Electrochemical performance of La0.6Sr0.4CoO3-δ cathode in air and wet air for BaCe0.54Zr0.36Y0.1O3-based proton-conducting solid oxide fuel cell

QR Code

Electrochemical performance of La0.6Sr0.4CoO3-δ cathode in air and wet air for BaCe0.54Zr0.36Y0.1O3-based proton-conducting solid oxide fuel cell

Solid oxide fuel cell (SOFC) electrodes often suffer from degradation resulting from different contaminations such as water vapour from air during high-temperature operation. Thus, humidity-resistant electrode materials must be developed for SOFC application. In this work, La0.6Sr0.4CoO3-δ (LSC) mat...

Full description

Bibliographic Details
Published in:	IOP Conference Series: Earth and Environmental Science
Main Author:	Abdul Samat A.; Rao Somalu M.; Muchtar A.; Osman N.
Format:	Conference paper
Language:	English
Published:	Institute of Physics Publishing 2019
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85068689624&doi=10.1088%2f1755-1315%2f268%2f1%2f012136&partnerID=40&md5=5423613b425529d0ed72652824f23256

Similar Items

Phase formation and microstructure analyses of La0.6Sr0.4CoO3-δ-BaCe0.54Zr0.36Y0.1O2.95composite material prepared by solid state mixing method
by: Samat A.A.; Pisor M.S.A.A.; Tajudin M.A.F.M.A.; Nawi M.A.-H.M.; Darus M.; Osman N.; Baharuddin N.A.
Published: (2020)

Impedance Study on NiO-BaCe0.54Zr0.36Y0.1O2.95 Composite Anode for Proton-Conducting Fuel Cell
by: Senari S.M.; Osman N.; Jani A.M.M.
Published: (2018)

Effect of nickel oxide - Modified BaCe0.54Zr0.36Y0.1O2.95 as composite anode on the performance of proton-conducting solid oxide fuel cell
by: Abdul Malik L.; Mahmud N.A.; Mohd Affandi N.S.; Mazlan N.W.; Zakaria N.H.A.; Abd Malek N.I.; Hassan O.H.; Md Jani A.M.; Osman N.
Published: (2021)

Influence of different chemical agents on the thermal decomposition and phase formation of la0.6Sr0.4CoO3-δ material prepared through sol-gel method; [Pengaruh agen kimia berbeza terhadap penguraian terma dan pembentukan fasa bahan la0.6Sr0.4CoO3- δ yang disediakan melalui kaedah sol-gel]
by: Samat A.A.; Somalu M.R.; Muchtar A.; Rahman H.A.; Osman N.
Published: (2020)

Optimisation of screen-printed La0.6Sr0.4CoO3-δ cathode film for intermediate temperature proton-conducting solid oxide fuel cell application
by: Abdul Samat A.; Rao Somalu M.; Muchtar A.; Akidah Baharuddin N.; Osman N.
Published: (2019)

X-ray analyses and crystallography data of NiO – BaCe₀.54Zr₀.36Y0.1O2.95 composite anode for protonic ceramic fuel cell
by: Abdul Malik L.; Nik Mohamad Rosdi M.N.; Hassan O.H.; Md. Jani A.M.; Tseng C.-J.; Osman N.
Published: (2022)

Synthesis and characterization of carbon nanotubes and activated carbon assisted sol-gel derived La0.6Sr0.4CoO3-d material
by: Samat A.A.; Darus M.; Ismail I.; Somalu M.R.; Osman N.
Published: (2023)

Thermal decomposition, phase formation and microstructure analysis of surfactant assisted sol-gel derived La0.6Sr0.4CoO3-δ material
by: Samat A.A.; Alias S.H.; Darus M.; Somalu M.R.; Baharuddin N.A.; Osman N.
Published: (2020)

Electrochemical and material characteristics of Ba0.5Sr0.5Co0.8Fe0.2O3−δ-Sm0.2Ce0.8O1.9 carbonate perovskite cathode composite for low-temperature solid oxide fuel cell
by: Tan K.H.; Rahman H.A.; Azami M.S.; Yusop U.A.; Baharuddin N.A.; Ma'arof M.I.N.
Published: (2022)

