Anode fabrication for solid oxide fuel cells: Electroless and electrodeposition of nickel and silver into doped ceria scaffolds

QR Code

Anode fabrication for solid oxide fuel cells: Electroless and electrodeposition of nickel and silver into doped ceria scaffolds

A novel fabrication method using electroless and electrodeposited Ni/Ag/GDC for SOFC anodes is presented. First a porous Ce0.9Gd0.1O2-x (GDC) scaffold was deposited on a YSZ electrolyte by screen printing and sintering. The scaffold was then metallized with silver using Tollens' reaction, follo...

Full description

Bibliographic Details
Published in:	International Journal of Hydrogen Energy
Main Author:	Jamil Z.; Ruiz-Trejo E.; Boldrin P.; Brandon N.P.
Format:	Article
Language:	English
Published:	Elsevier Ltd 2016
Online Access:	https://www.scopus.com/inward/record.uri?eid=2-s2.0-84992305093&doi=10.1016%2fj.ijhydene.2016.04.061&partnerID=40&md5=a152fd9941b17610d6d7d6dd5991bf79

Similar Items

Challenges in using perovskite-based anode materials for solid oxide fuel cells with various fuels: a review
by: Zainon A.N.; Somalu M.R.; Kamarul Bahrain A.M.; Muchtar A.; Baharuddin N.A.; S.A M.A.; Osman N.; Abdul Samat A.; Azad A.K.; Brandon N.P.
Published: (2023)

Low nickel, ceria zirconia-based micro-tubular solid oxide fuel cell: A study of composition and oxidation using hydrogen and methane fuel
by: Shabri H.A.; Rudin S.N.F.M.; Deraman S.; Rahman M.A.; Othman M.H.D.; Jamil S.M.; Kurniawan T.A.; Li T.; Bakar S.A.; Osman N.; Jaafar J.; Rahman M.A.; Ismail A.F.
Published: (2021)

Electrical conductivity and porosity in stainless steel 316L scaffolds for electrochemical devices fabricated using selective laser sintering
by: Ibrahim K.A.; Wu B.; Brandon N.P.
Published: (2016)

Optimization analysis of solid oxide fuel cells with ceria-based single cells using computational fluid dynamics
by: Huai T.K.; Azami M.S.M.; Rahman H.A.; Rahman N.F.A.; Tukimon M.F.; Jaidi Z.H.; Yusop U.A.
Published: (2024)

Effect of nickel oxide - Modified BaCe0.54Zr0.36Y0.1O2.95 as composite anode on the performance of proton-conducting solid oxide fuel cell
by: Abdul Malik L.; Mahmud N.A.; Mohd Affandi N.S.; Mazlan N.W.; Zakaria N.H.A.; Abd Malek N.I.; Hassan O.H.; Md Jani A.M.; Osman N.
Published: (2021)

Sol-gel based copper metallic layer as external anode for microtubular solid oxide fuel cell
by: Shabri H.A.; Rudin S.N.F.M.; Othman M.H.D.; Jamil S.M.; Kamal S.N.E.A.M.; Abu Bakar S.; Osman N.; Jaafar J.; Rahman M.A.; Ismail A.F.
Published: (2022)

Developing Nickel/Graphene Nano Sheets as an alternative primary battery anode
by: Siburian R.; Paiman S.; Hutagalung F.; Marwan Ali A.M.; Simatupang L.; Goei R.; Rusop M.M.
Published: (2022)

Recent progress in ceria-based catalysts for the dry reforming of methane: A review
by: Teh L.P.; Setiabudi H.D.; Timmiati S.N.; Aziz M.A.A.; Annuar N.H.R.; Ruslan N.N.
Published: (2021)

Influence of sintering temperature on the properties of the screen-printed anode of the LSMO4 Ruddlesden‒Popper perovskite for intermediate-temperature solid oxide fuel cells
by: Zainon A.N.; Somalu M.R.; Bahrain A.M.K.; Muchtar A.; Baharuddin N.A.; S.A M.A.; Abdul Samat A.; Osman N.; Azad A.K.
Published: (2023)

