Rheological behavior of Zirconia Added alumina mixture

• Published in: International Journal of Engineering and Technology(UAE)
• Main Author: Aziz S.N.A.; Saidi W.S.S.W.; Bakar M.A.A.; Ismail M.H.
• Format: Article
• Language: English
• Published: Science Publishing Corporation Inc 2018
• Online Access: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85056719348&doi=10.14419%2fijet.v7i4.26.22177&partnerID=40&md5=d655bba162198dcdd0c5ac208e171979

Zirconia and alumina are one of the materials that is widely used in medical industry. Zirconia Toughened Alumina (ZTA) have great properties to be apply in the ceramic injection molding such as have high hardness and high strength. The powder used in this research are alumina and zirconia while the binder to be used in this research is using 100% single based binder of palm stearin (PS). Behavior of zirconia blended alumina was investigated by rheological testing at temperature 55°C. Two formulations were used which is 60% (alumina/zirconia) plus 40% PS and 64% (alumina/zirconia) plus 36% PS. The ratio of alumina and zirconia used in this research is fixed at (85:15) for both samples. Four basic process involved which is mixing process, injection molding, thermal debinding and sintering process has been implemented to complete ceramic injection molding (CIM). Sample were performed the thermal debinding at a heating rate 0.5°C/min up to 700°C and sintering at heating rate 3°C/min for temperature 1400°C and 1600°C. The hardness was tested using Rockwell hardness test for both AZ60 and AZ64 sample. Highest hardness was obtained from the sample AZ64 at the temperature 1600 °C which is 109HRR compare to the 1400°C that achieved 95.3HRR. © 2018 Authors.