Morphology and mechanical properties fabricated from Ti, Nb and HA by powder metallurgy method

QR Code

Morphology and mechanical properties fabricated from Ti, Nb and HA by powder metallurgy method

Hydroxyapatite (HA) is a bioactive ceramic material with poor mechanical properties which hinders its application in bone implant. However, HA has a similar structure to bone and can promote the growth of natural tissues. Combining the low modulus β-type Titanium (Ti) based alloy (e.g:Ti-40Nb) which...

Full description

Bibliographic Details
Published in:	Journal of Physics: Conference Series
Main Author:	Ahmad F.N.; Hussain Z.
Format:	Conference paper
Language:	English
Published:	Institute of Physics Publishing 2018
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85054927447&doi=10.1088%2f1742-6596%2f1082%2f1%2f012083&partnerID=40&md5=4b931107553fffbb2f357c1b662e2df8

Similar Items

Morphological and optical properties of Nb-doped ZnO nanoparticles
by: Eswar K.A.; Mohamad M.; Md Akhir R.; Mashjur I.N.Z.; Zamri N.Z.; Rostan N.F.; Buniyamin I.; Khairul Azhar N.A.; Wan Harrum W.M.; Malek M.F.; Khusaimi Z.; Suhaimi M.H.F.; Mahmood M.R.; Abdullah S.
Published: (2022)

Thermal analysis and microstructural study of porous β-TiNb incorporated with Tih 2 powder via low-cost processing route
by: Hosnie S.M.; Yahaya M.; Haris N.A.; Ismail M.H.
Published: (2018)

Effect of Nb-doped TiO2 on nanocomposited aligned ZnO nanorod/TiO2:Nb for dye-sensitized solar cells
by: Saurdi I.; Shafura A.K.; Azhar N.E.A.; Ishak A.; Malek M.F.; Alrokayan A.H.S.; Khan H.A.; Mamat M.H.; Rusop M.
Published: (2016)

Mechanical and Morphological Properties of Cellulosic Fabrics Treated with Microencapsulated Essential Oils
by: Indrie L.; Affandi N.D.N.; Díaz-García P.; Haji A.; Ilies D.C.; Zlatev Z.; Taghiyari H.R.; Grama V.; Farima D.
Published: (2022)

Surface Modification of Ti-Nb Alloy in Alkaline Solution to Enhance Bioactivity
by: Basry N.A.A.; Zuhailawati H.; Shariff K.A.; Anis A.L.; Darham W.
Published: (2023)

A modified sol-gel method for preparing nanostructured Nb-doped TiO 2 DSSC photoanode
by: Musa M.Z.; Mamat M.H.; Abdullah M.H.; Malek M.F.; Nor A.M.; Rasheid N.A.; Noor U.M.; Rusop M.
Published: (2012)

The Optimization of the Hydroxyapatite (HA) Material Characteristics Produced from Corbiculacea (Etok) Shells
by: Roslan M.R.; Nasir N.F.M.; Khalid M.F.A.; Mohammad N.F.; Meng C.E.; Hashim N.N.N.; You B.C.; Majid M.S.A.; Amin N.A.M.
Published: (2019)

The Dielectric Characterization of Tapioca Starch - Ha Tissue Scaffold
by: Fazli Mohd Nasir N.; Ee Meng C.; Jamal N.; Riza Mohd Roslan M.; Aerina Fitri Mohd Hoři N.; Chong You B.; Jusoh M.; Azizan M.; Zakimi Zakaria M.; Farid Abdul Khalid M.
Published: (2020)

Synthesized Hydroxyapatite Powder from Clamshell via Chemical Precipitation Method
by: Ali N.H.M.; Subuki I.; Hussain Ismail M.
Published: (2014)

Fabrication of ZnO Nanostructures Doped with Nb at Different Concentration as a Argon Sensor
by: Suhaimi M.H.F.; Ambo N.A.N.; Lutfi A.; Masjhur Masjhur I.N.Z.; Eswar K.A.; Rouhi J.; Mahmood M.R.
Published: (2023)