Rational design of N-doped C-encapsulated flower-like nickel-based heterostructured microsphere anodes for high-capacity and stable lithium storage
by: Yu Z.; Abidin S.Z.; Toyong N.M.P.; Zhao X.
Published: (2023)

Rational design of N-doped C-encapsulated flower-like nickel-based heterostructured microsphere anodes for high-capacity and stable lithium storage
by: Yu, et al.
Published: (2023)

The Effect of Nutrients in Anodic Chamber to the Performance of Microbial Fuel Cell (MFC)
by: Ujai, et al.
Published: (2024)

The Effect of Nutrients in Anodic Chamber to the Performance of Microbial Fuel Cell (MFC)
by: Ujai N.U.M.; Sahari S.K.; Sawawi M.; Kipli K.; Awang A.; Mahmood M.R.; Hasanah L.; Kram A.R.; Ngaini Z.
Published: (2024)

Structural and conductivity of nio-bczy anode functional layer for proton conducting fuel cell
by: Lidyayatty A.M.; Nurul Waheeda M.; Nur Nadhihah M.T.; Oskar H.H.; Abdul Mutalib M.J.; Nafisah O.
Published: (2021)

Engineering electrodeposited ZnO films and their memristive switching performance
by: Zoolfakar A.S.; Ab Kadir R.; Rani R.A.; Balendhran S.; Liu X.; Kats E.; Bhargava S.K.; Bhaskaran M.; Sriram S.; Zhuiykov S.; O'Mullane A.P.; Kalantar-Zadeh K.
Published: (2013)

Fabrication of Flexible Au/ZnO/ITO/PET Memristor Using Dilute Electrodeposition Method
by: Fauzi F.B.; Ani M.H.; Othman R.; Azhar A.Z.A.; Mohamed M.A.; Herman S.H.
Published: (2015)

Effect of the Electrodeposition Cycle of RGO Towards Glucose Detection
by: Ilias M.H.; Khairudin N.; Zoolfakar A.S.; Zolkapli M.; Zain Z.M.; Fitrah Abu Bakar N.; Rani R.A.; Manut A.
Published: (2023)

Effect of time depositions on electrodeposited cobalt-iron nanocoating
by: Abdullah W.N.R.; Hyie K.M.; Resali N.A.; Chong W.T.
Published: (2012)

Crystallization of electrodeposited germanium thin film on silicon (100)
by: Abidin M.S.Z.; Matsumura R.; Anisuzzaman M.; Park J.-H.; Muta S.; Mahmood M.R.; Sadoh T.; Hashim A.M.
Published: (2013)

Simulation And Analysis Of Calorific Value For Biomass Solid Waste As A Potential Solid Fuel Source For Power Generation
by: Kamaruddin N.A.B.; Ghani W.A.W.A.K.; Hamid M.R.A.; Alias A.B.; Shamsudin A.H.
Published: (2023)

Surface Properties of Nanostructured Gold Coatings Electrodeposited at Different Potentials
by: Mohd Zaki M.H.; Mohd Y.; Chin L.Y.
Published: (2020)

Recurrent neural networks optimization of biomass-based solid oxide fuel cells combined with the hydrogen fuel electrolyzer and reverse osmosis water desalination
by: Hai T.; Ashraf Ali M.; Alizadeh A.; Zhou J.; Dhahad H.A.; Kumar Singh P.; Fahad Almojil S.; Ibrahim Almohana A.; Fahmi Alali A.; Shamseldin M.
Published: (2023)

Corrosion inhibition of mild steel by electrodeposited poly(M-aminophenol) coating
by: Sabrina M.Y.; Mohamad Kamal H.; Ismaniza I.; Rosmamuhamadani R.
Published: (2021)

Enhancing the current density of electrodeposited ZnO-Cu 2O solar cells by engineering their heterointerfaces
by: Zoolfakar A.S.; Rani R.A.; Morfa A.J.; Balendhran S.; O'Mullane A.P.; Zhuiykov S.; Kalantar-Zadeh K.
Published: (2012)

The physical and magnetic properties of electrodeposited co-fe nanocoating with different deposition times
by: Mei Hyie K.; Abdullah W.N.R.; Resali N.A.; Chong W.T.; Salleh Z.; Ghani M.A.A.
Published: (2013)

