Mechanical Properties of Green and Petroleum based Polyurethane as Grouting Materials

QR Code

Mechanical Properties of Green and Petroleum based Polyurethane as Grouting Materials

In this study, polyurethane grouting materials (PUG) were prepared using two different types of polyol which were castor-based polyol (CPUG) and petrochemical-based polyol (PPUG). Four different ratios of polyol (OH) to isocyanate (NCO) were used in this study. The effect of different compositions o...

Full description

Bibliographic Details
Published in:	Journal of Mechanical Engineering
Main Author:	Hussain N.I.A.M.; Bonnia N.N.; Asli N.A.; Ali E.S.; Hassan N.A.; Affandi N.D.N.
Format:	Article
Language:	English
Published:	UiTM Press 2022
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85125715993&doi=10.24191%2fJMECHE.V19I1.19687&partnerID=40&md5=881a0d4a8cf3a36eb4b108a631acd86d

Similar Items

Effect of NCO/OH ratio on physical and mechanical properties of castor-based polyurethane grouting materials
by: Hussain N.I.A.M.; Bonnia N.N.; Hirzin R.S.F.N.; Ali E.S.; Zawawi E.Z.E.
Published: (2019)

Preparation of castor-based polyurethane composites filled with waste carbon tyres (WCT) as grouting material
by: Hussain N.I.A.M.; Bonnia N.N.; Hirzin R.S.F.N.; Ali E.S.; Ratim S.
Published: (2020)

DIFFERENT TYPES OF POLYOLS AND ISCOCYANATE RATIO TO THE PHYSICAL, MECHANICAL, AND MORPHOLOGICAL PROPERTIES OF POLYURETHANE
by: Fauzi F.N.A.M.; Bonnia N.N.; Hussain N.I.A.M.; Anuar A.U.; Rahman Z.A.; Affandi N.D.N.; Zawawi E.Z.E.
Published: (2023)

Physical properties of a soy-based polyol as polyurethane coatings
by: Hussain N.I.A.M.; Bonnia N.N.; Ismail S.N.S.; Ramli R.; Surip S.N.
Published: (2018)

Rapid remediation using polyurethane foam/resin grout in Malaysia
by: Jais I.B.M.
Published: (2017)

Structural Properties of Regenerated Carbon Graphene Oxide (GO) Synthesized through Hummers and Improved Hummer's Method
by: Zainuri A.Z.; Bonnia N.N.; Affandi N.N.; Asli N.A.; Rahman Z.A.; Hanapi N.S.M.
Published: (2023)

Performance comparison between polyurethane foam and cement grouting slab replacement for soft ground improvement at shallow depth using finite element model
by: Lat D.C.; Jais I.B.M.; Ali N.; Baharom B.; Salleh S.M.; Omar A.
Published: (2020)

EFFECT OF DIFFERENT WEIGHT PERCENTAGES OF WASTE TIRE RECOVERED CARBON BLACK (RCB) ON THE STRUCTURAL AND MORPHOLOGICAL PROPERTIES OF GRAPHENE OXIDE (GO)
by: Anuar A.U.; Bonnia N.N.; Jamil N.M.; Hanapi N.S.M.; Zawawi E.Z.E.; Affandi N.D.N.
Published: (2024)

WATER AND AIR PERMEABILITY OF MELT-BLOWN POLYPROPYLENE FILLED RECOVERED CARBON GRAPHENE OXIDE
by: Affandi N.D.N.; Bonnia N.N.; Rahman Z.A.; Zawawi E.Z.E.
Published: (2022)

MORPHOLOGICAL ANALYSIS AND THERMOCHROMISM OF COMBAT FABRIC
by: Borhan I.Z.; Affandi N.D.N.; Kadir M.I.A.; Yahaya R.; Bonnia N.N.
Published: (2024)

Synthesis and Characterization of Geopolymer Grout from Fly Ash Class C
by: Ramasamy S.; Santiagoo R.; Ahmad R.; Kasmuri N.; Faris M.A.; Mohanad H.
Published: (2024)

Mechanical and Morphological Properties of Cellulosic Fabrics Treated with Microencapsulated Essential Oils
by: Indrie L.; Affandi N.D.N.; Díaz-García P.; Haji A.; Ilies D.C.; Zlatev Z.; Taghiyari H.R.; Grama V.; Farima D.
Published: (2022)