Influence of Hydroxyapatite Particle Size on the Flowability of PLA/HA Filament
by: Mustaza N.M.; Salleh F.M.; Rahmat S.I.; Marzuki A.P.; Tharazi I.; Ismail M.H.; Murat B.I.S.
Published: (2024)

Engineering the properties of Nb2O5-ZnO nanostructures via dual synthesis techniques
by: Rani R.A.; Omar F.N.; Fadzilah Suhaimi M.H.; Zoolfakar A.S.; Mamat M.H.; Alrokayan S.; Khan H.A.; Mahmood M.R.
Published: (2018)

The Characterization of Bario Rice Starch-nanoHA Scaffolds using SEM and Dielectric Measurement
by: Roslan M.R.; Nasir N.F.M.; Khalid M.F.A.; Cheng E.M.; Amin N.A.M.; Mohammad N.; Beh C.Y.; Majid M.S.A.
Published: (2019)

Morphology and mechanical properties of polylactide/montmorillonite composites
by: Ibrahim N.; Jollands M.; Parthasarathy R.
Published: (2019)

MORPHOLOGICAL ANALYSIS AND THERMOCHROMISM OF COMBAT FABRIC
by: Borhan I.Z.; Affandi N.D.N.; Kadir M.I.A.; Yahaya R.; Bonnia N.N.
Published: (2024)

Effect of Using Windscreen Glass Waste Powder (WGWP) As Cement Replacement on the Mechanical Properties of Mortar
by: Anisah N.N.; Awang M.; Kartini K.
Published: (2020)

Surface Morphology of Fabricated TiO2-Graphene Thin Film by Spin-Coating Technique for pH Sensing Electrode Application
by: Daud A.N.; Syakirah Mohd Masri A.; Kamarozaman N.S.; Alhadi Zulkefle M.; Zulkifli Z.; Herman S.H.
Published: (2023)

Optical gas sensing properties of nanoporous Nb2O5 films
by: Ab Kadir R.; Rani R.A.; Alsaif M.M.Y.A.; Ou J.Z.; Wlodarski W.; O'Mullane A.P.; Kalantar-Zadeh K.
Published: (2015)

DIFFERENT TYPES OF POLYOLS AND ISCOCYANATE RATIO TO THE PHYSICAL, MECHANICAL, AND MORPHOLOGICAL PROPERTIES OF POLYURETHANE
by: Fauzi F.N.A.M.; Bonnia N.N.; Hussain N.I.A.M.; Anuar A.U.; Rahman Z.A.; Affandi N.D.N.; Zawawi E.Z.E.
Published: (2023)

Conductivity, Morphology and Thermal Studies of Polyaniline Fabrics
by: Mahat M.M.; Aizamddin M.F.; Roslan N.C.; Kamarudin M.A.; Omar S.N.I.; Halim M.I.A.; Mazo M.M.
Published: (2020)

The Morphological and Structural Properties of Chromium (Cr)doped Titanium Dioxide (TiO2) Nanoparticles prepared via Sol–gel Method at Various Concentrations
by: Noor N.H.M.; Jaya Saputra N.S.S.M.N.; Kamil S.A.; Mahmood M.R.; Fadzil A.F.M.; Supardan S.N.
Published: (2024)

Effect of space holders on fabrication of porous titanium alloy-hydroxyapatite composite through powder injection molding
by: Salleh F.M.; Sulong A.B.; Raza M.R.; Muhamad N.; Fhang L.T.
Published: (2017)

Mechanical Properties of Laminated Veneer Lumber (LVL) Fabricated from Three Malaysian Hardwood Species
by: Bhkari N.M.; Chen L.W.; Nordin M.S.; Zainal N.S.; Za’ba N.I.L.; Ahmad Z.
Published: (2023)

Physical and mechanical properties of portland cement-bonded flakeboards fabricated from macaranga gigantea and neolamarckia cadamba
by: Noor Azrieda A.R.; Razali A.K.; Rahim S.; Izran K.
Published: (2012)

Morphological, Structural and Optical Properties of Er3+-Doped SiO2-TiO2 Nanofiber
by: Razali N.S.; Supardan S.N.; Yunus R.M.; Kamil S.A.
Published: (2024)

