The role of sintering temperature and dual metal substitutions (Al3+, Ti4+) in the development of NASICON-structured electrolyte

QR Code

The role of sintering temperature and dual metal substitutions (Al3+, Ti4+) in the development of NASICON-structured electrolyte

The aim of this study is to synthesize Li1+xAlxTixSn2−2x(PO4) sodium super ion conductor (NASICON)-based ceramic solid electrolyte and to study the effect of dual metal substitution on the electrical and structural properties of the electrolyte. The performance of the electrolyte is analyzed based o...

Full description

Bibliographic Details
Published in:	Materials
Main Author:	Rusdi H.; Rusdi R.; Aziz S.B.; Alsubaie A.S.; Mahmoud K.H.; Kadir M.F.Z.
Format:	Article
Language:	English
Published:	MDPI 2021
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85120385783&doi=10.3390%2fma14237342&partnerID=40&md5=2c5c1d7d43ce023359cbcdc69e88d8c4

Similar Items

Effect of sintering temperature on zinc substituted calcium phosphate ceramics
by: Mardziah C.M.; Abdul Wahid M.F.; Hyie K.M.; Masdek N.R.N.; Salleh Z.
Published: (2017)

First Principles Investigation of NASICON-Structured LiTi2(PO4)3 and Mg0.5Ti2(PO4)3 Solid Electrolytes
by: Fami A.M.A.; Wahab N.A.; Rani M.S.A.; Yaakob M.K.; Mustaffa N.A.
Published: (2022)

Properties of stannum-based Li-NASICON-structured solid electrolytes for potential application in electrochemical devices
by: Mustaffa N.A.; Mohamed N.S.
Published: (2015)

Al doped LiNi0.6Co0.3-xTi0.1AlxO2 cathode material via combustion method
by: Wan Azizan W.A.H.; Firdaus Kasim M.; Rusdi R.; Elong K.
Published: (2020)

Wear properties of metal matrix composite Al-Cu and Al-Cu-TiB2
by: Ramli R.; Sulaiman S.; Shah Ismail M.I.; Mohamed Arif A.H.; Talari M.K.
Published: (2015)

Structural and morphological studies of novel nanostructured η-al2-xfexo3
by: Jasimin M.H.; Kamarulzaman N.; Badar N.; Rahman N.A.A.; Rusdi R.
Published: (2013)

The Densification of Hydroxyapatite from Eggshell Waste at Different Sintering Temperature
by: Nawawi N.A.; Ahmad N.N.A.; Hamdan N.H.I.N.; Bang L.T.
Published: (2023)

Sinterability of Calcium Phosphate through Rapid Sintering
by: Natasha A.N.; Ramesh S.; Tan C.Y.; Bang L.T.
Published: (2021)

Microstructure and mechanical properties of high speed steel with addition of ferrophosphorus on sintering temperature
by: Budin S.; Jaafar T.R.; Selamat M.A.
Published: (2016)

Optimizing the sintering parameter of metal injection molding compact using robust engineering technique
by: Jamaludin K.R.; Muhamad N.; Ahmad S.; Ibrahim M.H.I.; Mohd. Nor N.H.; Harun M.R.B.; Md. Daud M.Y.
Published: (2012)

Effect of Sintering Atmosphere on the Mechanical Properties of Sintered Tungsten Carbide
by: Budin S.; Jaafar T.R.; Selamat M.A.
Published: (2017)

The influence of sintering temperature to the structural and densification of silica doped zinc oxide for varistor application
by: Mohamed R.; Rasul N.F.A.; Yahya N.; Mamat H.; Malek M.F.; Ismail A.S.; Yusoff M.M.; Senawi S.A.; Rusop M.
Published: (2019)

The Effects of Nitrogen-Purged Thermal Debinding and Post-sintering Parameters on Metal Injection Moulded Pulverised Aluminium Alloy Swarf Binded with 100 Vol% of Palm Stearin
by: Yussoff S.B.; Mohamad Nor N.H.; Husain H.; Saedon J.B.
Published: (2024)

Physico-chemical Studies of Alkali-Free MgAl Layered Double Hydroxide for Electrolyte Conductivity Studies at Ambient Temperature
by: Ithnin M.S.Z.; Tajuddin N.A.; Hanibah H.
Published: (2024)

Influence of calcination temperature on the electrochemical behaviour of novel LiMn0.3Co0.3Ni0.3Cr0.1O2 Cathode Materials for high energy density li-ion batteries
by: Jaafar M.H.; Kamarulzaman N.; Elong K.; Mohamed N.S.; Rusdi R.
Published: (2013)

Effects of binders system on sintered properties of metal injection molding parts of M2 high speed steel
by: Sauti R.; Wahab N.A.; Omar M.A.; Ahmad I.N.
Published: (2014)

Influence of sintering temperature on the properties of the screen-printed anode of the LSMO4 Ruddlesden‒Popper perovskite for intermediate-temperature solid oxide fuel cells
by: Zainon A.N.; Somalu M.R.; Bahrain A.M.K.; Muchtar A.; Baharuddin N.A.; S.A M.A.; Abdul Samat A.; Osman N.; Azad A.K.
Published: (2023)