Effect of kenaf fiber loading on mechanical and morphological properties of polyurethane shape memory polymer composites
by: Khiyon N.H.; Arshad M.F.; Kamarudin M.K.; Fauzi N.M.
Published: (2024)

Physical Properties of Flexible Polyurethane waste as filler by difference Preparation Method
by: Atil A.A.; Hassan N.N.M.; Tungkiong F.A.J.; Raja Mamat T.N.A.; Yusop F.M.; Leman A.M.; Ishak I.A.; Roseli A.I.; Latif N.A.
Published: (2023)

Antinociception of petroleum ether fraction derived from crude methanol extract of Melastoma malabathricum leaves and its possible mechanisms of action in animal models
by: Zakaria Z.A.; Jaios E.S.; Omar M.H.; Abd. Rahman S.; Hamid S.S.A.; Ching S.M.; Teh L.K.; Salleh M.Z.; Deny S.; Taher M.
Published: (2016)

The Effects of Different Concentrations of Nanoclay in Polyvinyl Alcohol (PVA) nanofibres-Polyester Bilayer on Morphological Structure, Mechanical Properties, and Filtration of Direct Red Dye
by: Hami S.S.M.; Affandi N.D.N.; Mohd A.F.; Harun A.M.; Rahman M.A.A.; Indrie L.; Ahmad M.R.
Published: (2023)

Green Infrastructure: Materials and Applications
by: Hassan R.; Hamid N.H.A.; Arshad A.K.; Alisibramulisi A.; Sidek M.N.M.; Bhkari N.M.; Shaffie E.
Published: (2021)

The Physical and Sound Absorption Property of Lightweight Rigid Polyurethane Composite Reinforced Bamboo Fiber for Roof Applications
by: Roseli A.I.; Hassan N.N.M.; Leman A.M.; Latif N.A.; Aminanda Y.; Setyanto D.; Tajunnusa Y.; Areerob Y.; Nukunudompanich M.
Published: (2023)

Mechanical Spectroscopy of Multiwalled Carbon Nanotube-filled Polyurethane Nanocomposites
by: Abdullah S.A.; Frormann L.
Published: (2022)

Investigation of ethyl lactate as a green solvent for desorption of total petroleum hydrocarbons (TPH) from contaminated soil
by: Jalilian Ahmadkalaei S.P.; Gan S.; Ng H.K.; Abdul Talib S.
Published: (2016)

Graphene oxide nanoparticles synthesized from waste tires: A multi-faceted analysis of structure, morphology and antibacterial behavior
by: Anuar A.U.; Bonnia N.N.; Tarawneh M.A.; Affandi N.D.N.; Al Garalleh H.; Khouj M.; Fauzi F.N.A.M.; Jamil N.M.
Published: (2024)

Improvement of Moisture Management Properties of Face Masks Using Electrospun Nanofiber Filter Insert
by: Fadil F.; Affandi N.D.N.; Harun A.M.; Alam M.K.
Published: (2022)

Azadirachta excelsa as green corrosion inhibitor for mild steel in acidic medium
by: Mahat M.M.; Kamarudin M.S.; Isa J.; Bonnia N.N.; Jani N.A.
Published: (2012)

Physical and mechanical properties of thermoplastic natural rubber (TPNR) nanocomposites
by: Azlina H.N.; Norita H.; Ahmad S.H.; Rasid R.; Anuar H.; Bonnia N.N.; Surip S.N.
Published: (2012)

Green Infrastructure: Materials and Sustainable Management
by: Hashim U.R.; Arshad A.K.; Hamid N.H.A.; Hassan R.; Shaffie E.; Alisibramulisi A.; Bhkari N.M.; Sidek M.N.M.
Published: (2024)

Finishing Properties of Bleached and Unbleached Bio-polyurethane Wood Coating
by: James R.M.S.; Tahir P.M.; Yusof N.M.; Al-Edrus S.S.O.; Abidin Z.Z.; Uyup M.K.A.; Antov P.; Fatriasari W.; Lee S.H.
Published: (2024)

