2012)

Numerical computation for prediction of grain growth on stainless steel 316L
by: Muhammad N.; Manurung Y.H.P.; Mat M.F.; Abdul Ghani M.S.; Graf M.; Adams T.-E.; Kassim K.; Adenan S.
Published: (2020)

Single and double shot blasting treatment of 304 stainless steel
by: Khairulmaini M.; Alias S.K.; Abdullah B.; Said J.M.; Sulong N.; Mazni M.; Jenal N.
Published: (2015)

Cobalt-nickel-iron nanoparticles coated on stainless steel substrate
by: Resali N.A.; Hyie K.M.; Berhan M.N.; Salleh Z.; Kasolang S.
Published: (2013)

Optical band gap and surface morphology of AlN thin-film sputtered by HiPIMS on glass substrate
by: Azman Z.; Nayan N.; Othman N.A.; Bakar A.S.A.; Mamat M.H.; Yusop M.Z.M.; Ahmad M.Y.
Published: (2023)

NUMERICAL SIMULATION ON THE BEHAVIOR OF CELLULAR STAINLESS-STEEL BEAM (CSSB) AT ELEVATED TEMPERATURE
by: Yansai A.R.; Wahid N.; Pin L.H.; Zakwan F.A.A.; Ismail R.; Dee G.L.Y.N.; Ahmad H.
Published: (2024)

The Effect of H2S Pressure on the Formation of Multiple Corrosion Products on 316L Stainless Steel Surface
by: Shah M.; Ayob M.T.M.; Rosdan R.; Yaakob N.; Embong Z.; Othman N.K.
Published: (2020)

Corrosion Behavior of AISI 316L Stainless Steel in a Highly Sour Environment
by: Shah M.; Yaakob N.; Ayob M.T.M.; Othman N.K.
Published: (2022)

The characteristic of Cobalt-nickel-iron alloy coating coated on aluminium, brass and stainless steel
by: Masdek N.R.N.M.; Salleh Z.; Abu M.Z.
Published: (2018)

MORPHOLOGICAL BEHAVIOR OF FEB AND FE2B IN BORIDE LAYER OF 304 STAINLESS STEEL UNDER DIFFERENT MEDIUM
by: Abdullah B.; Alias S.K.; Latif M.N.H.A.; Ahmad N.; Sulaiman S.A.; Rahmat S.N.
Published: (2022)

Effect of Hydrogen Sulfide and Chloride on the Passive Film Structures of Stainless Steel Type 316L
by: Shah M.; Ayob M.T.M.; Yaakob N.; Embong Z.; Othman N.K.
Published: (2023)

Investigation of Corrosion Rate of AISI 316L Stainless Steel in Tropical Fruit Juice Environment
by: Yusuf Y.B.; Yunadi N.A.; Omar N.I.; Mustafa N.; Bakar I.A.A.
Published: (2024)

Influence of Remaining Oxide on the Adhesion Strength of Supersonic Particle Deposition TiO2 Coatings on Annealed Stainless Steel
by: Omar N.I.; Yusuf Y.; Sundi S.A.B.; Abu Bakar I.A.; Andre Fabiani V.; Abdul Rahim T.; Yamada M.
Published: (2023)

The potential of starch as an eco-friendly binder in injection moulding of 316L Stainless steel for medical devices applications
by: Wahab N.; Omar M.A.; Nordin N.A.; Sauti R.
Published: (2014)

Optimising sintering parameters on the characteristic of injection moulded 316L stainless steel utilising water soluble system
by: Omar N.F.; Wahab N.; Ahmad I.N.; Sulong N.
Published: (2019)

Rheological behavior of Zirconia Added alumina mixture
by: Aziz S.N.A.; Saidi W.S.S.W.; Bakar M.A.A.; Ismail M.H.
Published: (2018)

A comparative study of the tribocorrosion behaviour of low temperature nitrided austenitic and duplex stainless steels in NaCl solution
by: Haruman E.; Sun Y.; Adenan M.S.
Published: (2020)

Comparative corrosion behaviour of austenitic 316L and duplex 2205 stainless steels: microstructure and property evolution at highly partial pressure of H2S
by: Shah M.; Ayob M.T.M.; Yaakob N.; Embong Z.; Othman N.K.
Published: (2022)

Past, present and future development in mathematical modeling for low temperature thermochemical treatments of stainless steels for enhanced surface properties
by: Fanya A.; Haruman E.
Published: (2021)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
by: Ibrahim K.A.; Wu B.; Brandon N.P.
Published: (2016)

Effect of Welding Process to the Porosity Formation in Carbon Steel
by: Ellyana Roslan R.A.; Mohd Ladin L.H.; Mamat S.; Teo P.T.; Abdullah N.H.; Arlina A.; Mohamad F.; Toshifum Y.
Published: (2020)

Multi-Objectives Optimization of Abrasive Water Jet Machining (AJWM) on Mild Steel
by: Halim N.H.A.; Tharazi I.; Salleh F.M.; Morni M.F.; Khalit M.I.; Abdullah M.A.A.
Published: (2024)

A preliminary study into the effect of oxide chemistry on the bonding mechanism of cold-sprayed titanium dioxide coatings on SUS316 stainless steel substrate
by: Omar N.I.B.; Mohamed S.B.; Yusuf Y.B.; Rahim T.B.A.; Mustafa Z.B.; Ismail S.B.; Bakar I.A.B.A.; Selvamani S.
Published: (2022)

