Modeling and Simulation of Additively Manufactured Cylindrical Component Using Combined Thermomechanical and Inherent Strain Method with Nelder-Mead Optimization

QR Code

Modeling and Simulation of Additively Manufactured Cylindrical Component Using Combined Thermomechanical and Inherent Strain Method with Nelder-Mead Optimization

This research concerns on the application of combined thermomechanical - inherent strain method (TMM-ISM) in predicting the distortion of additively manufactured component. The simulation and experimental verification were conducted in the form of vertical cylinder using selective laser melting, whi...

Full description

Bibliographic Details
Published in:	3D Printing and Additive Manufacturing
Main Author:	Taufek T.; Manurung Y.H.P.; Adenan M.S.; Akma S.; Choo H.L.; Louhichi B.; Bednardz M.; Aziz I.
Format:	Article
Language:	English
Published:	Mary Ann Liebert Inc. 2023
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85137006822&doi=10.1089%2f3dp.2021.0197&partnerID=40&md5=ddf32a85b99474145ede9efb90705844

Similar Items

Simulation of Residual Stress and Distortion on Additively Manufactured SS316L Specimens Using Inherent Strain Method
by: Taufek T.; Sulaiman S.A.; Manurung Y.H.P.; Adenan M.S.; Ahmad S.N.
Published: (2021)

Distortion Analysis Method for Wire Arc Additive Manufacturing Component Using Thermomechanical Computation with Enhanced Separation and Deposition Algorithm
by: Prajadhiana K.P.; Taufek T.; Rahaman W.E.W.A.; Manurung Y.H.P.; Adenan M.S.; Mat M.F.; Fuzi M.F.A.B.M.; Nasir M.A.B.M.; Mohamed M.A.; Jamaludin M.F.; Triyono
Published: (2024)

Derivative Proportional – Integral Controller Using Nelder-Mead Optimization for Glycerine Purification Heating Process
by: Janin Z.; Kaidi H.M.; Ahmad R.; Khan S.
Published: (2020)

Development and Analysis of an Optimized Heat Source Model for Wire Arc Additive Manufacturing Using Numerical Simulation
by: Nordin N.; Choo H.L.; Singh A.; Ku P.X.; Manurung Y.H.P.; Mat M.F.; Muhammad N.; Sued M.K.; Manurung C.S.P.
Published: (2024)

3D Metal Printing Using Generative Design and Numerical Computation
by: Taufek T.; Adenan M.S.; Manurung Y.H.P.; Sulaiman S.A.; Zaid N.S.; Romzi N.A.S.
Published: (2021)

Ripple suppression in 300GHz band cylindrical lens
by: Gray D.; Sakakibara K.; Suzuki S.; Ishihara R.; Sugimoto Y.; Kikuma N.; Yamada Y.; Abd Rahman N.H.
Published: (2021)

Optimizing novel multi-scaled simulation method for deviation analysis of generatively designed aileron bracket using laser powder bed fusion
by: Manurung Y.H.P.; Taufek T.; Adenan M.S.; Hussein N.I.S.; Aminallah M.M.; Jamaludin F.I.; Papadakis L.; Sallem H.
Published: (2024)

Design of a cylindrical parabolic reflector on monopole plasma antenna
by: Zali H.M.; Ali M.T.; Pasya I.; Halili N.A.; Ja'Afar H.; Hilmi M.
Published: (2013)

Computer-aided design of insect-repellent formulation with inherent safety assessment
by: Lawrence, et al.
Published: (2023)

Measurement of Cylindrical Lens Antenna for 5G Mobile Base Station
by: Ansarudin F.; Yamada Y.; Rahman N.H.A.; Misran N.
Published: (2024)

Computer-aided design of insect-repellent formulation with inherent safety assessment
by: Lawrence M.J.; Raslan R.; Ab Aziz N.S.
Published: (2024)

Development of inherent safety assessment index for e-waste recycling process: flammability parameter
by: Syaza Izyanni A.; Engku Syifa Hayani E.S.; Mardhati Z.A.; Muhammad Firdaus H.
Published: (2023)

Buckling and Postbuckling Analysis of Stiffened Cylindrical Shells Subjected to Axial Compression and External Pressure
by: Ismail M.S.; Mahmud J.
Published: (2024)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
by: Mohd Mansor M.S.; Raja S.; Yusof F.; Muhamad M.R.; Manurung Y.H.; Adenan M.S.; Hussein N.I.S.; Ren J.
Published: (2024)

Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
by: Mansor, et al.
Published: (2024)

Structural Performance of Ti6Al4V Tibial Tray in Total Knee Arthroplasty (TKA) by Functionally Graded Lattice Structures using Numerical Analysis
by: Rabuan N.; Adenan M.S.; Manurung Y.H.P.; Anuar M.A.M.; Shuib S.
Published: (2023)

Analysis of material property models on WAAM distortion using nonlinear numerical computation and experimental verification with P-GMAW
by: Manurung Y.H.P.; Prajadhiana K.P.; Adenan M.S.; Awiszus B.; Graf M.; Haelsig A.
Published: (2021)

Optimizing novel multi-scaled simulation method for deviation analysis of generatively designed aileron bracket using laser powder bed fusion
by: Manurung, et al.
Published: (2024)