Morphological, Structural and Optical Properties of Er3+-Doped SiO2-TiO2 Nanofiber
by: Razali, et al.
Published: (2024)

Community structure, population dynamics and biomass estimation of Bombacaceae in the 50 ha plot at Pasoh Forest Reserve, Negeri Sembilan, Malaysia
by: Fitri Z.A.; Bassa N.S.A.; Hazlan N.H.N.; Norafida N.A.N.; Latiff A.
Published: (2024)

Study of the synthesis of zirconia powder from zircon sand obtained from zircon minerals malaysia by caustic fusion method
by: Subuki I.; Mohsin M.F.; Ismail M.H.; Fadzil F.S.M.
Published: (2020)

The structure of epitaxial growth of Nb-doped ZnO nanorods on intrinsic substrate via sonicated aqueous chemical method
by: Eswar K.A.; Rostan N.F.; Mohamad M.; Md Akhir R.; Khairul Azhar N.A.; Buniyamin I.; Azhar N.E.; Malek M.F.; Suhaimi M.H.F.; Mahmood M.R.; Abdullah S.
Published: (2024)

Nanoporous Nb2O5 hydrogen gas sensor
by: Rani R.A.; Zoolfakar A.S.; Oua J.Z.; Field M.R.; Austin M.; Kalantar-Zadeh K.
Published: (2013)

Morphological Characteristics and Mechanical Properties of Quarry Dust Waste as Sand Replacement in Mortar
by: Yosri N.F.A.M.; Jumahat A.; Hashim U.R.; Sidek M.N.M.; Haris N.A.
Published: (2024)

Morphology, Mechanical and Neutron attenuating properties of carbon black filled EPDM / HDPE composites
by: Abdulrahman S.T.; Ahmad Z.; Thomas S.; Rahman A.A.
Published: (2020)

Fabrication and structural properties of flower-like TiO2 nanorod array films grown on glass substrate without FTO layer
by: Musa M.Z.; Mamat M.H.; Vasimalai N.; Shameem Banu I.B.; Malek M.F.; Ahmad M.K.; Suriani A.B.; Mohamed A.; Rusop M.
Published: (2020)

Porous NiTi Dental Implant Fabricated by a Metal Injection Molding: An in Vivo Biocompatibility Evaluation in an Animal Model
by: Mustafa, et al.
Published: (2023)

The Effect of Scandium (Sc) onto Mechanical Properties and Morphologies of Aluminium-Silicon (Al-Si) Alloy
by: Basir N.N.A.; Ramli R.; Mahat M.M.; Osman S.; Yahaya S.M.; Masdek N.R.N.M.
Published: (2023)

Natural Weathering Effects on the Mechanical, Rheological, and Morphological Properties of Magnetorheological Elastomer (MRE) in Tropical Climate
by: Johari M.A.F.; Mazlan S.A.; Ubaidillah U.; Nordin N.A.; Ahmad Khairi M.H.; Abdul Aziz S.A.; Sedlacik M.; Nikmat Leong S.A.
Published: (2022)

Mechanical, Thermal and Morphological Properties of Woven Kenaf Fiber Reinforced Polylactic Acid (PLA) Composites
by: Nor M.A.M.; Sapuan S.M.; Yusoff M.Z.M.; Zainudin E.S.
Published: (2022)

Morphology, Isothermal Crystallization Kinetics and Mechanical Properties of Polyvinyl Alcohol/Aloe Vera Electrospun Nanofibers
by: Surip S.N.; Fatriansyah J.F.; Sekak K.A.; Salleh N.A.M.; Federico A.; Abdullah Shukry N.A.
Published: (2023)

Mechanical, Morphological and Thermal Properties of Woven Polyester Fiber Reinforced Polylactic Acid (PLA) Composites
by: Azlin M.N.M.; Sapuan S.M.; Zuhri M.Y.M.; Zainudin E.S.
Published: (2022)

The Influence of Alkaline Treatment on Mechanical Properties and Morphology of Rice Husk Fibre Reinforced Polylactic Acid
by: Farah Dina A.; Siti Zaleha S.; Noor Najmi B.; Nor Azowa I.
Published: (2014)