Ba0.5sr0.5co0.8fe0.2o3-δ (bscf) perovskite nanorods by template synthesis
by: Habiballah A.S.; Mahmud A.H.; Osman N.; Jani A.M.M.
Published: (2016)

The interaction between Co and Mn ions on the magnetic frustration and the inducement of the double-exchange mechanism in hole-doped La0.6 Dy0.1 Ca0.3 Co1-x MnxO3 (x = 0–1.0) cobaltite
by: Ahmad N.; Rajmi R.; Mohamed Z.
Published: (2023)

Effect of Varying Temperatures on the Electrochemical Performance of Lithium-Ion Batteries Using LiNi0.3Mn0.3Co0.3Ti0.1O2 Cathode Materials
by: Elong K.; Kasim M.F.; Badar N.; Azahidi A.; Osman Z.
Published: (2024)

Al doped LiNi0.6Co0.3-xTi0.1AlxO2 cathode material via combustion method
by: Wan Azizan W.A.H.; Firdaus Kasim M.; Rusdi R.; Elong K.
Published: (2020)

The synthesis of VACNTs grown on MgxZn1-xO (0< x <0.3) template
by: Muhamad S.; Abu Bakar S.; Ahmad R.; Ahmad A.; Siran Y.M.; Rejab S.A.M.; Jaril Asis A.; Tahirruddin S.; Abdullah S.; Rusop M.
Published: (2011)

Influence of calcination temperature on the electrochemical behaviour of novel LiMn0.3Co0.3Ni0.3Cr0.1O2 Cathode Materials for high energy density li-ion batteries
by: Jaafar M.H.; Kamarulzaman N.; Elong K.; Mohamed N.S.; Rusdi R.
Published: (2013)

In-Situ catalytic surface modification of micro-structured La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) Oxygen Permeable Membrane Using Vacuum-Assisted technique
by: Othman N.H.; Shahruddin M.Z.; Sihar A.S.; Wu Z.; Li K.
Published: (2016)

Effect of TiO2 nanoparticles on the horizontal hardness properties of Sn-3.0Ag-0.5Cu-1.0TiO2 composite solder
by: Mohd Nasir S.S.; Yahaya M.Z.; Erer A.M.; Illés B.; Mohamad A.A.
Published: (2019)

Effect of fe3+ partial substitution at mn-site on electroresistance behaviour in la0.7ba0.3mn1-xfexo3 (x = 0 and 0.02) manganites
by: Muhammad Suffian S.; Norazila I.; Zakiah M.; Rozilah R.; Ahmad Kamal Y.
Published: (2021)

The modifications in structural, optical, and electro-magnetic phase transition of Vanadium-doped La-based manganite ceramics La0.7Pb0.3Mn1−yVyO3 (y = 0 – 0.1)
by: Zainuddin M.A.I.; Rozilah R.; Ibrahim N.; Mohamed Z.
Published: (2024)

The modifications in structural, optical, and electro-magnetic phase transition of Vanadium-doped La-based manganite ceramics La0.7Pb0.3Mn1_yVyO3 (y=0-0.1)
by: Zainuddin, et al.
Published: (2024)

Low third-order intermodulation distortion in Ba0.6Sr0.4TiO3 thin film interdigital capacitors
by: Abdul Khalid M.F.; Fardin E.A.; Scott J.R.; Holland A.S.; Ghorbani K.
Published: (2013)

The Structural and Magnetic Transition Behaviour Analysis of La0.7Pb0.3MnO3 Perovskite-Type Manganites
by: Zainuddin M.A.I.; Rahim A.A.; Mohamed Z.
Published: (2023)

Synthesis Of Bi1.6Pb0.4Sr2Ca2Cu3O10+δ - (Dy2O3)x Added With Magnetic Nanoparticles Dy2O3 Dysprosium oxide (0.0 < x < 0.1) Via Co - Precipitation method
by: Suib N.R.M.; Mahmud P.N.S.M.; Yahya S.Y.S.; Jusoh M.M.; Hamadneh I.
Published: (2014)

Phases of LiMn1.84V0.06Ti0.1O4 cathode material
by: Zainol N.H.; Kamarulzaman N.; Osman Z.; Fadzil A.F.M.; Yahya N.F.
Published: (2017)