Numerical computation for prediction of grain growth on stainless steel 316L
by: Muhammad N.; Manurung Y.H.P.; Mat M.F.; Abdul Ghani M.S.; Graf M.; Adams T.-E.; Kassim K.; Adenan S.
Published: (2020)

Characteristics of Biopellets Manufactured from Various Lignocellulosic Feedstocks as Alternative Renewable Energy Sources
by: Putra A.R.; Iswanto A.H.; Nuryawan A.; Darmawan S.; Madyaratri E.W.; Fatriasari W.; Hua L.S.; Antov P.; Manurung H.; Pendi A.P.A.S.H.
Published: (2024)

CLIMATE RESPONSIVE DESIGN IN HERITAGE STRUCTURE: AN ANALYSIS ON THE DECORATIVE ARCHITECTURAL COMPONENTS DESIGN OF RUMAH LIMAS BUMBUNG PERAK (RLBP)
by: Choo I.A.H.; Rashid M.S.A.; Jamaludin N.H.; Muhammad A.; Nor O.M.
Published: (2024)

Board diversity and firm value: A study on Malaysian listed firms in manufacturing and non-manufacturing sectors
by: Razali M.W.M.; Yi P.X.; Nordin N.A.; Muhammad A.; Lunyai J.
Published: (2023)

Inventorying the Placement of Carved Components in Traditional Malay House Using Unmanned Aerial Vehicle (UAV): Case Studies of Rumah Limas Bumbung Perak (RLBP)
by: Jamaludin N.H.; Choo I.A.H.; Rashid M.S.A.
Published: (2024)

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition
by: Iswanto A.H.; Manurung H.; Sohail A.; Hua L.S.; Antov P.; Nawawi D.S.; Latifah S.; Kayla D.S.; Kusumah S.S.; Lubis M.A.R.; Osvaldová L.M.; Hussin M.H.; Selvasembian R.; Chen L.W.; Nurcahyani P.R.; Kim N.H.; Fatriasari W.
Published: (2024)

Chained simulation of the welding-forming process in analysing press force and geometrical deformation using non-linear numerical computation with experimental validation
by: Adenan M.S.; Prajadhiana K.P.; Mat M.F.; Manurung Y.H.P.; Ishak D.P.; Adesta E.T.; Colditz P.; Dizon J.R.C.; Mohamed M.A.; Jamaludin M.F.
Published: (2023)

Examining the Components of Integrity
by: Zahari A.I.; Said J.; Arshad R.
Published: (2022)

Prediction of soil anisotropic stress-strain behaviour incorporating shear strength using improvise normalised stress-strain method
by: Rahman A.S.A.; Noor M.J.M.; Jais I.B.M.; Ibrahim A.
Published: (2018)

Effect of artificial ageing temperature in t6-heat treatment on the mechanical properties of dissimilar metals weld between aa5083 and aa6063
by: Setyawan H.; Muhayat N.; Yuliadi M.Z.; Manurung Y.H.P.; Triyono
Published: (2023)

Numerical Analysis of Single Edge Notched Tension Specimen with Fatigue Crack Parameter of Conventional Specimen Using Linear Elastic Fracture Mechanics
by: Busari Y.O.; Abdullah S.; Manurung Y.H.P.; Shuaib-Babata Y.L.
Published: (2021)

Shrinkage test of concrete: Methodology and variation of strain
by: Ibrahim N.
Published: (2020)

Strain Softening Prediction Using Normalized Method
by: Ahmad J.; Md-Noor M.J.; Md-Jais I.B.; Rosli M.I.F.; Abdul-Rahman A.S.; Abdul-Hadi B.
Published: (2019)

Ergonomic interventions in lighting products manufacturing plant
by: Masahuling A.M.; Saman A.M.
Published: (2020)

Sustainable manufacturing 4.0-pathways and practices
by: Gholami H.; Abu F.; Lee J.K.Y.; Karganroudi S.S.; Sharif S.
Published: (2021)

A review of key principles in halal manufacturing
by: Mohamed S.B.; Ab Rashid R.; Abdullah A.H.; Wahab Z.; Ab Rahman H.A.; Mohd A.; Ariffin M.K.A.M.; Ab Aziz W.A.W.; Besar R.
Published: (2016)

Manufacture of Epoxy Resin/Liquid Rubber Blends
by: Ahmad S.B.H.; Abu Bakar M.A.; Yi Y.; Qin Q.
Published: (2014)

Analysis on sustainable manufacturing criteria of automotive industry
by: Jalaludin S.A.; Bakar S.A.
Published: (2021)

Predicting bead geometry of 2F-fillet joint welded by small wire SAW
by: Hamidi S.H.A.; Tham G.; Manurung Y.H.P.; Abas S.K.
Published: (2012)

Volatile Components of Phaeanthus ophthalmicus
by: Salleh W.M.N.H.W.; Salihu A.S.; Ghani N.A.; Abed S.A.
Published: (2024)

Volatile Components of Casearia capitellata
by: Salleh W.M.N.H.W.; Salihu A.S.; Ghani N.A.; Khamis S.
Published: (2024)

Identification of odor components of agarwood
by: Mohamad Ali N.A.; Ismail N.; Jamil M.; Aziz A.; Lias S.; Fazalul Rahiman M.H.; Tai M.N.
Published: (2015)