Convergence Study for Rock Unconfined Compression Test Using Discrete Element Method

• Published in: International Journal of Integrated Engineering
• Main Author: Shahrin M.I.; Abdullah R.A.; Alel M.N.A.; Saari R.; Ibrahim N.A.; Yusof N.A.M.; Rashid M.F.A.
• Format: Article
• Language: English
• Published: Penerbit UTHM 2021
• Online Access: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85108528619&doi=10.30880%2fijie.2021.13.03.014&partnerID=40&md5=359a8c54d9e935af12b7ca46ef0ea7ea

Mesh convergence is a vital issue that needs to be addressed in a numerical model. This study investigated the effects of mesh element number on the Discrete Element Method (DEM) to granite rock response under compression loading. This study used the 3D finite-element code LS-DYNA to model the Unconfined Compression Test (UCT) numerical simulation. Models with five different mesh types were conducted for convergence mesh, namely normal mesh, fine mesh, super fine mesh, coarse mesh, and super coarse mesh. The mesh convergence of rock media has been conducted using DEM and steel plates simulated using the Finite Element Method (FEM). The DEM-FEM numerical analysis is compared with the results obtained from the experimental test. The best mesh was obtained as the simulation could reproduce the stress-strain curve trends, the failure behaviour and compression strength observed in the experimental test. The normal mesh was selected as the best mesh type in this study based on the comparisons that have been made. This study shows that the DEM-FEM numerical simulation can represent granite rock and can be used for further study based on mesh convergence. © Universiti Tun Hussein Onn Malaysia Publisher’s Office