Effect of Sintering Atmosphere on the Mechanical Properties of Sintered Tungsten Carbide

QR Code

Effect of Sintering Atmosphere on the Mechanical Properties of Sintered Tungsten Carbide

One of the crucial stages in fabrication of WC-Co composite is sintering process. Inappropriate sintering state, especially sintering temperature will lead to an abnormal grain growth and thus reduce the mechanical properties of the sintered parts. Sintering atmosphere also plays a big role in oxida...

Full description

Bibliographic Details
Published in:	MATEC Web of Conferences
Main Author:	Budin S.; Jaafar T.R.; Selamat M.A.
Format:	Conference paper
Language:	English
Published:	EDP Sciences 2017
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-85033382197&doi=10.1051%2fmatecconf%2f201713003006&partnerID=40&md5=215ae96e1130c3cf83fc3ef158db0f95

Similar Items

Microstructure and mechanical properties of high speed steel with addition of ferrophosphorus on sintering temperature
by: Budin S.; Jaafar T.R.; Selamat M.A.
Published: (2016)

Sinterability of Calcium Phosphate through Rapid Sintering
by: Natasha A.N.; Ramesh S.; Tan C.Y.; Bang L.T.
Published: (2021)

Enhancing the sinterability of chemically-derived Tl1212 superconducting powders using nano-sized MgO as sintering aid
by: Salleh F.Md.; Yahya A.K.; Jumali M.H.
Published: (2012)

Effect of sintering temperature on zinc substituted calcium phosphate ceramics
by: Mardziah C.M.; Abdul Wahid M.F.; Hyie K.M.; Masdek N.R.N.; Salleh Z.
Published: (2017)

Effect of sintering time on the purity and morphology of LiTaO 3
by: Zainuddin L.W.; Kamarulzaman N.
Published: (2012)

Effects of binders system on sintered properties of metal injection molding parts of M2 high speed steel
by: Sauti R.; Wahab N.A.; Omar M.A.; Ahmad I.N.
Published: (2014)

Exploring the physical behavior of surface-functionalized two-dimensional Tungsten carbide/nitride MXenes
by: Ul Haq B.; Kim S.-H.; Ahmed R.; Taib M.F.M.; Rasool Chaudhry A.; Seddik T.; Laref A.
Published: (2024)

Exploring the physical behavior of surface-functionalized two-dimensional Tungsten carbide/nitride MXenes
by: Ul Haq, et al.
Published: (2024)

The Densification of Hydroxyapatite from Eggshell Waste at Different Sintering Temperature
by: Nawawi N.A.; Ahmad N.N.A.; Hamdan N.H.I.N.; Bang L.T.
Published: (2023)

Synthesis and Sintering Impact on the Properties of Willemite Based Glass-Ceramics Using Rice Husk Waste as Silica Source
by: Wahab R.A.A.; Zaid M.H.M.; Matori K.A.; Halimah M.K.; Sidek H.A.A.; Fen Y.W.; Abdu A.; Shofri M.F.M.; Jaafar S.H.
Published: (2022)

Optimizing the sintering parameter of metal injection molding compact using robust engineering technique
by: Jamaludin K.R.; Muhamad N.; Ahmad S.; Ibrahim M.H.I.; Mohd. Nor N.H.; Harun M.R.B.; Md. Daud M.Y.
Published: (2012)

The influence of sintering temperature to the structural and densification of silica doped zinc oxide for varistor application
by: Mohamed R.; Rasul N.F.A.; Yahya N.; Mamat H.; Malek M.F.; Ismail A.S.; Yusoff M.M.; Senawi S.A.; Rusop M.
Published: (2019)

Influence of sintering temperature on the properties of the screen-printed anode of the LSMO4 Ruddlesden‒Popper perovskite for intermediate-temperature solid oxide fuel cells
by: Zainon A.N.; Somalu M.R.; Bahrain A.M.K.; Muchtar A.; Baharuddin N.A.; S.A M.A.; Abdul Samat A.; Osman N.; Azad A.K.
Published: (2023)

The role of sintering temperature and dual metal substitutions (Al3+, Ti4+) in the development of NASICON-structured electrolyte
by: Rusdi H.; Rusdi R.; Aziz S.B.; Alsubaie A.S.; Mahmoud K.H.; Kadir M.F.Z.
Published: (2021)

Optimising sintering parameters on the characteristic of injection moulded 316L stainless steel utilising water soluble system
by: Omar N.F.; Wahab N.; Ahmad I.N.; Sulong N.
Published: (2019)

Effect of Sintering Temperature on AC Susceptibility and Superconducting Properties of (Bi1.6Pb0.4)Sr2CaCu2O8 Superconductor
by: Yusof N.M.; Bakar I.P.A.; Suib N.R.M.; Shukor R.A.; Mujaini M.; Abdullah H.; Humaidi S.; Azman N.J.
Published: (2024)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
by: Ibrahim K.A.; Wu B.; Brandon N.P.
Published: (2016)

The Effects of Nitrogen-Purged Thermal Debinding and Post-sintering Parameters on Metal Injection Moulded Pulverised Aluminium Alloy Swarf Binded with 100 Vol% of Palm Stearin
by: Yussoff S.B.; Mohamad Nor N.H.; Husain H.; Saedon J.B.
Published: (2024)

Improving the mechanical properties and curing characteristics of styrene-butadiene rubber/butadiene rubber composites by incorporating silicon carbide
by: Zabihi A.; Fasihi M.; Rasouli S.; Wati Sharudin R.
Published: (2024)