Compressive and wear resistance of alumina reinforced Fe-Cr matrix composites
by: Shamsuddin S.; Shamsul B.J.; Hussain Z.; Zainal A.A.
Published: (2013)

Optimization of processing parameters on the controlled growth of c -axis oriented ZnO nanorod arrays
by: Malek M.F.; Mamat M.H.; Musa M.Z.; Saurdi I.; Ishak A.; Alrokayan S.A.H.; Khan H.A.; Rusop M.
Published: (2016)

Numerical Modelling of a Photovoltaic Thermal (PV/T) System Using Nanofluid with Parallel Flow Thermal Absorber
by: Kubenthiran J.; Baljit S.; Tijani A.S.; Baharin Z.A.K.; Remeli M.F.; Ong K.S.
Published: (2021)

Nanomaterials and their role in advancing biodiesel feedstock production: A comprehensive review
by: Hosseinzadeh-Bandbafha H.; Panahi H.K.S.; Dehhaghi M.; Orooji Y.; Shahbeik H.; Mahian O.; Karimi-Maleh H.; Sulaiman A.; Mei C.; Kiehbadroudinezhad M.; Nizami A.-S.; Guillemin G.G.; Lam S.S.; Peng W.; Chen X.; Kim K.-H.; Aghbashlo M.; Tabatabaei M.
Published: (2023)

Synthesis of alumina-CaO-KI catalyst for the production of biodiesel from rubber seed oil; [Sintesis mangkin alumina-CaO-KI untuk penghasilan biodiesel daripada minyak biji getah]
by: Zainal Kifli A.R.; Kamarullah S.H.; Mohd Khazaai S.N.; Maniam G.P.
Published: (2018)

Effect of thermal implying during ageing process of nanorods growth on the properties of zinc oxide nanorod arrays
by: Ismail A.S.; Mamat M.H.; Malek M.F.; Abdullah M.A.R.; Sin M.D.; Rusop M.
Published: (2016)

Investigation of Tensile Test on Back-to-Back Web Connection of Cold-Formed Steel C-Section
by: Muhammad Alif I.R.; Kamarudin A.F.; Seyed Hakim S.J.; Musa M.K.; Hamid S.; Mohammadhasani M.; Rathomy Romeli M.A.
Published: (2024)

A voltammetric immunosensor based on a nanoporous alumina millirod for detection of porcine serum albumin
by: Mahmud A.H.; Salahuddin N.M.; Md Jani A.M.; Abu Bakar N.F.; Zainal Abidin S.A.S.; Mohd Zain Z.; Low K.-F.
Published: (2023)

Fabrication of MoS2–rGO and MoS2–ZIF-8 membranes supported on flat alumina substrate for effective oil removal
by: Othman N.H.; Fuzil N.S.; Alias N.H.; Shahruddin M.Z.; Shayuti M.S.M.; Lau W.J.; Ismail A.F.; Abidin S.Z.; Sulaiman S.; Kusworo T.D.
Published: (2022)

Facile synthesis of nanosized La/ZrO2 catalysts for ketonization of free fatty acid and biomass feedstocks
by: Zaidi S.; Asikin-Mijan N.; Hussain A.S.; Mastuli M.S.; Alharthi F.A.; Alghamdi A.A.; Taufiq-Yap Y.H.
Published: (2021)

Thermal annealing-induced formation of ZnO nanoparticles: Minimum strain and stress ameliorate preferred c-axis orientation and crystal-growth properties
by: Malek M.F.; Mamat M.H.; Musa M.Z.; Khusaimi Z.; Sahdan M.Z.; Suriani A.B.; Ishak A.; Saurdi I.; Rahman S.A.; Rusop M.
Published: (2014)

Characteristics of Biopellets Manufactured from Various Lignocellulosic Feedstocks as Alternative Renewable Energy Sources
by: Putra A.R.; Iswanto A.H.; Nuryawan A.; Darmawan S.; Madyaratri E.W.; Fatriasari W.; Hua L.S.; Antov P.; Manurung H.; Pendi A.P.A.S.H.
Published: (2024)

Effect of segregation of a polyacrylic acid (PAA) binder on the green strength of dry-pressed alumina compacts
by: Imran Zainuddin M.; Tanaka S.; Uematsu K.
Published: (2008)

Fabrication of lanthanum-based perovskites membranes on porous alumina hollow fibre (AHF)substrates for oxygen enrichment
by: Sihar A.S.; Othman N.H.; Alias N.H.; Shahruddin M.Z.; Asghrar Syed-Hassan S.S.; Rahman M.A.; Ismail A.F.; Wu Z.
Published: (2019)

A review on the environmental life cycle assessment of biodiesel production: Selection of catalyst and oil feedstock
by: Srikumar K.; Tan Y.H.; Kansedo J.; Tan I.S.; Mubarak N.M.; Ibrahim M.L.; Yek P.N.Y.; Foo H.C.Y.; Karri R.R.; Khalid M.
Published: (2024)

Metamorphosis of strain/stress on optical band gap energy of ZAO thin films via manipulation of thermal annealing process
by: Malek M.F.; Mamat M.H.; Musa M.Z.; Soga T.; Rahman S.A.; Alrokayan S.A.H.; Khan H.A.; Rusop M.
Published: (2015)