Isocyanate–free tannin–based polyurethane resins for enhancing thermo-mechanical properties of ramie (Boehmeria nivea L.) fibers
by: Lubis M.A.R.; Aristri M.A.; Sari R.K.; Iswanto A.H.; Al-Edrus S.S.O.; Sutiawan J.; Lee S.H.; Antov P.; Kristak L.
Published: (2024)

Dynamic mechanical properties of polyurethane shape memory polymer composites (smpc) with different volume fractions of chopped strand mat glass fiber
by: Khiyon N.H.; Rahman A.A.; Arshad M.F.; Kamarudin M.K.; Rahman S.T.A.
Published: (2018)

EFFECTS OF BAMBOO CHARCOAL ADDITION ON THE MECHANICAL AND THERMAL PROPERTIES OF POLY(LACTIC ACID)/POLYPROPYLENE BLEND NANOCOMPOSITES
by: Halim N.H.A.; Zawawi E.Z.E.; Yuhana N.Y.; Bonnia N.N.
Published: (2023)

Polylactic acid (PLA) incorporated with antimicrobial substances for fruit packaging - A review
by: Malek N.S.A.; Khuhairil M.; Khusaimi Z.; Bonnia N.N.; Mahmood M.R.; Asli N.A.
Published: (2021)

Mechanical properties and environmental stress cracking resistance of rubber toughened polyester/kenaf composite
by: Bonnia N.N.; Ahmad S.H.; Zainol I.; Mamun A.A.; Beg M.D.H.; Bledzki A.K.
Published: (2010)

Effects of Bleaching Treatment on the Properties of Bio-polyurethane Films from Liquefied Bamboo
by: James R.M.S.; Tahir P.M.; Yusof N.M.; Al-Edrus S.S.O.; Abidin Z.Z.; Palle I.; Uyup M.K.A.; Lee S.H.
Published: (2024)

Influence of calcination on mineralogical and strength properties of self activated green material (SAGreM)
by: Ridzuan A.R.M.; Sidek M.N.M.; Anuar K.A.
Published: (2019)

Assessment of contaminants in sand production from petroleum wells offshore Sabah
by: Shayuti M.S.M.; Zainal S.; Ya T.M.Y.S.T.; Abdullah M.Z.; Shahruddin M.Z.; Othman N.H.; Alias N.H.; Mohd T.A.T.; Sharudin R.W.
Published: (2023)

Effects of Bleaching Treatment on the Properties of Bio-polyurethane Films from Liquefied Bamboo
by: James, et al.
Published: (2024)

Isolation of potential total petroleum hydrocarbon degraders from river sediments
by: Yun C.T.S.; Huap A.C.
Published: (2010)

THE EFFECT OF NCO/OH EQUIVALENT WEIGHT RATIOS OF POLYURETHANE (PU) BINDER AND PU BINDER CONTENT ON PROPERTIES OF MEDIUM DENSITY FIBREBOARD (MDF)
by: Sattar M.N.; Ismail T.N.M.T.; Palam K.D.P.; Noor N.M.; Hanzah N.A.; Adnan S.; Kian Y.S.; Hasan Z.A.A.; Ahmad M.
Published: (2024)

Antimicrobial efficacy, antioxidant profile and nine alternative active constituents from petroleum ether and ethyl acetate extract of entada spiralis; [Keberkesanan antimikrob, profil antioksida dan sembilan komponen alternatif aktif dari ekstrak petroleum eter dan etil asetat dari pokok entada spiralis]
by: Harun A.; Aziz N.A.; Azenan N.S.M.; Kamarazzaman N.F.M.; Mat So’Ad S.Z.
Published: (2020)

Morphological, TGA, and FTIR on Rigid Polyurethane Composite Laminated with Untreated and Treated Bamboo Fiber Roof Insulation
by: Roseli A.I.; Hassan N.N.M.; Leman A.M.; Latif N.A.; Aminanda Y.; Setyanto D.; Tajunnisa Y.; Areerob Y.; Nukunudompanich M.; Azmi M.F.
Published: (2024)

Polymeric and non-polymeric nanofiber of Cinnamaldehyde from Cinnamon oil (Cinnamomum zeylanicum)
by: Moreta S.; Cahyono E.; Affandi N.D.N.; Fadil F.; Kurniawan C.
Published: (2020)