Effect of Coated Tungsten Disulfide (WS2) on Tapered Optical Fibre for Urea Detection
by: Burham N.; Bachok N.; Ali N.; Othman A.R.; Arsad N.; Awang A.H.; Isa N.M.; Li Z.
Published: (2024)

Investigation of optical properties and radioactive attenuation parameters of doped tungsten oxide soda lime silica SLS waste glass
by: Khazaalah T.H.; Mustafa I.S.; Aloraini D.A.; Hisam R.; Mohd Zaid M.H.; Halimah M.K.; Sayyed M.I.; Izwan Abdul Malik M.F.; Almuqrin A.H.; Ezra N.S.; Naeem H.S.
Published: (2022)

The effect of annealing time on tungsten-doped vanadium dioxide by using sol-gel spin coating method
by: Hashim H.; Mohamed A.S.; Ibrahim M.Y.; Shariffudin S.S.; Sarah M.S.P.
Published: (2020)

Variability of optical properties for atmospheric aerosol in Kuching city using AERONET Sunphotometer
by: Asmat A.; Jalal K.A.; Ahmad N.
Published: (2012)

The combined technique of regional atmospherically correction
by: Arnis A.; Manan W.N.A.; Ahmad N.N.; Mansor S.B.
Published: (2014)

Correcting Atmospheric Effects on the InSAR Measurements using GPS Data
by: Ab Latip A.S.; Ansar A.M.H.; Md Din A.H.; Balogun A.L.
Published: (2022)

All Fiber Thermo-Optic Polarization Modulator with Chromium Carbide
by: Tan S.J.; Chang S.H.; Cheng X.S.; Tiu Z.C.; Haris H.; Muhammad A.R.; Markom A.M.; Harun S.W.
Published: (2024)

The fabrication and indentation of cubic silicon carbide diaphragm for acoustic sensing
by: Zawawi S.A.; Hamzah A.A.; Majlis B.Y.; Mohd-Yasin F.
Published: (2021)

Chemical properties and breakthrough adsorption study of activated carbon derived from carbon precursor from carbide industry
by: Husain N.C.; Zawawi N.A.; Hamzah F.; Rodhi M.N.M.; Veny H.; Ariyanti D.; Mohidem N.A.
Published: (2023)

Atmospheric transmittance modeling in urban and rural area
by: Alias A.N.; Mat Jafri M.Z.; Lim H.S.; Saleh N.M.
Published: (2011)

Effectiveness of Carbide Lime Waste as CO2 Capturing Materials of Mortar at Early CO2 Curing Age
by: Fadhlullah A.; Priandita B.R.; Talip A.R.A.; Khalid N.H.A.
Published: (2023)

Effect of Transition Metals Addition on the Nickel Oxide Catalyst Toward Reduction Behaviour in Carbon Monoxide Atmosphere
by: Dzakaria N.; Lahuri A.H.; Salleh F.; Saharuddin T.S.T.; Samsuri A.; Yarmo M.A.
Published: (2023)

A comparison study on mechanical properties of virgin and recycled polylactic acid (PLA)
by: Budin S.; Maideen N.C.; Koay M.H.; Ibrahim D.; Yusoff H.
Published: (2019)

Polyaniline (PANI)-conjugated tungsten disulphide (WS2) nanoparticles as potential therapeutics against brain-eating amoebae
by: Abdelnasir S.; Mungroo M.R.; Shahabuddin S.; Siddiqui R.; Khan N.A.; Ahmad I.; Anwar A.
Published: (2022)

Q-Switched Pulse Generation in Erbium-based with Niobium Aluminium Carbide Saturable Absorber
by: Ghafar N.A.M.A.; Markom A.M.; Rosol A.H.A.; Zulkipli N.F.; Omar S.; Muhammad A.R.; Haris H.; Saad I.; Harun S.W.
Published: (2024)

Development of a digital receiver for range imaging atmospheric radar
by: Yamamoto M.K.; Fujita T.; Abdul Aziz N.H.B.; Gan T.; Hashiguchi H.; Yu T.-Y.; Yamamoto M.
Published: (2014)

Growth analysis of Shorea platycarpa in response to elevated atmospheric carbon dioxide
by: Nor Lailatul Wahidah M.; Nizam M.S.; Wan Juliana W.A.; Che Radziah C.M.Z.; Fathurrahman F.; Wan Nur Ain N.
Published: (2016)

Effects of Elevated Atmospheric CO2 on Photosynthesis, Growth and Biomass in Shorea platycarpa F. Heim (Meranti Paya)
by: Nor Lailatul Wahidah M.; Wan Juliana W.A.; Nizam M.S.; Che Radziah C.M.Z.
Published: (2017)

Effect of Granite Fly Ash on Mechanical Properties of Basalt and Glass Fiber Reinforced Polymer Composite
by: Jaafar M.A.; Abdullah S.A.; Jumahat A.; Hashim U.R.; Muslim M.A.; Shah R.M.R.A.; Loy R.S.T.
Published: (2024)

Q-Switched Pulse Generation in Erbium-Doped Fiber Laser Cavity with Vanadium Aluminum Carbide Absorber
by: Ghafar N.A.M.A.; Zulkipli N.F.; Omar S.; Markom A.M.; Yasin M.; Harun S.W.
Published: (2022)

Generation of soliton mode-locked erbium-doped fibre laser with vanadium aluminum carbide thin film
by: Ghafar N.A.M.A.; Zulkipli N.F.; Rosol A.H.A.; Zaidan A.H.; Yhuwana Y.G.Y.; Markom A.M.; Yasin M.; Harun S.W.
Published: (2023)