Mild steel sheet metal forming using abaqus software: Influence of drawbeads in minimize springback
Introduction of drawbeads can minimize the springback.Springback which in the elastic recovery occurs after the sheet metal forming process will result inaccurate geometry of the deformed parts.The objectives of this project are to study the influence of various geometries of the drawbead to the spr...
Published in: | ARPN Journal of Engineering and Applied Sciences |
---|---|
Main Author: | Khamis N.A.; Zin S.M.; Bahari A.R. |
Format: | Article |
Language: | English |
Published: |
Asian Research Publishing Network
2016
|
Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84994225822&partnerID=40&md5=cd08f1e0ff6c907c5edb9c56ae379919 |
Similar Items
-
Sheet Metal Forming Analysis of Aluminium Alloy AA6061 using |Altair INSPIRE Form Simulation
by: Tharazi, et al.
Published: (2024) -
The optimization of CNT-PVA nanocomposite for mild steel coating: Effect of CNTs concentration on the corrosion rate of mild steel
by: Maryam M.; Ibrahim N.M.A.A.; Eswar K.A.; Guliling M.; Suhaimi M.H.F.; Khusaimi Z.; Abdullah S.; Rusop M.
Published: (2018) -
Fibre orientation of novel dynamically sheet formed discontinuous natural fibre PLA composites
by: Efendy M.G.A.; Pickering K.L.
Published: (2016) -
Corrosion inhibition of mild steel by electrodeposited poly(M-aminophenol) coating
by: Sabrina M.Y.; Mohamad Kamal H.; Ismaniza I.; Rosmamuhamadani R.
Published: (2021) -
Azadirachta excelsa as green corrosion inhibitor for mild steel in acidic medium
by: Mahat M.M.; Kamarudin M.S.; Isa J.; Bonnia N.N.; Jani N.A.
Published: (2012)