Close Loop Feedback Direct Current Control in Driving Mode of a Four Quadarnts Drive Direct Current Chopper for Electric Vehicle Traction Controlled Using Fuzzy Logic
The direct current (DC) series motor is the highest starting torque motor compared to other motors with the same kilowatt power. The conventional speed controller that is used in an electric vehicle utilizes the series motor that can cause jerk and slip during start-up. This paper discusses the usag...
| Published in: | Advanced Structured Materials |
|---|---|
| Main Author: | |
| Format: | Book chapter |
| Language: | English |
| Published: |
Springer
2020
|
| Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85086127659&doi=10.1007%2f978-3-030-46036-5_7&partnerID=40&md5=6df2b713bcc85f1da10d94486c2144ac |
| Summary: | The direct current (DC) series motor is the highest starting torque motor compared to other motors with the same kilowatt power. The conventional speed controller that is used in an electric vehicle utilizes the series motor that can cause jerk and slip during start-up. This paper discusses the usage of a direct current control (DCC) in the four quadrants direct current chopper (FQDC) application to overcome the start-up problem. The series motor current is controlled in a closed-loop fashion using the fuzzy logic technique. The DCC is a current control method using a lookup table (LUT) with a predetermined reference current. The system is tested using MATLAB/Simulink. The simulation results using MATLAB/Simulink show that the current can be controlled using a fuzzy logic technique. © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020. |
|---|---|
| ISSN: | 18698433 |
| DOI: | 10.1007/978-3-030-46036-5_7 |