Co-extruded triple-layer micro-tubular solid oxide fuel cell: The influence of cathode extrusion rate on the fuel cell properties and performance
by: Ab Rahman M.; Othman M.H.D.; Fansuri H.; Harun Z.; Abdul Rahman M.; Jaafar J.; Ismail A.F.; Osman N.; Rajamohan N.
Published: (2024)

Anodization voltage effect on physical properties of anodic TiO2nanotube arrays film
by: Azhar N.E.A.; Munirah S.; Rani R.A.; Shuhaimi A.; Malek M.F.; Mamat M.H.; Shariffudin S.S., et al.
Published: (2020)

Analysis of Electric Signals from Micro-Solid Oxide Fuel Cell Sensors Detecting Methane Biogas
by: Ninwijit T.; Palamnit A.; Luengchavanon M.; Marthosa S.; Osman N.; Chowdhury S.; Niyomwas S.
Published: (2022)

Structural properties of anodic titanium dioxide (TiO2) nanotubes film via electrochemical anodization
by: Azhar N.E.A.; Shariffudin S.S.; Rani R.A.; Munirah S.; Nagaoka S.; Rusop M.
Published: (2019)

Coupling heterostructure of thickness-controlled nickel oxide nanosheets layer and titanium dioxide nanorod arrays via immersion route for self-powered solid-state ultraviolet photosensor applications
by: Yusoff M.M.; Mamat M.H.; Abdullah M.A.R.; Ismail A.S.; Malek M.F.; Zoolfakar A.S.; Al Junid S.A.M.; Suriani A.B.; Mohamed A.; Ahmad M.K.; Shameem Banu I.B.; Rusop M.
Published: (2020)

Electrodeposited Cu2O Microstructure as an Effective Ultraviolet (UV) Sensor Operating at Low Bias Voltages
by: Zulkifli M.H.; Rani R.A.; Saad N.H.; Makhsin S.R.; Mamat M.H.; Mahmood M.R.; Zoolfakar A.S.
Published: (2019)

Physical characterization of LSCF-NiO as cathode material for intermediate temperature solid oxide fuel cell (IT-SOFCs)
by: Rosli A.Z.; Somalu M.R.; Osman N.; Hamid N.A.
Published: (2020)

Modification of a screen-printed carbon electrode with nanoporous gold by electrodeposition and dealloying of a gold-copper alloy
by: Azman N.A.; Mohd Y.; Zain Z.M.; Chin L.Y.
Published: (2023)

Characterization study of oily sludge produced from north refineries company baiji to determine the suitability for conversion into solid fuel
by: Abdulqader M.A.; Syed-Hassan S.S.A.; Jawad A.H.; Habeeb O.A.
Published: (2021)

Nickel oxide nanoparticles for Q-switching pulses generation
by: Musa B.; Zain N.A.M.; Zulkipli N.F.; Harun S.W.; Jusoh Z.
Published: (2019)

Nickel loading on the isothermal carburation of molybdenum trioxide catalyst
by: Samsuri A.; Rahim N.S.A.; Jamal S.H.; Latif M.N.; Dzakaria N.; Salleh F.; Saharuddin T.S.T.; Yusop M.R.
Published: (2024)

Comparison analysis of hydrogen addition into both anode and afterburner of fuel cell incorporated with hybrid renewable energy driven SOFC: An application of techno-environmental horizon and multi-objective optimization
by: Hai, et al.
Published: (2024)

Seed/catalyst-free vertical growth of high-density electrodeposited zinc oxide nanostructures on a single-layer graphene
by: Aziz N.S.A.; Mahmood M.R.; Yasui K.; Hashim A.M.
Published: (2014)

Impedance Study on NiO-BaCe0.54Zr0.36Y0.1O2.95 Composite Anode for Proton-Conducting Fuel Cell
by: Senari S.M.; Osman N.; Jani A.M.M.
Published: (2018)

Cobalt-nickel-iron nanoparticles coated on stainless steel substrate
by: Resali N.A.; Hyie K.M.; Berhan M.N.; Salleh Z.; Kasolang S.
Published: (2013)