Chromium substituted liSn2P3O12 solid electrolyte
by: Norhaniza R.; Subban R.H.Y.; Mohamed N.S.; Ahmad A.
Published: (2012)

Effect of Different Stoichiometry on the Electrochemical Behaviour of LiCoxNi1-xO2 Cathode Materials
by: Elong K.; Kamarulzaman N.; Rusdi R.
Published: (2018)

Enhancing the sinterability of chemically-derived Tl1212 superconducting powders using nano-sized MgO as sintering aid
by: Salleh F.Md.; Yahya A.K.; Jumali M.H.
Published: (2012)

Band Gap Narrowing and Widening of ZnO Nanostructures and Doped Materials
by: Kamarulzaman N.; Kasim M.F.; Rusdi R.
Published: (2015)

Mitigating Hydroplaning Risk Through Real-Time Rainfall Detection and Speed Recommendations
by: Rusli, et al.
Published: (2024)

Effect of pH on the Crystal Growth of ZnO Nanomaterials and Their Band gap Energies
by: Kasim M.F.; Kamarulzaman N.; Rusdi R.; Rahman A.A.
Published: (2018)

Service quality attributes affecting the satisfaction of KTM Komuter services
by: Ab Karim, et al.
Published: (2024)

Band gap energies of Li2xMg(1-x)O materials synthesized by the sol-gel method
by: Chayed N.F.; Badar N.; Rusdi R.; Azahidi A.; Kamarulzaman N.
Published: (2013)

Adsorption and reversible detection of toxic halogens gases at room temperature by two-dimensional Al2SSe for occupational sustainability
by: Chang Y.H.R.; Yeoh K.H.; Jiang J.; Yu H.W.; Chang E.Y.; Dee C.F.; Tuh M.H.
Published: (2024)

Effect of sintering time on the purity and morphology of LiTaO 3
by: Zainuddin L.W.; Kamarulzaman N.
Published: (2012)

Effect of Sintering Temperature on AC Susceptibility and Superconducting Properties of (Bi1.6Pb0.4)Sr2CaCu2O8 Superconductor
by: Yusof N.M.; Bakar I.P.A.; Suib N.R.M.; Shukor R.A.; Mujaini M.; Abdullah H.; Humaidi S.; Azman N.J.
Published: (2024)

Effects of the absorption behaviour of ZnO nanoparticles on cytotoxicity measurements
by: Najim N.; Rusdi R.; Hamzah A.S.; Shaameri Z.; Mat Zain M.; Kamarulzaman N.
Published: (2014)

Effect of several calcination temperature on different concentration zinc substituted calcium phosphate ceramics
by: Wahid M.F.A.; Hyie K.M.; Mardziah C.M.; Nik Roselina N.R.
Published: (2015)

Effect of Eu substitution in low density Bi (Pb)-2223 high-temperature superconductors
by: Azhan H.; Azura C.M.N.; Azman K.; Senawi S.A.; Syuhaida I.N.; Robaiah M.; Rosli M.M.
Published: (2016)

Effects of TiO2 addition on ionic conductivity of PVC/PEMA blend based composite polymer electrolyte
by: Subban R.H.Y.; Sukri N.
Published: (2015)

Role of Electrolyte Concentration in Enhancing the Physical Properties on TiO2 Nanotube Arrays via Anodization Method
by: Azhar N.E.A.; Shariffudin S.S.; Munirah S.; Rani R.A.; Rusop M.
Published: (2019)

Effect of Metal Salts on Ionic Conductivity of Waste Cooking Oil Based Polyurethane Solid Polymer Electrolyte
by: Husin M.A.; Tahir S.M.
Published: (2018)

Limiting Molar Conductivity Behaviour of ENR-50 Electrolyte in Mixed Solvent System at Ambient Temperature
by: Tajudin M.A.M.; Hanibah H.; Darji D.
Published: (2023)

The effect of Fe and Al substitution in LiNi0.8Co0.2O2 cathode material
by: Mokhtar N.A.M.; Azahidi A.; Elong K.; Badar N.; Kamarulzaman N.
Published: (2014)

Structural and electrical characterization of hexanoyl chitosan- LiClO 4-TiO2-DMC polymer electrolytes
by: Muhammad F.H.; Subban R.H.Y.; Winie T.
Published: (2014)

Kulliyyāt Al-Tafsīr Dan Peranannya Dalam Pentafsiran Al-Quran
by: Ibrahim R.A.; Kadir M.N.A.; Hussin H.
Published: (2022)

Characterisation of Al2O3 doped hexanoyl chitosan-LiCF3SO3-EC polymer electrolytes
by: Muhammad F.H.; Subban R.H.Y.; Majid S.R.; Winie T.; Arof A.K.
Published: (2009)

Physical and Chemical Properties of Poly(ethylene)oxide Ternary Solid Polymer Electrolytes Based on Ni/Al Layered Double Hydroxide
by: Johari S.N.A.M.; Deraman S.K.; Hanibah H.; Tajuddin N.A.
Published: (2024)