Phase formation and critical temperature of (Tl0.5Pb0.5)Sr2Ca(Cu2-xCrx)O7-δ (x = 0 - 0.100) superconductor; [Pembentukan Fasa dan Suhu Genting Superkonduktor (Tl0.5Pb0.5)Sr2Ca(Cu2-xCrx)O7-δ (x = 0 - 0.100)]
by: YuSrianto E.; Jannah A.N.; Abd-Shukor R.
Published: (2021)

Electroresistance effect due to mo substitution at mn-site in monovalent doped la0.85ag0.15mn1-xmoxo3 (x = 0.00 and 0.05) manganites
by: Muhammad Syazwan M.S.; Nur Ain Athirah C.A.; Norazila I.
Published: (2021)

Investigation of crystal structural and magnetic properties of titanium doped Pr0.67Ba0.33MnO3 perovskite manganites
by: Amaran N.A.; Ibrahim N.; Mohamed Z.
Published: (2023)

Investigation of crystal structural and magnetic properties of titanium doped Pr0.67Ba0.33MnO3 perovskite manganites
by: Amaran, et al.
Published: (2023)

Current induced effect on the resistivity in La0.8-xDyxNa0.2MnO3monovalent doped manganites
by: Zaquan Mohd Zin A.; Sumaiyah Sheikh Abdul Aziz S.; Mohamed Z.; Ibrahim N.
Published: (2024)

Conductivity studies on Li 1-XAl xTi 2-X(PO 4) 3 (X=0.0-0.5) due to the addition of Al 3+ trivalent cation
by: Hamidi M.; Mohamed S.N.; Yahya M.Z.A.
Published: (2012)

Fe doped LiNi0.8Co0.15Al0.05 O2 (NCA) cathode materials: Synthesis, structural and morphological studies
by: Isti'Adzah L.; Kasim M.F.; Elong K.A.; Azahidi A.; Saaid F.I.; Mohamad A.A.
Published: (2023)

Electrical transport and low-field magnetoresistance properties of (La 1-xYbx)2/3Ca1/3MnO3 (x=0 to 0.12) ceramics
by: Aini N.A.; Yusof M.I.M.; Huda N.; Mohamed Z.; Yahya A.K.
Published: (2009)

Effects of annealing temperature on RF behaviour of Mg 0.2Zn 0.8O thin films
by: Ahmad R.; Nadzar H.; Teh A.; Kara M.; Awang Z.; Salina M.; Mamat M.H.; Rusop M.
Published: (2011)

RF characterization of Mg 0.2Zn 0.8O thin film capacitors for MMIC applications
by: Ahmad R.; Salina M.; Sulaiman S.; Teh A.; Kara M.; Rusop M.; Awang Z.
Published: (2011)

Effect of annealing time on the structural stability of LiCo0.55Ni0.4Ti0.05O2 cathode material via combustion method
by: Azahidi A.; Kasim M.F.; Elong K.; Kamarulzaman N.
Published: (2023)

The effect of Fe and Al substitution in LiNi0.8Co0.2O2 cathode material
by: Mokhtar N.A.M.; Azahidi A.; Elong K.; Badar N.; Kamarulzaman N.
Published: (2014)

Corrosion behavior of 0.02-2.0wt% Vanadium alloyed grey iron
by: Alias S.K.; Abdullah B.; Idham M.F.; Latip S.A.; Rahman H.A.; Jahidi H.
Published: (2011)

Prediction of the 96.5Sn-3.0Ag-0.5Cu Stress–Strain Curves Using Artificial Neural Network
by: Yamin A.F.M.; Mahmud J.; Abdullah A.S.; Manan N.F.A.
Published: (2024)

Intermetallic evolution of Sn-3.5Ag-1.0Cu-0.1Zn/Cu interface under thermal aging
by: Yahya I.; Ghani N.A.A.; Abiddin N.N.Z.; Hamidi A.H.; Mayappan R.
Published: (2013)

Microwave absorption properties of monovalent doped la0.85ag0.15mno3 manganites prepared by solid state method
by: Nur Ain Athirah C.A.; Norazila I.; Zaiki A.; Raba’Ah Syahidah A.; Muhammad Syazwan M.; Ahmad Kamal Y.
Published: (2021)