Atmospheric Pressure Chemical Vapour Deposition Growth of Graphene for the Synthesis of SiO2 Based Graphene Ball; [Pertumbuhan Grafin melalui Endapan Wap Kimia Tekanan Atmosfera untuk Sintesis Bebola Grafin Berasaskan SiO2]

• Published in: Sains Malaysiana
• Main Author: Zulkepli N.; Yunas J.; Mohamed M.A.; Sirat M.S.; Hamzah A.A.
• Format: Article
• Language: English
• Published: Penerbit Universiti Kebangsaan Malaysia 2022
• Online Access: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85136198648&doi=10.17576%2fjsm-2022-5106-27&partnerID=40&md5=414c00a1c71ede85a6dde7ec454ad3a8

Graphene is a prominent carbon nanomaterial with fascinating characteristics such as high conductivity and very high charge carrier mobility at low temperatures. Numerous synthesis methods for graphene have been established. Chemical vapour deposition (CVD) is among the most successful methods to fabricate high-quality graphene. However, metal-catalyzed growth is used in virtually all of the CVD techniques mentioned. To remove these metal catalysts and relocate the graphene to the necessary dielectric substrate (SiO2/Si or quartz), complex and sophisticated post-growth methods must be used, which limits the usage of graphene in practical electronic components. In the present work, we conducted a preliminary study to determine the suitable methane(CH4) flowrate, which could be used to synthesise SiO2 based graphene ball. Few-layer graphene was grown on a large area of copper(Cu) surface using 20 sccm CH4 in atmospheric pressure CVD (APCVD). The influence of CH4 flowrate on graphene growth has been investigated. Graphene was deposited on a metal catalyst substrate at optimum temperatures of 1000 °C. © 2022 Penerbit Universiti Kebangsaan Malaysia. All rights reserved.